Blockchain Wallet API V2

Programmatically interface with your Blockchain.info wallet.

Getting Started

To use this API, you will need to run small local service which be responsible for managing your Blockchain.info wallet. Your application interacts with this service locally via HTTP API calls.

Start by completing the following steps:

Follow the installation instructions
Start the server: $ blockchain-wallet-service start --port 3000
Reference the documentation and start interacting with your wallet programmatically!

Note that blockchain-wallet-service is designed to be run locally on the same machine as your application and therefore will only accept connections from localhost. If you modify this service to accept external connections, be sure to add the appropriate firewall rules to prevent unauthorized use.

An API code is required for wallet creation and higher request limits. For basic usage, no API code is required. Request an API code here.

Upgrading

If you already have an application that uses Blockchain.info's Wallet API, you will need to complete the steps in the Getting Started section above and then, in your application code, replace calls to blockchain.info/merchant/... with localhost:<port>/merchant/....

API Documentation

View the original documentation.

All endpoints present in the API documentation above are supported in Blockchain Wallet API V2. The differences between two are:

The "consolidate addresses" endpoint has been omitted

All endpoints can be called with GET or POST, and can only be accessed from localhost.

Creating a new Blockchain Wallet

Endpoint: /api/v2/create

Query Parameters:

password - main wallet password (required)
api_code - blockchain.info wallet api code (required)
priv - private key to import into wallet as first address (optional)
label - label to give to the first address generated in the wallet (optional)
email - email to associate with the newly created wallet (optional)

Sample Response:

{
  "guid": "05f290be-dbef-4636-a809-868893c51711",
  "address": "13R9dBgKwBP29JKo11zhfi74YuBsMxJ4qY",
  "label": "Main address"
}

Make Payment

Endpoint: /merchant/:guid/payment

Query Parameters:

to - bitcoin address to send to (required)
amount - amount in satoshi to send (required)
password - main wallet password (required)
second_password - second wallet password (required, only if second password is enabled)
api_code - blockchain.info wallet api code (optional)
from - bitcoin address or account index to send from (optional)
fee - specify transaction fee in satoshi
fee_per_byte - specify transaction fee-per-byte in satoshi

It is recommended that transaction fees are specified using the fee_per_byte parameter, which will compute your final fee based on the size of the transaction. You can also set a static fee using the fee parameter, but doing so may result in a low fee-per-byte, leading to longer confirmation times.

Sample Response:

{
  "to" : ["1A8JiWcwvpY7tAopUkSnGuEYHmzGYfZPiq"],
  "from": ["17p49XUC2fw4Fn53WjZqYAm4APKqhNPEkY"],
  "amounts": [200000],
  "fee": 1000,
  "txid": "f322d01ad784e5deeb25464a5781c3b20971c1863679ca506e702e3e33c18e9c",
  "success": true
}

Send to Many

Endpoint: /merchant/:guid/sendmany

Query Parameters:

recipients - a URI encoded JSON object, with bitcoin addresses as keys and the satoshi amounts as values (required, see example below)
password - main wallet password (required)
second_password - second wallet password (required, only if second password is enabled)
api_code - blockchain.info wallet api code (optional)
from - bitcoin address or account index to send from (optional)
fee - specify transaction fee in satoshi
fee_per_byte - specify transaction fee-per-byte in satoshi

It is recommended that transaction fees are specified using the fee_per_byte parameter, which will compute your final fee based on the size of the transaction. You can also set a static fee using the fee parameter, but doing so may result in a low fee-per-byte, leading to longer confirmation times.

URI Encoding a JSON object in JavaScript:

var myObject = { address1: 10000, address2: 50000 };
var myJSONString = JSON.stringify(myObject);
// `encodeURIComponent` is a global function
var myURIEncodedJSONString = encodeURIComponent(myJSONString);
// use `myURIEncodedJSONString` as the `recipients` parameter

Sample Response:

{
  "to" : ["1A8JiWcwvpY7tAopUkSnGuEYHmzGYfZPiq", "18fyqiZzndTxdVo7g9ouRogB4uFj86JJiy"],
  "from": ["17p49XUC2fw4Fn53WjZqYAm4APKqhNPEkY"],
  "amounts": [16000, 5400030],
  "fee": 2000,
  "txid": "f322d01ad784e5deeb25464a5781c3b20971c1863679ca506e702e3e33c18e9c",
  "success": true
}

Fetch Wallet Balance

Endpoint: /merchant/:guid/balance

Query Parameters:

password - main wallet password (required)
api_code - blockchain.info wallet api code (required)

Sample Response:

{ "balance": 10000 }

Enable HD Functionality

Endpoint: /merchant/:guid/enableHD

Query Parameters:

password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

This will upgrade a wallet to an HD (Hierarchical Deterministic) Wallet, which allows the use of accounts. See BIP32 for more information on HD wallets and accounts.

