Blobvault v1

You can read the documentation at apiary

Blobvault v1

Welcome to the Blobvault v1 API. This API provides access to the Ripple Blobvaut.

Blobvault Links

There are three types of signing, HMAC-RECOV, HMAC and ECDSA

Group ECDSA-RECOV signing

This signature is specifically for account recovery. Applicable for requesting the encrypted blob and the encrypted_blobdecrypt_key

GET /your/path{?signature,signature_date,signature_type,signature_username}

Parameters
- signature_username (required, string,<ripple username>)
- signature_date (required, string, 2014-05-19T17:21:34.000Z) ... the date string
- signature_type (required, string, RIPPLE1-ECDSA-SHA512)
- signature (required, string, AAAAHC2k5dWAnmC7zXr2N0ZEDbiF0kNQxHgf1xS-bixub5pmQFo-SMcDe0U-n6jkGaFrKfOn7NAlraTogHISkdzyUDY) ... the computed signature based on the public key signed by the secret.
Response 200

Group ECDSA Signing

example:'https://id.staging.ripple.com/v1/user?signature=AAAAHC2k5dWAnmC7zXr2N0ZEDbiF0kNQxHgf1xS-bixub5pmQFo-SMcDe0U-n6jkGaFrKfOn7NAlraTogHISkdzyUDY&signature_date=2014-05-19T17:21:34.000Z&signature_blob_id=92da7f762e240b40c23c1f15c55cee6f488c8cc8adfea079d5e738b5b152ab2b&signature_account=rfaPezp7ShpR2c89J3pZehnXHmSKd85MCY&signature_type=RIPPLE1-ECDSA-SHA512'

In this example we just use GET but it applies to any HTTP Method (GET, POST) that is marked as using ECDSA

GET /your/path{?signature_account,signature_type,signature,signature_date,signature_blob_id}

Parameters
- signature_account (required, string,rwUNHL9AdSupre4tGb7NXZpRS1ift5sR7W) ... the public key of the user
- signature (required, string, AAAAHC2k5dWAnmC7zXr2N0ZEDbiF0kNQxHgf1xS-bixub5pmQFo-SMcDe0U-n6jkGaFrKfOn7NAlraTogHISkdzyUDY) ... the computed signature
- signature_date (required, string, 2014-05-19T17:21:34.000Z) ... the date string
- signature_blob_id (required, string,003bb8cfbe753657d312de52bb9863ace009e649712157d6a71fdb14a6ff249c) ... the hexadecimal id
- signature_type (required, string, RIPPLE1-ECDSA-SHA512) ... for ECDSA use this exact string
Response 200

Group HMAC Signing

In this example we use GET but it can apply to any HTTP Method for any route marked using HMAC

GET /your/path{?signature,signature_blob_id,signature_date}

Parameters
- signature (required, string) ... the HMAC signature
- signature_blob_id (required, string) ... the blob id
- signature_date (required, string) ... the date string
Response 200

Group Creating a user - uses ECDSA

POST /v1/user

Request (application/json)

  {
      "address": "",
      "encrypted_blobdecrypt_key": "",
      "blob_id" : "",
      "username" : "",
      "auth_secret": "",
      "data" : "",
      "email" : "",
      "hostlink" : "",
      "encrypted_secret" : "",
      "origin" : "<origin field e.g. Ripple Trade>"
  }

Response 201 (application/json)
```
   {
   "result" : "success"
   }
```

Response 400 (application/json)

  { 
  "result" : "error",
  "message" : ""
  }

Group Deleting a user - uses ECDSA

example: DELETE /v1/user/foo will delete user foo

DELETE /v1/user/{username}

Parameters
- username (required, string) ... the username to delete
Response 200 (application/json)
```
  {
  result: "success"
  }
```
Response 400 (application/json)
```
  { 
  "result" : "error",
  }
```

Group Looking up a user - by username

GET /v1/user/{username}

Parameters
- username (required, string) ... the username to lookup

Response 200 (application/json)

  {
  username : "<username>",
  version : 3,
  address : "<ripple address>",
  exists : true (or false),
  "version":3,
  "blobvault":"http://<blobvault url>",
  "pakdf":
      {
       "host":"auth1.ripple.com",
       "url":"https://auth1.ripple.com/api/sign",
      "exponent":"010001",
      "alpha":"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",
      "modulus":"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"
      }
  }

