Skip to content

Latest commit

 

History

History
116 lines (76 loc) · 3.53 KB

docker-setup.md

File metadata and controls

116 lines (76 loc) · 3.53 KB
Raw

Docker Setup for PictoPy Frontend

This guide provides instructions for building and running the PictoPy frontend using Docker.

Table of Contents

  1. Prerequisites
  2. Building the Docker Image
  3. Running the Container
  4. Accessing the GUI App
  5. Common Troubleshooting
  6. Notes on Cross-Platform Compatibility

Prerequisites

  • Docker installed on your system
  • For Windows: An X Server (e.g., VcXsrv or Xming)
  • For Linux : An X server also installed 
    sudo apt install x

Building the Docker Image

  1. Open a terminal and navigate to your project's root directory.

  2. Go to Frontend directory

    cd frontend

  3. Run the following command to build the Docker image, replacing <image_name> with your desired image name:

    docker build --build-arg TAURI_SIGNING_PRIVATE_KEY=<private_key> --build-arg TAURI_SIGNING_PRIVATE_KEY_PASSWORD=<password> -t <image_name> .

    Replace <private_key> and with your actual Tauri signing private key and password and <image_name> with the image name. If you are using the default key, you can use the following command:

    docker build --build-arg TAURI_SIGNING_PRIVATE_KEY=dW50cnVzdGVkIGNvbW1lbnQ6IHJzaWduIGVuY3J5cHRlZCBzZWNyZXQga2V5ClJXUlRZMEl5NlF2SjE3cWNXOVlQQ0JBTlNITEpOUVoyQ3ZuNTdOSkwyNE1NN2RmVWQ1a0FBQkFBQUFBQUFBQUFBQUlBQUFBQU9XOGpTSFNRd0Q4SjNSbm5Oc1E0OThIUGx6SS9lWXI3ZjJxN3BESEh1QTRiQXlkR2E5aG1oK1g0Tk5kcmFzc0IvZFZScEpubnptRkxlbDlUR2R1d1Y5OGRSYUVmUGoxNTFBcHpQZ1dSS2lHWklZVHNkV1Byd1VQSnZCdTZFWlVGOUFNVENBRlgweUU9Cg== --build-arg TAURI_SIGNING_PRIVATE_KEY_PASSWORD=pass -t <image_name> .

Running the Container

Linux

  1. Allow X11 forwarding:

    xhost +local:docker

  2. Run the container:

    docker run -it -p 1420:1420 -e DISPLAY=$DISPLAY -v /tmp/.X11-unix:/tmp/.X11-unix <image_name>

  3. Run the tauri application

    npm run tauri dev

Windows

  1. Start an X Server:

    • Launch VcXsrv or Xming.
    • Configure it to allow connections from any host.

  2. Find your host machine's IP address:

    • Open Command Prompt and run ipconfig.
    • Look for the IPv4 Address under your active network adapter.

  3. Run the container:

    docker run -it -p 1420:1420 -e DISPLAY=<HOST_IP>:0.0  <image-name>

Replace <HOST_IP> with your actual IP address.

  1. Run the tauri application 
    npm run tauri dev

Accessing the GUI App

If everything is configured correctly, the Tauri GUI app should display on your screen after running the container.

Common Troubleshooting

1. GUI Not Displaying (X Server Issues)

  • Windows:

    • Ensure the X server (VcXsrv or Xming) is running.
    • Check that it's configured to allow connections from any host.

  • Linux:

    • Verify X11 forwarding is allowed: xhost +local:docker

2. Network Issues

If the container can't connect to the X server:

  1. Check your firewall settings and ensure it's not blocking the connection.
  2. On Windows, try using the host's IP address instead of localhost.

By following this guide and keeping these notes in mind, you should be able to successfully set up and run the PictoPy frontend using Docker across different platforms. If you encounter any persistent issues, please refer to the project's issue tracker or seek assistance from the development team.