List Active HD Accounts

Endpoint: /merchant/:guid/accounts

Query Parameters:

password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

List HD xPubs

Endpoint: /merchant/:guid/accounts/xpubs

Query Parameters:

password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

Create New HD Account

Endpoint: /merchant/:guid/accounts/create

Query Parameters:

label - label to assign to the newly created account (optional)
password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

Get Single HD Account

Endpoint: /merchant/:guid/accounts/:xpub_or_index

Query Parameters:

password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

Get HD Account Receiving Address

Endpoint: /merchant/:guid/accounts/:xpub_or_index/receiveAddress

Query Parameters:

password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

Check HD Account Balance

Endpoint: /merchant/:guid/accounts/:xpub_or_index/balance

Query Parameters:

password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

Archive HD Account

Endpoint: /merchant/:guid/accounts/:xpub_or_index/archive

Query Parameters:

password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

Unarchive HD Account

Endpoint: /merchant/:guid/accounts/:xpub_or_index/unarchive

Query Parameters:

password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

List Addresses (deprecated, use the HD API instead)

Endpoint: /merchant/:guid/list

Query Parameters:

password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

Sample Response:

{
  "addresses": [
    {
        "balance": 79434360,
        "address": "1A8JiWcwvpY7tAopUkSnGuEYHmzGYfZPiq",
        "label": "My Wallet",
        "total_received": 453300048335
    },
    {
        "balance": 0,
        "address": "17p49XUC2fw4Fn53WjZqYAm4APKqhNPEkY",
        "total_received": 0
    }
  ]
}

Fetch Address Balance (deprecated, use the HD API instead)

Endpoint: /merchant/:guid/address_balance

Query Parameters:

address - address to fetch balance for (required)
password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

Note: unlike the hosted API, there is no option of a confirmations parameter for specifying minimum confirmations.

Sample Response:

{ "balance": 129043, "address": "19r7jAbPDtfTKQ9VJpvDzFFxCjUJFKesVZ", "total_received": 53645423 }

Generate Address (deprecated, use the HD API instead)

Endpoint: /merchant/:guid/new_address

Query Parameters:

password - main wallet password (required)
label - label to give to the address (optional)
api_code - blockchain.info wallet api code (optional)

Sample Response:

{ "address" : "18fyqiZzndTxdVo7g9ouRogB4uFj86JJiy" , "label":  "My New Address" }

Archive Address (deprecated, use the HD API instead)

Endpoint: /merchant/:guid/archive_address

Query Parameters:

address - address to archive (required)
password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

Sample Response:

{ "archived" : "18fyqiZzndTxdVo7g9ouRogB4uFj86JJiy" }

Unarchive Address (deprecated, use the HD API instead)

Endpoint: /merchant/:guid/unarchive_address

Query Parameters:

address - address to unarchive (required)
password - main wallet password (required)
api_code - blockchain.info wallet api code (optional)

Sample Response:

{ "active" : "18fyqiZzndTxdVo7g9ouRogB4uFj86JJiy" }

RPC

Bitcoind compatible RPC API. Full documentation available here.

Starting the RPC server:

$ blockchain-wallet-service start-rpc [options]

View additional options and instructions under Usage.

Differences from server API:

Option -rpcssl is not supported
Method listsinceblock is not supported
Param minConfimations is not supported for methods listreceivedbyaccount and listreceivedbyaddress
Param minimumConfirmations is not supported for method getbalance
Param confirmations is not supported for method listaccounts
Responses representing transactions have a different format

Installation

nodejs and npm are required to install and use this API service. Installation:

$ npm install -g blockchain-wallet-service

For the best stability and performance, make sure you are always using the latest version.