Group Looking up a user - by address

GET /v1/user/{address}

Parameters
- address (required, string) ... the address of user to lookup

Response 200 (application/json)

  {
  username : "<username>",
  version : 3,
  address : "<ripple address>",
  exists : true,
  "version":3,
  "blobvault":"http://<blobvault url>",
  "pakdf":
      {
       "host":"auth1.ripple.com",
       "url":"https://auth1.ripple.com/api/sign",
      "exponent":"010001",
      "alpha":"7283d19e784f48a96062271a4fa6e2c3addf14e6edf78a4bb61364856d580f13552008d7b9e3b60ebd9555e9f6c7778ec69f976757d206134e54d61ba9d588a7e37a77cf48060522478352d76db000366ef669a1b1ca93c5e3e05bc344afa1e8ccb15d3343da94180dccf590c2c32408c3f3f176c8885e95d988f1565ee9b80c12f72503ab49917792f907bbb9037487b0afed967fefc9ab090164597fcd391c43fab33029b38e66ff4af96cbf6d90a01b891f856ddd3d94e9c9b307fe01e1353a8c30edd5a94a0ebba5fe7161569000ad3b0d3568872d52b6fbdfce987a687e4b346ea702e8986b03b6b1b85536c813e46052a31ed64ec490d3ba38029544aa",
      "modulus":"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"
      }
  }

Group Looking up a user via querstring

Example: /v1/authinfo?username=foo

GET /v1/authinfo{?username}

Response 200 (application/json)

  {
  username : "<username>",
  version : 3,
  address : "<ripple address>",
  exists : true,
  "version":3,
  "blobvault":"http://<blobvault url>",
  "pakdf":
      {
       "host":"auth1.ripple.com",
       "url":"https://auth1.ripple.com/api/sign",
      "exponent":"010001",
      "alpha":"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",
      "modulus":"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"
      }
  }

Group 2FA - Setting Two Factor Authentication 2FA Settings - uses ECDSA

POST /v1/blob/{blob_id}/2FA

Parameters
- blob_id (required,string) ... the blob id

Request (application/json)

  {
      "remember_me" : true,
      "enabled" : true,
      "phone" : "<phone number>",
      "country_code" : "<country_code>",
      "via" : "sms"
  }

Response 200 (application/json)

  { 
      "result" : "success",
      "message" : "<message>"
  }

Group 2FA - Getting Two Factor Authentication 2FA Settings - uses ECDSA

GET /v1/blob/{blob_id}/2FA{?device_id}

Ex. /v1/blob//2FA?device_id=57261be82601452ada0f2795bc709734

Parameters
- blob_id (required,string) ... the blob id
- device_id (optional, string,57261be82601452ada0f2795bc709734) ... 256 bit random number in hex

Response 200 (application/json)

  { 
      "result" : "success",
      "device_id" : "<device_id>", (if device id is supplied)
      "is_auth" : true, (if device id is supplied)
      "remember_me" : true,  
      "enabled" : true,
      "country_code": "<country_code",
      "masked_phone" : "<masked phone number>",
      "via" : "sms"
  }

Group 2FA - Request 2FA Token

This is not a signed request but requires the blob id. No device ID required.

GET /v1/blob/{blob_id}/2fa/requestToken

Response 200 (application/json)

  {
      "result" : "success",
      "message" : "<message>"
  }

Group 2FA - Verify Device Token

This is not a signed request but requires the blob id. Client supplies device ID.

POST /v1/blob/{blob_id}/2fa/verifyToken

Request (application/json)

  {
      "device_id" : "<device_id>",
      "token" : "<token>"
  }

Response 200 (application/json)

  {
      "result" : "success",
      "message" : "<message>"
  }

Group Recovering a user blob - uses ECDSA-RECOV

GET /v1/user/recov/{username}

Parameters
- username (required, string) ... the username to lookup

Response 200 (application/json)

  {
      `result` : `success`,
      `blob` : `<blob data base64>`,
      `encrypted_secret` : `<encrypted secret>`,
      `revision` : `<revision number>`,
      `patches` : `<list of patches>`,
      `blob_id` : `<blob_id>`,
      `encrypted_blobdecrypt_key` : `<encrypted_blobdecrypt_key>`,
      `missing_user_fields` : `<missing user fields>`
  }

Response 400 (application/json)
```
  { 
      result : "error" 
  }
```

Group Setting a user blob and fields - uses ECDSA

This is meant to be used for either resetting the blob after client blob recovery, or this can be used password change, where all the listed fields in the request must be changed.

