Drive temperature broken

[Ubsefor]

The script somehow breaks synology drive temperature reporting, it gets stuck at 29C constantly, while smartmontools report correct temperature

[007revad]

Do you mean smartctl?

Which Synology model and DSM version?

[Ubsefor]

Do you mean smartctl?

Yes, smartctl -a /dev/block | grep "Temp" shows correct temperature, its also shown correctly in "scrutiny"
Right now I’m patching synodrivedb.db by hand, we'll see if that will help

UPD: It did not, I believe this is due to model.dtb edits; drive info also contains firmware version, which it did not have before the patch

Which Synology model and DSM version?

SA6400, 7.2.2-72806

[007revad]

syno_hdd_db only edits model.dtb if the script detects a E10M20-T1, M2D20, M2D18 or M2D17 connected to a NAS model that does not officially support them and the E10M20-T1, M2D20, M2D18 or M2D17 is not already in model.dtb.

So the script would not touch model.dtb on a SA6400