To check your version:

$ blockchain-wallet-service -V

To update to the latest version:

$ npm update -g blockchain-wallet-service

Requires:

node >= 6.0.0
npm >= 3.0.0

If you have issues with the installation process, see the troubleshooting section below.

Troubleshooting

Installation errors:

If you are getting EACCESS or permissions-related errors, it might be necessary to run the install as root, using the sudo command.
If you are getting errors concerning node-gyp or python, install with npm install --no-optional

Startup errors:

If startup fails with /usr/bin/env: node: No such file or directory, it's possible node is not installed, or was installed with a different name (Ubuntu, for example, installs node as nodejs). If node was installed with a different name, create a symlink to your node binary: sudo ln -s /usr/bin/nodejs /usr/bin/node, or install node through Node Version Manager.

Runtime errors:

If you are seeing a TypeError claiming that an object has no method 'compare', it is because you are on a version of Node older than 0.12, before the compare method was added to Buffers. Try upgrading to at least Node version 0.12.
If you are getting wallet decryption errors despite having correct credentials, then it's possible that you do not have Java installed, which is required by a dependency of the my-wallet-v3 module. Not having Java installed during the npm install process can result in the inability to decrypt wallets. Download the JDK from here for Mac or by running apt-get install default-jdk on debian-based linux systems.

Timeout Errors:

If you are getting a timeout response, additional authorization from your blockchain wallet may be required. This can occur when using an unrecognized browser or IP address. An email authorizing the API access attempt will be sent to the registered user that will require action in order to authorize future requests.

If this section did not help, please open a github issue or visit our support center.

Usage

After installing the service, the command blockchain-wallet-service will be available for use.

Options

-h, --help - output usage information
-V, --version - output the version number
-c, --cwd - use the current directory as the wallet service module (development only)

Commands

start

Usage: blockchain-wallet-service start [options]

This command will start the service, making Blockchain Wallet API V2 available on a specified port.

Command options:

-h, --help - output usage information
-p, --port - port number to run the server on (defaults to 3000)
-b, --bind - bind to a specific ip (defaults to 127.0.0.1, note that binding to an ip other than this can lead to security vulnerabilities)
--ssl-key - the path to your ssl key (optional)
--ssl-cert - the path to your ssl certificate (optional)

To open the service to all incoming connections, bind to 0.0.0.0.

start-rpc

Usage: blockchain-wallet-service start-rpc [options]

This command will start the JSON RPC server.

Options:

-k, --key - api code to use for server requests (required option)
-p, --rpcport - rpc server port (default: 8000)
-b, --bind - bind to a specific ip (defaults to 127.0.0.1, note that binding to an ip other than this can lead to security vulnerabilities)

Get an API code here.

Examples

To start the Wallet API service on port 3000:

$ blockchain-wallet-service start --port 3000

Development

Clone this repo
Run yarn --ignore-engines
Run yarn start
Dev server is now running on port 3000

If you are developing blockchain-wallet-client alongside this module, it is useful to create a symlink to my-wallet-v3:

$ ln -s ../path/to/my-wallet-v3 node_modules/blockchain-wallet-client

Testing

$ yarn test

Configuration

Optional parameters can be configured in a .env file:

PORT - port number for running dev server (default: 3000)
BIND - ip address to bind the service to (default: 127.0.0.1)

Deployment

If you want to use blockchain-wallet-service in your UNIX production server, you just have to run:

$ nohup blockchain-wallet-service start --port 3000 &

Files

README.md

Latest commit

History

README.md

File metadata and controls

Blockchain Wallet API V2

Contents

Getting Started

Upgrading

API Documentation

Creating a new Blockchain Wallet

Make Payment

Send to Many

Fetch Wallet Balance

Enable HD Functionality

List Active HD Accounts

List HD xPubs

Create New HD Account

Get Single HD Account

Get HD Account Receiving Address

Check HD Account Balance

Archive HD Account

Unarchive HD Account

List Addresses (deprecated, use the HD API instead)

Fetch Address Balance (deprecated, use the HD API instead)

Generate Address (deprecated, use the HD API instead)

Archive Address (deprecated, use the HD API instead)

Unarchive Address (deprecated, use the HD API instead)

RPC

Installation

Troubleshooting

Usage

Options

Commands

start

start-rpc

Examples

Development

Testing

Configuration

Deployment