Since this endpoint changes the blob_id, please note to use the old blob_id for the ECDSA signature.

POST /v1/user/{username}/updatekeys

Parameters
- username (required, string) ... represents the old username we want to change

Request (application/json)

  {
      `blob_id`: `<new blob id>`,
      `data` : `<data base64>`,
      `revision`: `<last known revision>`,
      `encrypted_secret` : `<encrypted_secret>`,
      `encrypted_blobdecrypt_key` : `<encrypted_blobdecrypt_key>`
  }

Response 200 (application/json)
```
  {   
      result : 'success'
  }
```
Response 400 (application/json)
```
  { 
      result : "error" 
  }
```

Group Renaming a user - uses ECDSA

Since this endpoint changes the blob_id, please note to use the old blob_id for the ECDSA signature.

POST /v1/user/{username}/rename

Parameters
- username (required, string) ... represents the old username we want to change

Request (application/json)

  {
      `blob_id`: `<new blob id>`,
      `username`: `<new username>`,
      `data` : `<data base64>`,
      `revision`: `<last known revision>`,
      `encrypted_secret` : `<encrypted_secret>`
  }

Response 200 (application/json)
```
  {   
      result : 'success'
  }
```
Response 400 (application/json)
```
  { 
      result : "error" 
  }
```

Group Changing email address - uses ECDSA

POST /v1/user/email

Request (application/json)

  {
      email : "<email address>",
      blob_id : "<blob id>",
      username : "<username>",
      hostlink : "<hostlink>"
  }

Response 200 (application/json)
```
  {
      result : "success"
  }
```
Response 400 (application/json)
```
  { 
      result : "error" 
  }
```

Group Resending Email - uses ECDSA

POST /v1/user/email/resend

Request (application/json)

  {
      email : "<email address>",
      username : "<username>",
      hostlink : "<hostlink>"
  }

Response 200 (application/json)
```
  {
      result : "success"
  }
```
Response 400 (application/json)
```
  { 
      result : "error" 
  }
```

Group Verifying Email Token

GET /v1/user/{username}/verify/{token}

Parameters
- username ... string
- token ... string
Response 200 (application/json)
```
  { 
      "result" : "success"
  }
```

Group Requesting Phone Token

POST /v1/user/{username}/phone

Parameters
- username ... string

Request (application/json)

  {
      via:'sms',
      phone_number:"<phone number>",
      country_code:"<country code>"
  }

Response 200 (application/json)
```
  { 
      "result" : "success"
  }
```
Response 400 (application/json)
```
  { 
      "result" : "error"
  }
```

Group Validating Phone Token

POST /v1/user/{username}/phone/validate

Parameters
- username ... string

Request (application/json)

  {
      phone_number:"<phone number>",
      country_code:"<country code>",
      token : "<token>"
  }

Response 200 (application/json)
```
  { 
      "result" : "success"
  }
```
Response 400 (application/json)
```
  { 
      "result" : "error"
  }
```

Group Adding Profile Detail - uses HMAC

Choose any number of the following to add

POST /v1/user/{username}/profile

Request (application/json)

  {
      "phone" : "<phone number>",
      "country" : "<country>",
      "region" : "<region>",
      "city" : "<city>"
  }

Response 200 (application/json)
```
  { 
      "result" : "success"
  }
```

Group Retrieve a blob

GET /v1/blob/{blob_id}{?device_id}

Parameters
- blob_id (required,string) ... the blob id
- device_id (optional, string) ... client produced id for two-factor auth (2fa)

Response 200 (application/json)

  {   
      result: 'success',
      encrypted_secret : '<base 64 encrypted secret>',
      blob : '<base 64 blob data>',
      revision : '<revision number>',
      email: '<email address>',
      quota: '<disk usage>',
      patches: '<array of patches>',
      twofactor: {
          enabled: <boolean>,
          is_auth: <boolean>,
          remember_me: <boolean>,
          masked_phone: "***-***-5555",
          via:"sms"
      } (only if device_id has attempted auth)
  }

Response 400 (application/json)
```
  { 
      result : "error" 
  }
```

Group Add a blob patch - uses HMAC

POST /v1/blob/patch

Request (application/json)

  {
    blob_id : "<blob id>"
    patch: "<blob patch>"
  }

Response 201 (application/json)

