From b4a0adf5babe182e7f8906452fa349afe7cc693c Mon Sep 17 00:00:00 2001 From: Ulf D <1coderookie@quantentunnel.de> Date: Fri, 26 Jan 2024 18:12:34 +0100 Subject: [PATCH] Update printhead.md --- docs/hardware/printhead.md | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/docs/hardware/printhead.md b/docs/hardware/printhead.md index bc74c3d..b33cf94 100644 --- a/docs/hardware/printhead.md +++ b/docs/hardware/printhead.md @@ -38,9 +38,11 @@ The following pictures show the printhead with the blue plastic cover from vario The printhead itself is mounted to a metal plate which is running along the [x-axis gantry](axes.md#x-axis-gantry). + The following picture shows the four screws which are being used to mount the printhead onto the plate. @@ -150,7 +152,7 @@ The procedure about how to adjust the position will be described for the specifi The following picture shows the location of the ABL sensor at the printhead, looking at it from a bottom view angle - the ABL sensor is the part at the right side with the round orange tip. -![Orange tip of the ABL sensor at the right side](../assets/images/head_K2Neo_underside_web.jpg) +![Orange tip of the ABL sensor at the right side](../assets/images/head_K2_bottomview_web.jpg) The ABL sensor itself is mounted in a plastic bracket which is then mounted to the metal backplate.