  {
    result: "success",
    revision: "<revision number>"
  }

Response 400 (application/json)
```
  { 
      result : "error" 
  }
```

Group Get a blob Patch

GET /v1/blob/{blob_id}/patch/{patch_id}

Parameters
- blob_id ... string
- patch_id ... string

Response 200 (application/json)

  { 
      result : "success",
      patch : "<patch>"
  }

Response 400 (application/json)
```
  { 
      result : "error" 
  }
```

Group Consolidate a set of blob patches - uses HMAC

POST /v1/blob/consolidate

Request (application/json)

  { data : "<data>",
    revision : "<revision number>",
    blob_id : "<blob_id>"
  }

Response 200 (application/json)
```
  { 
      "result" : "success"
  }
```
Response 400 (application/json)
```
  { 
      result : "error" 
  }
```

Group Service Health

GET /health

Response 200 (application/json)
```
  {
      status : 'ok'
  }
```
Response 500 (application/json)
```
  {
      status : 'not ok'
      
  }
```

Name		Name	Last commit message	Last commit date
Latest commit History 577 Commits
api		api
docs		docs
emailcampaign		emailcampaign
env		env
error		error
guard		guard
health		health
lib		lib
migrations		migrations
test		test
tools		tools
.gitignore		.gitignore
.travis.yml		.travis.yml
Dockerfile		Dockerfile
README.md		README.md
blob_api_test.py		blob_api_test.py
blob_api_test.sh		blob_api_test.sh
config-example.js		config-example.js
config.js		config.js
fig.yml		fig.yml
knexfile-example.js		knexfile-example.js
knexfile.js		knexfile.js
migration.js		migration.js
notes.txt		notes.txt
package.json		package.json
postInstall.js		postInstall.js
postgres.sql		postgres.sql
remote-connection-test.js		remote-connection-test.js
requirements.txt		requirements.txt
schema_base		schema_base
server.js		server.js
test-ecdsa-sig-observ.js		test-ecdsa-sig-observ.js
test-health.js		test-health.js
test.sh		test.sh
testreporter.js		testreporter.js

42cc/ripple-blobvault

Folders and files

Latest commit

History

Repository files navigation

Blobvault v1

Blobvault Links

Group ECDSA-RECOV signing

GET /your/path{?signature,signature_date,signature_type,signature_username}

Group ECDSA Signing

GET /your/path{?signature_account,signature_type,signature,signature_date,signature_blob_id}

Group HMAC Signing

GET /your/path{?signature,signature_blob_id,signature_date}

Group Creating a user - uses ECDSA

POST /v1/user

Group Deleting a user - uses ECDSA

DELETE /v1/user/{username}

Group Looking up a user - by username

GET /v1/user/{username}

Group Looking up a user - by address

GET /v1/user/{address}

Group Looking up a user via querstring

GET /v1/authinfo{?username}

Group 2FA - Setting Two Factor Authentication 2FA Settings - uses ECDSA

POST /v1/blob/{blob_id}/2FA

Group 2FA - Getting Two Factor Authentication 2FA Settings - uses ECDSA

GET /v1/blob/{blob_id}/2FA{?device_id}

Group 2FA - Request 2FA Token

GET /v1/blob/{blob_id}/2fa/requestToken

Group 2FA - Verify Device Token

POST /v1/blob/{blob_id}/2fa/verifyToken

Group Recovering a user blob - uses ECDSA-RECOV

GET /v1/user/recov/{username}

Group Setting a user blob and fields - uses ECDSA

POST /v1/user/{username}/updatekeys

Group Renaming a user - uses ECDSA

POST /v1/user/{username}/rename

Group Changing email address - uses ECDSA

POST /v1/user/email

Group Resending Email - uses ECDSA

POST /v1/user/email/resend

Group Verifying Email Token

GET /v1/user/{username}/verify/{token}

Group Requesting Phone Token

POST /v1/user/{username}/phone

Group Validating Phone Token

POST /v1/user/{username}/phone/validate

Group Adding Profile Detail - uses HMAC

POST /v1/user/{username}/profile

Group Retrieve a blob

GET /v1/blob/{blob_id}{?device_id}

Group Add a blob patch - uses HMAC

POST /v1/blob/patch

Group Get a blob Patch

GET /v1/blob/{blob_id}/patch/{patch_id}

Group Consolidate a set of blob patches - uses HMAC

POST /v1/blob/consolidate

Group Service Health

GET /health

About

Resources

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages