installation failed OpenSuse 15.6

[emirhurem]

Fill out information requested in this template, without doing so issue will be ignored & closed!

Have you tried?

• Searching through existing/closed issues to see if your bug has already been already submitted?
• If installation failed with auto-cpufreq-installer,have you tried installing auto-cpufreq using Snap package?
• Have you tried configuring auto-cpufreq?
• Have you tried suggestions in troubleshooting section?

Error output:

Welcome to auto-cpufreq tool installer.

Select a key [I]nstall/[R]emove or press ctrl+c to quit: i


────────────────────────────────────── Detected OpenSUSE distribution ──────────────────────────────────────


─────────────────────────────────────── Setting up Python environment ───────────────────────────────────────

Loading repository data...
Reading installed packages...
'python3-setuptools' is already installed.
No update candidate for 'python3-setuptools-44.1.1-150400.9.9.1.noarch'. The highest available version is already installed.
'dmidecode' is already installed.
No update candidate for 'dmidecode-3.6-150400.16.11.2.x86_64'. The highest available version is already installed.
'python3' is already installed.
No update candidate for 'python3-3.6.15-150300.10.65.2.x86_64'. The highest available version is already installed.
'gcc' is already installed.
No update candidate for 'gcc-7-3.9.1.x86_64'. The highest available version is already installed.
'gtk3' not found in package names. Trying capabilities.
'libgtk-3-0' providing 'gtk3' is already installed.
'python3-pip' is already installed.
No update candidate for 'python3-pip-20.0.2-150400.20.1.noarch'. The highest available version is already installed.
Resolving package dependencies...

The following 2 recommended packages were automatically selected:
  libpng16-compat-devel pcre2-doc

The following 98 NEW packages are going to be installed:
  at-spi2-core at-spi2-core-devel at-spi2-core-lang cairo-devel compositeproto-devel damageproto-devel
  dbus-1-devel fixesproto-devel fontconfig-devel freetype2-devel fribidi-devel gdk-pixbuf-devel
  gettext-its-gtk4 glib2-devel gobject-introspection gobject-introspection-devel graphite2-devel gtk3-devel
  harfbuzz-devel inputproto-devel kbproto-devel libblkid-devel libbrotli-devel libbz2-devel libdatrie-devel
  libepoxy-devel libexpat-devel libffi-devel libglvnd-devel libgthread-2_0-0 libharfbuzz-cairo0
  libharfbuzz-gobject0 libharfbuzz-icu0 libicu73_2-devel libjpeg62 libjpeg62-devel libmount-devel
  libpcre2-32-0 libpcre2-posix3 libpixman-1-0-devel libpng16-compat-devel libpng16-devel libselinux-devel
  libsepol-devel libstdc++6-devel-gcc7 libstdc++-devel libthai-devel libtiff-devel libX11-devel libXau-devel
  libxcb-devel libxcb-screensaver0 libxcb-xf86dri0 libxcb-xtest0 libxcb-xvmc0 libXcomposite-devel
  libXcursor-devel libXdamage-devel libXext-devel libXfixes-devel libXft-devel libXi-devel libXinerama-devel
  libxkbcommon-devel libXrandr-devel libXrender-devel libXtst-devel libzstd-devel Mesa-KHR-devel
  Mesa-libEGL-devel Mesa-libGL-devel pango-devel pcre2-devel pcre2-doc pcre2-tools pthread-stubs-devel
  python3-cairo python3-cairo-devel python3-devel python3-gobject-cairo python3-gobject-Gdk
  python-cairo-common-devel randrproto-devel recordproto-devel renderproto-devel typelib-1_0-Atk-1_0
  typelib-1_0-Atspi-2_0 typelib-1_0-GdkPixbuf-2_0 typelib-1_0-GdkPixdata-2_0 typelib-1_0-Gtk-3_0
  typelib-1_0-HarfBuzz-0_0 typelib-1_0-Pango-1_0 wayland-devel xextproto-devel xineramaproto-devel
  xproto-devel xz-devel zlib-devel

98 new packages to install.
Overall download size: 22.4 MiB. Already cached: 674.2 KiB. After the operation, additional 124.2 MiB will be
used.

Backend:  classic_rpmtrans
Continue? [y/n/v/...? shows all options] (y): y
Retrieving: Mesa-KHR-devel-23.3.4-150600.85.pm.3.x86_64 (Packman)                        (1/98), 177.2 KiB    
Retrieving: Mesa-KHR-devel-23.3.4-150600.85.pm.3.x86_64.rpm ...............................[done (20.0 KiB/s)]
Retrieving: at-spi2-core-2.50.0-150600.1.2.x86_64 (Main Repository)                      (2/98),  81.9 KiB    
Retrieving: at-spi2-core-2.50.0-150600.1.2.x86_64.rpm ..................................................[done]
Retrieving: compositeproto-devel-0.4.2-1.22.x86_64 (Main Repository)                     (3/98),  15.2 KiB    
Retrieving: compositeproto-devel-0.4.2-1.22.x86_64.rpm .................................................[done]
Retrieving: damageproto-devel-1.2.1-1.22.x86_64 (Main Repository)                        (4/98),  13.4 KiB    
Retrieving: damageproto-devel-1.2.1-1.22.x86_64.rpm ....................................................[done]
Retrieving: dbus-1-devel-1.12.2-150400.18.8.1.x86_64 (Main Repository)                   (5/98),  59.0 KiB    
Retrieving: dbus-1-devel-1.12.2-150400.18.8.1.x86_64.rpm ...............................................[done]
Retrieving: fribidi-devel-1.0.10-150400.3.3.1.x86_64 (Main Repository)                   (6/98),  94.7 KiB    
Retrieving: fribidi-devel-1.0.10-150400.3.3.1.x86_64.rpm ...............................................[done]
Retrieving: graphite2-devel-1.3.14-150600.1.5.x86_64 (Main Repository)                   (7/98),  25.7 KiB    
Retrieving: graphite2-devel-1.3.14-150600.1.5.x86_64.rpm ...............................................[done]
Retrieving: inputproto-devel-2.4-150500.1.1.x86_64 (Main Repository)                     (8/98),  24.0 KiB    
Retrieving: inputproto-devel-2.4-150500.1.1.x86_64.rpm ....................................[done (14.8 KiB/s)]
Retrieving: libbrotli-devel-1.0.7-3.3.1.x86_64 (Main Repository)                         (9/98),  32.7 KiB    
Retrieving: libbrotli-devel-1.0.7-3.3.1.x86_64.rpm .........................................................................................................................[done (14.9 KiB/s)]
Retrieving: libbz2-devel-1.0.8-150400.1.122.x86_64 (Main Repository)                                                                                                     (10/98),  18.7 KiB    
Retrieving: libbz2-devel-1.0.8-150400.1.122.x86_64.rpm ..................................................................................................................................[done]
Retrieving: libdatrie-devel-0.2.9-1.25.x86_64 (Main Repository)                                                                                                          (11/98), 110.2 KiB    
Retrieving: libdatrie-devel-0.2.9-1.25.x86_64.rpm .......................................................................................................................................[done]
Retrieving: libexpat-devel-2.4.4-150400.3.17.1.x86_64 (Main Repository)                                                                                                  (12/98),  48.9 KiB    
Retrieving: libexpat-devel-2.4.4-150400.3.17.1.x86_64.rpm ..................................................................................................................[done (14.8 KiB/s)]
Retrieving: libffi-devel-3.2.1.git259-10.8.x86_64 (Main Repository)                                                                                                      (13/98),  26.7 KiB    
Retrieving: libffi-devel-3.2.1.git259-10.8.x86_64.rpm ...................................................................................................................................[done]
Retrieving: libglvnd-devel-1.7.0-150600.1.2.x86_64 (Main Repository)                                                                                                     (14/98),  33.1 KiB    
Retrieving: libglvnd-devel-1.7.0-150600.1.2.x86_64.rpm ..................................................................................................................................[done]
Retrieving: libharfbuzz-cairo0-8.3.0-150600.1.3.x86_64 (Main Repository)                                                                                                 (15/98),  91.9 KiB    
Retrieving: libharfbuzz-cairo0-8.3.0-150600.1.3.x86_64.rpm .................................................................................................................[done (14.8 KiB/s)]
In cache libharfbuzz-gobject0-8.3.0-150600.1.3.x86_64.rpm                                                                                                                (16/98),  76.1 KiB    
Retrieving: libharfbuzz-icu0-8.3.0-150600.1.3.x86_64 (Main Repository)                                                                                                   (17/98),  59.5 KiB    
Retrieving: libharfbuzz-icu0-8.3.0-150600.1.3.x86_64.rpm ...................................................................................................................[done (12.1 KiB/s)]
Retrieving: libicu73_2-devel-73.2-150000.1.7.1.x86_64 (Main Repository)                                                                                                  (18/98), 702.5 KiB    
Retrieving: libicu73_2-devel-73.2-150000.1.7.1.x86_64.rpm ...................................................................................................................[done (1.3 MiB/s)]
Retrieving: libjpeg62-62.3.0-150600.22.3.x86_64 (Main Repository)                                                                                                        (19/98), 180.4 KiB    
Retrieving: libjpeg62-62.3.0-150600.22.3.x86_64.rpm .....................................................................................................................................[done]
Retrieving: libpcre2-32-0-10.42-150600.1.26.x86_64 (Main Repository)                                                                                                     (20/98), 269.6 KiB    
Retrieving: libpcre2-32-0-10.42-150600.1.26.x86_64.rpm ......................................................................................................................[done (2.8 KiB/s)]
Retrieving: libpcre2-posix3-10.42-150600.1.26.x86_64 (Main Repository)                                                                                                   (21/98),  30.1 KiB    
Retrieving: libpcre2-posix3-10.42-150600.1.26.x86_64.rpm ................................................................................................................................[done]
Retrieving: libsepol-devel-3.5-150600.1.49.x86_64 (Main Repository)                                                                                                      (22/98),  46.5 KiB    
Retrieving: libsepol-devel-3.5-150600.1.49.x86_64.rpm ...................................................................................................................................[done]
Retrieving: libstdc++6-devel-gcc7-7.5.0+r278197-150000.4.41.1.x86_64 (Main Repository)                                                                                   (23/98),   6.7 MiB    
Retrieving: libstdc++6-devel-gcc7-7.5.0+r278197-150000.4.41.1.x86_64.rpm ...................................................................................................[done (33.9 MiB/s)]
Retrieving: libzstd-devel-1.5.5-150600.1.3.x86_64 (Main Repository)                                                                                                      (24/98),  72.0 KiB    
Retrieving: libzstd-devel-1.5.5-150600.1.3.x86_64.rpm ...................................................................................................................................[done]
Retrieving: pcre2-doc-10.42-150600.1.26.noarch (Main Repository)                                                                                                         (25/98), 353.5 KiB    
Retrieving: pcre2-doc-10.42-150600.1.26.noarch.rpm ......................................................................................................................................[done]
Retrieving: pthread-stubs-devel-0.4-1.25.x86_64 (Main Repository)                                                                                                        (26/98),   9.0 KiB    
Retrieving: pthread-stubs-devel-0.4-1.25.x86_64.rpm .....................................................................................................................................[done]
Retrieving: python3-cairo-1.15.1-150000.3.8.1.x86_64 (Main Repository)                                                                                                   (27/98),  77.2 KiB    
Retrieving: python3-cairo-1.15.1-150000.3.8.1.x86_64.rpm ...................................................................................................................[done (13.4 KiB/s)]
Retrieving: recordproto-devel-1.14.2-1.22.x86_64 (Main Repository)                                                                                                       (28/98),  22.2 KiB    
Retrieving: recordproto-devel-1.14.2-1.22.x86_64.rpm ....................................................................................................................................[done]
Retrieving: renderproto-devel-0.11.1-1.22.x86_64 (Main Repository)                                                                                                       (29/98),  22.9 KiB    
Retrieving: renderproto-devel-0.11.1-1.22.x86_64.rpm ....................................................................................................................................[done]
In cache typelib-1_0-Atk-1_0-2.50.0-150600.1.2.x86_64.rpm                                                                                                                (30/98),  47.4 KiB    
Retrieving: typelib-1_0-Atspi-2_0-2.50.0-150600.1.2.x86_64 (Main Repository)                                                                                             (31/98),  44.7 KiB    
Retrieving: typelib-1_0-Atspi-2_0-2.50.0-150600.1.2.x86_64.rpm ..........................................................................................................................[done]
Retrieving: xextproto-devel-7.3.0-1.22.x86_64 (Main Repository)                                                                                                          (32/98), 114.5 KiB    
Retrieving: xextproto-devel-7.3.0-1.22.x86_64.rpm ...........................................................................................................................[done (2.8 KiB/s)]
Retrieving: xineramaproto-devel-1.2.1-2.22.x86_64 (Main Repository)                                                                                                      (33/98),  10.3 KiB    
Retrieving: xineramaproto-devel-1.2.1-2.22.x86_64.rpm .......................................................................................................................[done (2.4 KiB/s)]
Retrieving: xproto-devel-7.0.31-1.22.x86_64 (Main Repository)                                                                                                            (34/98), 156.1 KiB    
Retrieving: xproto-devel-7.0.31-1.22.x86_64.rpm .............................................................................................................................[done (2.7 KiB/s)]
Retrieving: xz-devel-5.4.1-150600.1.2.x86_64 (Main Repository)                                                                                                           (35/98),  74.5 KiB    
Retrieving: xz-devel-5.4.1-150600.1.2.x86_64.rpm ........................................................................................................................................[done]
Retrieving: zlib-devel-1.2.13-150500.4.3.1.x86_64 (Main Repository)                                                                                                      (36/98), 121.3 KiB    
Retrieving: zlib-devel-1.2.13-150500.4.3.1.x86_64.rpm .......................................................................................................................[done (2.8 KiB/s)]
Retrieving: at-spi2-core-lang-2.50.0-150600.1.2.noarch (Main Repository)                                                                                                 (37/98), 161.6 KiB    
Retrieving: at-spi2-core-lang-2.50.0-150600.1.2.noarch.rpm ..................................................................................................................[done (2.9 KiB/s)]
Retrieving: libthai-devel-0.1.29-150400.1.4.x86_64 (Main Repository)                                                                                                     (38/98),  20.2 KiB    
Retrieving: libthai-devel-0.1.29-150400.1.4.x86_64.rpm ..................................................................................................................................[done]
Retrieving: wayland-devel-1.22.0-150600.1.6.x86_64 (Main Repository)                                                                                                     (39/98), 104.5 KiB    
Retrieving: wayland-devel-1.22.0-150600.1.6.x86_64.rpm ......................................................................................................................[done (2.8 KiB/s)]
In cache typelib-1_0-HarfBuzz-0_0-8.3.0-150600.1.3.x86_64.rpm                                                                                                            (40/98),  85.5 KiB    
Retrieving: libjpeg62-devel-62.3.0-150600.22.3.x86_64 (Main Repository)                                                                                                  (41/98), 121.1 KiB    
Retrieving: libjpeg62-devel-62.3.0-150600.22.3.x86_64.rpm ...................................................................................................................[done (2.9 KiB/s)]
Retrieving: libstdc++-devel-7-3.9.1.x86_64 (Main Repository)                                                                                                             (42/98),   8.6 KiB    
Retrieving: libstdc++-devel-7-3.9.1.x86_64.rpm ..........................................................................................................................................[done]
Retrieving: pcre2-tools-10.42-150600.1.26.x86_64 (Main Repository)                                                                                                       (43/98), 173.5 KiB    
Retrieving: pcre2-tools-10.42-150600.1.26.x86_64.rpm ........................................................................................................................[done (2.8 KiB/s)]
Retrieving: python3-gobject-cairo-3.42.2-150400.10.23.x86_64 (Main Repository)                                                                                           (44/98),  37.3 KiB    
Retrieving: python3-gobject-cairo-3.42.2-150400.10.23.x86_64.rpm ........................................................................................................................[done]
Retrieving: fixesproto-devel-6.0-150400.1.4.x86_64 (Main Repository)                                                                                                     (45/98),  19.2 KiB    
Retrieving: fixesproto-devel-6.0-150400.1.4.x86_64.rpm ..................................................................................................................................[done]
Retrieving: randrproto-devel-1.6.0-4.17.x86_64 (Main Repository)                                                                                                         (46/98),  37.6 KiB    
Retrieving: randrproto-devel-1.6.0-4.17.x86_64.rpm ......................................................................................................................................[done]
Retrieving: libXau-devel-1.0.8-1.26.x86_64 (Main Repository)                                                                                                             (47/98),  15.0 KiB    
Retrieving: libXau-devel-1.0.8-1.26.x86_64.rpm ..........................................................................................................................................[done]
Retrieving: kbproto-devel-1.0.7-150600.16.2.x86_64 (Main Repository)                                                                                                     (48/98), 134.9 KiB    
Retrieving: kbproto-devel-1.0.7-150600.16.2.x86_64.rpm ......................................................................................................................[done (2.8 KiB/s)]
Retrieving: libpng16-devel-1.6.40-150600.1.3.x86_64 (Main Repository)                                                                                                    (49/98), 198.4 KiB    
Retrieving: libpng16-devel-1.6.40-150600.1.3.x86_64.rpm .....................................................................................................................[done (2.8 KiB/s)]
Retrieving: libpng16-compat-devel-1.6.40-150600.1.3.x86_64 (Main Repository)                                                                                             (50/98), 106.5 KiB    
Retrieving: libpng16-compat-devel-1.6.40-150600.1.3.x86_64.rpm ..............................................................................................................[done (2.9 KiB/s)]
Retrieving: freetype2-devel-2.10.4-150000.4.15.1.x86_64 (Main Repository)                                                                                                (51/98), 942.1 KiB    
Retrieving: freetype2-devel-2.10.4-150000.4.15.1.x86_64.rpm .................................................................................................................[done (3.2 KiB/s)]
In cache typelib-1_0-Pango-1_0-1.51.1-150600.1.3.x86_64.rpm                                                                                                              (52/98),  54.8 KiB    
Retrieving: pcre2-devel-10.42-150600.1.26.x86_64 (Main Repository)                                                                                                       (53/98), 275.7 KiB    
Retrieving: pcre2-devel-10.42-150600.1.26.x86_64.rpm ....................................................................................................................................[done]
Retrieving: gobject-introspection-1.78.1-150600.2.3.x86_64 (Main Repository)                                                                                             (54/98),   1.2 MiB    
Retrieving: gobject-introspection-1.78.1-150600.2.3.x86_64.rpm ..............................................................................................................[done (3.8 MiB/s)]
Retrieving: fontconfig-devel-2.14.2-150600.1.3.x86_64 (Main Repository)                                                                                                  (55/98),  23.0 KiB    
Retrieving: fontconfig-devel-2.14.2-150600.1.3.x86_64.rpm ..................................................................................................................[done (23.0 KiB/s)]
Retrieving: libselinux-devel-3.5-150600.1.46.x86_64 (Main Repository)                                                                                                    (56/98), 120.2 KiB    
Retrieving: libselinux-devel-3.5-150600.1.46.x86_64.rpm ....................................[done (2.8 KiB/s)]
Retrieving: gettext-its-gtk4-4.12.4-150600.3.3.1.x86_64 (Update repository with updates from SUSE Linux
Enterprise 15)
                                                                                        (57/98),  96.9 KiB    
Retrieving: gettext-its-gtk4-4.12.4-150600.3.3.1.x86_64.rpm ............................................[done]
Retrieving: libblkid-devel-2.39.3-150600.4.9.4.x86_64 (Update repository with updates from SUSE Linux
Enterprise 15)
                                                                                        (58/98),  68.9 KiB    
Retrieving: libblkid-devel-2.39.3-150600.4.9.4.x86_64.rpm ..............................................[done]
Retrieving: libgthread-2_0-0-2.78.6-150600.4.3.1.x86_64 (Update repository with updates from SUSE Linux
Enterprise 15)
                                                                                        (59/98), 144.5 KiB    
Retrieving: libgthread-2_0-0-2.78.6-150600.4.3.1.x86_64.rpm ..............................[done (157.8 KiB/s)]
Retrieving: libpixman-1-0-devel-0.43.4-150600.3.3.1.x86_64 (Update repository with updates from SUSE Linux
Enterprise 15)
                                                                                        (60/98),  20.1 KiB    
Retrieving: libpixman-1-0-devel-0.43.4-150600.3.3.1.x86_64.rpm .........................................[done]
Retrieving: libxcb-screensaver0-1.13-150000.3.11.1.x86_64 (Update repository with updates from SUSE Linux
Enterprise 15)
                                                                                        (61/98),  13.7 KiB    
Retrieving: libxcb-screensaver0-1.13-150000.3.11.1.x86_64.rpm ..........................................[done]
Retrieving: libxcb-xf86dri0-1.13-150000.3.11.1.x86_64 (Update repository with updates from SUSE Linux
Enterprise 15)
                                                                                        (62/98),  13.6 KiB    
Retrieving: libxcb-xf86dri0-1.13-150000.3.11.1.x86_64.rpm ..............................................[done]
Retrieving: libxcb-xtest0-1.13-150000.3.11.1.x86_64 (Update repository with updates from SUSE Linux Enterprise
15)
                                                                                        (63/98),  12.3 KiB    
Retrieving: libxcb-xtest0-1.13-150000.3.11.1.x86_64.rpm ................................................[done]
Retrieving: libxcb-xvmc0-1.13-150000.3.11.1.x86_64 (Update repository with updates from SUSE Linux Enterprise
15)
                                                                                        (64/98),  13.6 KiB    
Retrieving: libxcb-xvmc0-1.13-150000.3.11.1.x86_64.rpm .................................................[done]
Retrieving: libxkbcommon-devel-1.5.0-150600.3.3.1.x86_64 (Update repository with updates from SUSE Linux
Enterprise 15)
                                                                                        (65/98),  77.3 KiB    
Retrieving: libxkbcommon-devel-1.5.0-150600.3.3.1.x86_64.rpm ...........................................[done]
Retrieving: python3-devel-3.6.15-150300.10.65.1.x86_64 (Update repository with updates from SUSE Linux
Enterprise 15)
                                                                                        (66/98), 235.9 KiB    
Retrieving: python3-devel-3.6.15-150300.10.65.1.x86_64.rpm .................................[done (2.7 KiB/s)]
In cache typelib-1_0-GdkPixbuf-2_0-2.42.12-150600.3.3.1.x86_64.rpm                      (67/98),  36.5 KiB    
Retrieving: libtiff-devel-4.6.0-150600.3.3.1.x86_64 (Update repository with updates from SUSE Linux Enterprise
15)
                                                                                        (68/98), 194.8 KiB    
Retrieving: libtiff-devel-4.6.0-150600.3.3.1.x86_64.rpm ....................................[done (2.7 KiB/s)]
Retrieving: libmount-devel-2.39.3-150600.4.9.4.x86_64 (Update repository with updates from SUSE Linux
Enterprise 15)
                                                                                        (69/98),  69.8 KiB    
Retrieving: libmount-devel-2.39.3-150600.4.9.4.x86_64.rpm ..............................................[done]
Retrieving: libxcb-devel-1.13-150000.3.11.1.x86_64 (Update repository with updates from SUSE Linux Enterprise
15)
                                                                                        (70/98), 170.2 KiB    
Retrieving: libxcb-devel-1.13-150000.3.11.1.x86_64.rpm .....................................[done (2.7 KiB/s)]
Retrieving: typelib-1_0-GdkPixdata-2_0-2.42.12-150600.3.3.1.x86_64 (Update repository with updates from SUSE
Linux Enterprise 15)
                                                                                        (71/98),  32.4 KiB    
Retrieving: typelib-1_0-GdkPixdata-2_0-2.42.12-150600.3.3.1.x86_64.rpm .................................[done]
Retrieving: glib2-devel-2.78.6-150600.4.3.1.x86_64 (Update repository with updates from SUSE Linux Enterprise
15)
                                                                                        (72/98), 584.8 KiB    
Retrieving: glib2-devel-2.78.6-150600.4.3.1.x86_64.rpm .....................................[done (2.9 KiB/s)]
Retrieving: gdk-pixbuf-devel-2.42.12-150600.3.3.1.x86_64 (Update repository with updates from SUSE Linux
Enterprise 15)
                                                                                        (73/98),  85.7 KiB    
Retrieving: gdk-pixbuf-devel-2.42.12-150600.3.3.1.x86_64.rpm ...............................[done (2.4 KiB/s)]
In cache python3-gobject-Gdk-3.42.2-150400.10.23.x86_64.rpm                             (74/98),  72.9 KiB    
Retrieving: libX11-devel-1.8.7-150600.1.2.x86_64 (Main Repository)                      (75/98),   1.4 MiB    
Retrieving: libX11-devel-1.8.7-150600.1.2.x86_64.rpm .......................................[done (4.1 MiB/s)]
Retrieving: gobject-introspection-devel-1.78.1-150600.2.3.x86_64 (Main Repository)      (76/98), 119.9 KiB    
Retrieving: gobject-introspection-devel-1.78.1-150600.2.3.x86_64.rpm .......................[done (3.0 KiB/s)]
Retrieving: libXrender-devel-0.9.10-1.30.x86_64 (Main Repository)                       (77/98),  17.1 KiB    
Retrieving: libXrender-devel-0.9.10-1.30.x86_64.rpm .......................................[done (13.4 KiB/s)]
Retrieving: libXfixes-devel-6.0.0-150400.1.4.x86_64 (Main Repository)                   (78/98),  14.1 KiB    
Retrieving: libXfixes-devel-6.0.0-150400.1.4.x86_64.rpm ................................................[done]
Retrieving: libXext-devel-1.3.3-1.30.x86_64 (Main Repository)                           (79/98),  96.9 KiB    
Retrieving: libXext-devel-1.3.3-1.30.x86_64.rpm ........................................................[done]
Retrieving: libXft-devel-2.3.2-1.33.x86_64 (Main Repository)                            (80/98),  19.2 KiB    
Retrieving: libXft-devel-2.3.2-1.33.x86_64.rpm .........................................................[done]
Retrieving: libXdamage-devel-1.1.4-1.23.x86_64 (Main Repository)                        (81/98),   9.8 KiB    
Retrieving: libXdamage-devel-1.1.4-1.23.x86_64.rpm .....................................................[done]
Retrieving: libXcursor-devel-1.1.15-1.18.x86_64 (Main Repository)                       (82/98),  22.9 KiB    
Retrieving: libXcursor-devel-1.1.15-1.18.x86_64.rpm ....................................................[done]
Retrieving: libXcomposite-devel-0.4.4-1.23.x86_64 (Main Repository)                     (83/98),  16.6 KiB    
Retrieving: libXcomposite-devel-0.4.4-1.23.x86_64.rpm ..................................................[done]
Retrieving: libXrandr-devel-1.5.1-2.17.x86_64 (Main Repository)                         (84/98),  20.8 KiB    
Retrieving: libXrandr-devel-1.5.1-2.17.x86_64.rpm ......................................................[done]
Retrieving: libXinerama-devel-1.1.3-1.22.x86_64 (Main Repository)                       (85/98),  13.3 KiB    
Retrieving: libXinerama-devel-1.1.3-1.22.x86_64.rpm ....................................................[done]
Retrieving: libXi-devel-1.7.9-3.2.1.x86_64 (Main Repository)                            (86/98), 137.3 KiB    
Retrieving: libXi-devel-1.7.9-3.2.1.x86_64.rpm .............................................[done (2.7 KiB/s)]
Retrieving: cairo-devel-1.18.0-150600.1.3.x86_64 (Main Repository)                      (87/98), 300.6 KiB    
Retrieving: cairo-devel-1.18.0-150600.1.3.x86_64.rpm .......................................[done (2.8 KiB/s)]
Retrieving: libXtst-devel-1.2.3-1.24.x86_64 (Main Repository)                           (88/98),  28.5 KiB    
Retrieving: libXtst-devel-1.2.3-1.24.x86_64.rpm ........................................................[done]
Retrieving: python-cairo-common-devel-1.15.1-150000.3.8.1.x86_64 (Main Repository)      (89/98),  13.6 KiB    
Retrieving: python-cairo-common-devel-1.15.1-150000.3.8.1.x86_64.rpm ...................................[done]
Retrieving: harfbuzz-devel-8.3.0-150600.1.3.x86_64 (Main Repository)                    (90/98), 199.8 KiB    
Retrieving: harfbuzz-devel-8.3.0-150600.1.3.x86_64.rpm .................................................[done]
Retrieving: at-spi2-core-devel-2.50.0-150600.1.2.x86_64 (Main Repository)               (91/98),   1.6 MiB    
Retrieving: at-spi2-core-devel-2.50.0-150600.1.2.x86_64.rpm ................................[done (6.9 MiB/s)]
Retrieving: python3-cairo-devel-1.15.1-150000.3.8.1.x86_64 (Main Repository)            (92/98),  11.4 KiB    
Retrieving: python3-cairo-devel-1.15.1-150000.3.8.1.x86_64.rpm .........................................[done]
Retrieving: pango-devel-1.51.1-150600.1.3.x86_64 (Main Repository)                      (93/98), 180.1 KiB    
Retrieving: pango-devel-1.51.1-150600.1.3.x86_64.rpm ...................................................[done]
In cache typelib-1_0-Gtk-3_0-3.24.38+111-150600.3.3.1.x86_64.rpm                        (94/98), 300.9 KiB    
Retrieving: Mesa-libGL-devel-23.3.4-150600.85.pm.3.x86_64 (Packman)                     (95/98), 617.7 KiB    
Retrieving: Mesa-libGL-devel-23.3.4-150600.85.pm.3.x86_64.rpm ..........................................[done]
Retrieving: Mesa-libEGL-devel-23.3.4-150600.85.pm.3.x86_64 (Packman)                    (96/98), 193.0 KiB    
Retrieving: Mesa-libEGL-devel-23.3.4-150600.85.pm.3.x86_64.rpm ............................[done (88.0 KiB/s)]
Retrieving: libepoxy-devel-1.5.10-150500.1.2.x86_64 (Main Repository)                   (97/98), 143.6 KiB    
Retrieving: libepoxy-devel-1.5.10-150500.1.2.x86_64.rpm ....................................[done (2.8 KiB/s)]
Retrieving: gtk3-devel-3.24.38+111-150600.3.3.1.x86_64 (Update repository with updates from SUSE Linux
Enterprise 15)
                                                                                        (98/98),   2.0 MiB    
Retrieving: gtk3-devel-3.24.38+111-150600.3.3.1.x86_64.rpm .................................[done (5.9 MiB/s)]

Checking for file conflicts: ...........................................................................[done]
( 1/98) Installing: Mesa-KHR-devel-23.3.4-150600.85.pm.3.x86_64 ........................................[done]
( 2/98) Installing: at-spi2-core-2.50.0-150600.1.2.x86_64 ..............................................[done]
( 3/98) Installing: compositeproto-devel-0.4.2-1.22.x86_64 .............................................[done]
( 4/98) Installing: damageproto-devel-1.2.1-1.22.x86_64 ................................................[done]
( 5/98) Installing: dbus-1-devel-1.12.2-150400.18.8.1.x86_64 ...........................................[done]
( 6/98) Installing: fribidi-devel-1.0.10-150400.3.3.1.x86_64 ...........................................[done]
( 7/98) Installing: graphite2-devel-1.3.14-150600.1.5.x86_64 ...........................................[done]
( 8/98) Installing: inputproto-devel-2.4-150500.1.1.x86_64 .............................................[done]
( 9/98) Installing: libbrotli-devel-1.0.7-3.3.1.x86_64 .................................................[done]
(10/98) Installing: libbz2-devel-1.0.8-150400.1.122.x86_64 .............................................[done]
(11/98) Installing: libdatrie-devel-0.2.9-1.25.x86_64 ..................................................[done]
(12/98) Installing: libexpat-devel-2.4.4-150400.3.17.1.x86_64 ..........................................[done]
(13/98) Installing: libffi-devel-3.2.1.git259-10.8.x86_64 ..............................................[done]
(14/98) Installing: libglvnd-devel-1.7.0-150600.1.2.x86_64 .............................................[done]
(15/98) Installing: libharfbuzz-cairo0-8.3.0-150600.1.3.x86_64 .........................................[done]
(16/98) Installing: libharfbuzz-gobject0-8.3.0-150600.1.3.x86_64 .......................................[done]
(17/98) Installing: libharfbuzz-icu0-8.3.0-150600.1.3.x86_64 ...........................................[done]
(18/98) Installing: libicu73_2-devel-73.2-150000.1.7.1.x86_64 ..........................................[done]
(19/98) Installing: libjpeg62-62.3.0-150600.22.3.x86_64 ................................................[done]
(20/98) Installing: libpcre2-32-0-10.42-150600.1.26.x86_64 .............................................[done]
(21/98) Installing: libpcre2-posix3-10.42-150600.1.26.x86_64 ...........................................[done]
(22/98) Installing: libsepol-devel-3.5-150600.1.49.x86_64 ..............................................[done]
(23/98) Installing: libstdc++6-devel-gcc7-7.5.0+r278197-150000.4.41.1.x86_64 ...........................[done]
(24/98) Installing: libzstd-devel-1.5.5-150600.1.3.x86_64 ..............................................[done]
(25/98) Installing: pcre2-doc-10.42-150600.1.26.noarch .................................................[done]
(26/98) Installing: pthread-stubs-devel-0.4-1.25.x86_64 ................................................[done]
(27/98) Installing: python3-cairo-1.15.1-150000.3.8.1.x86_64 ...........................................[done]
(28/98) Installing: recordproto-devel-1.14.2-1.22.x86_64 ...............................................[done]
(29/98) Installing: renderproto-devel-0.11.1-1.22.x86_64 ...............................................[done]
(30/98) Installing: typelib-1_0-Atk-1_0-2.50.0-150600.1.2.x86_64 .......................................[done]
(31/98) Installing: typelib-1_0-Atspi-2_0-2.50.0-150600.1.2.x86_64 .....................................[done]
(32/98) Installing: xextproto-devel-7.3.0-1.22.x86_64 ..................................................[done]
(33/98) Installing: xineramaproto-devel-1.2.1-2.22.x86_64 ..............................................[done]
(34/98) Installing: xproto-devel-7.0.31-1.22.x86_64 ....................................................[done]
(35/98) Installing: xz-devel-5.4.1-150600.1.2.x86_64 ...................................................[done]
(36/98) Installing: zlib-devel-1.2.13-150500.4.3.1.x86_64 ..............................................[done]
(37/98) Installing: at-spi2-core-lang-2.50.0-150600.1.2.noarch .........................................[done]
(38/98) Installing: libthai-devel-0.1.29-150400.1.4.x86_64 .............................................[done]
(39/98) Installing: wayland-devel-1.22.0-150600.1.6.x86_64 .............................................[done]
(40/98) Installing: typelib-1_0-HarfBuzz-0_0-8.3.0-150600.1.3.x86_64 ...................................[done]
(41/98) Installing: libjpeg62-devel-62.3.0-150600.22.3.x86_64 ..........................................[done]
(42/98) Installing: libstdc++-devel-7-3.9.1.x86_64 .....................................................[done]
(43/98) Installing: pcre2-tools-10.42-150600.1.26.x86_64 ...............................................[done]
(44/98) Installing: python3-gobject-cairo-3.42.2-150400.10.23.x86_64 ...................................[done]
(45/98) Installing: fixesproto-devel-6.0-150400.1.4.x86_64 .............................................[done]
(46/98) Installing: randrproto-devel-1.6.0-4.17.x86_64 .................................................[done]
(47/98) Installing: libXau-devel-1.0.8-1.26.x86_64 .....................................................[done]
(48/98) Installing: kbproto-devel-1.0.7-150600.16.2.x86_64 .............................................[done]
(49/98) Installing: libpng16-devel-1.6.40-150600.1.3.x86_64 ............................................[done]
(50/98) Installing: libpng16-compat-devel-1.6.40-150600.1.3.x86_64 .....................................[done]
(51/98) Installing: freetype2-devel-2.10.4-150000.4.15.1.x86_64 ........................................[done]
(52/98) Installing: typelib-1_0-Pango-1_0-1.51.1-150600.1.3.x86_64 .....................................[done]
(53/98) Installing: pcre2-devel-10.42-150600.1.26.x86_64 ...............................................[done]
(54/98) Installing: gobject-introspection-1.78.1-150600.2.3.x86_64 .....................................[done]
(55/98) Installing: fontconfig-devel-2.14.2-150600.1.3.x86_64 ..........................................[done]
(56/98) Installing: libselinux-devel-3.5-150600.1.46.x86_64 ............................................[done]
(57/98) Installing: gettext-its-gtk4-4.12.4-150600.3.3.1.x86_64 ........................................[done]
(58/98) Installing: libblkid-devel-2.39.3-150600.4.9.4.x86_64 ..........................................[done]
(59/98) Installing: libgthread-2_0-0-2.78.6-150600.4.3.1.x86_64 ........................................[done]
(60/98) Installing: libpixman-1-0-devel-0.43.4-150600.3.3.1.x86_64 .....................................[done]
(61/98) Installing: libxcb-screensaver0-1.13-150000.3.11.1.x86_64 ......................................[done]
(62/98) Installing: libxcb-xf86dri0-1.13-150000.3.11.1.x86_64 ..........................................[done]
(63/98) Installing: libxcb-xtest0-1.13-150000.3.11.1.x86_64 ............................................[done]
(64/98) Installing: libxcb-xvmc0-1.13-150000.3.11.1.x86_64 .............................................[done]
(65/98) Installing: libxkbcommon-devel-1.5.0-150600.3.3.1.x86_64 .......................................[done]
(66/98) Installing: python3-devel-3.6.15-150300.10.65.1.x86_64 .........................................[done]
(67/98) Installing: typelib-1_0-GdkPixbuf-2_0-2.42.12-150600.3.3.1.x86_64 ..............................[done]
(68/98) Installing: libtiff-devel-4.6.0-150600.3.3.1.x86_64 ............................................[done]
(69/98) Installing: libmount-devel-2.39.3-150600.4.9.4.x86_64 ..........................................[done]
(70/98) Installing: libxcb-devel-1.13-150000.3.11.1.x86_64 .............................................[done]
(71/98) Installing: typelib-1_0-GdkPixdata-2_0-2.42.12-150600.3.3.1.x86_64 .............................[done]
(72/98) Installing: glib2-devel-2.78.6-150600.4.3.1.x86_64 .............................................[done]
(73/98) Installing: gdk-pixbuf-devel-2.42.12-150600.3.3.1.x86_64 .......................................[done]
(74/98) Installing: python3-gobject-Gdk-3.42.2-150400.10.23.x86_64 .....................................[done]
(75/98) Installing: libX11-devel-1.8.7-150600.1.2.x86_64 ...............................................[done]
(76/98) Installing: gobject-introspection-devel-1.78.1-150600.2.3.x86_64 ...............................[done]
(77/98) Installing: libXrender-devel-0.9.10-1.30.x86_64 ................................................[done]
(78/98) Installing: libXfixes-devel-6.0.0-150400.1.4.x86_64 ............................................[done]
(79/98) Installing: libXext-devel-1.3.3-1.30.x86_64 ....................................................[done]
(80/98) Installing: libXft-devel-2.3.2-1.33.x86_64 .....................................................[done]
(81/98) Installing: libXdamage-devel-1.1.4-1.23.x86_64 .................................................[done]
(82/98) Installing: libXcursor-devel-1.1.15-1.18.x86_64 ................................................[done]
(83/98) Installing: libXcomposite-devel-0.4.4-1.23.x86_64 ..............................................[done]
(84/98) Installing: libXrandr-devel-1.5.1-2.17.x86_64 ..................................................[done]
(85/98) Installing: libXinerama-devel-1.1.3-1.22.x86_64 ................................................[done]
(86/98) Installing: libXi-devel-1.7.9-3.2.1.x86_64 .....................................................[done]
(87/98) Installing: cairo-devel-1.18.0-150600.1.3.x86_64 ...............................................[done]
(88/98) Installing: libXtst-devel-1.2.3-1.24.x86_64 ....................................................[done]
(89/98) Installing: python-cairo-common-devel-1.15.1-150000.3.8.1.x86_64 ...............................[done]
(90/98) Installing: harfbuzz-devel-8.3.0-150600.1.3.x86_64 .............................................[done]
(91/98) Installing: at-spi2-core-devel-2.50.0-150600.1.2.x86_64 ........................................[done]
(92/98) Installing: python3-cairo-devel-1.15.1-150000.3.8.1.x86_64 .....................................[done]
(93/98) Installing: pango-devel-1.51.1-150600.1.3.x86_64 ...............................................[done]
(94/98) Installing: typelib-1_0-Gtk-3_0-3.24.38+111-150600.3.3.1.x86_64 ................................[done]
(95/98) Installing: Mesa-libGL-devel-23.3.4-150600.85.pm.3.x86_64 ......................................[done]
(96/98) Installing: Mesa-libEGL-devel-23.3.4-150600.85.pm.3.x86_64 .....................................[done]
(97/98) Installing: libepoxy-devel-1.5.10-150500.1.2.x86_64 ............................................[done]
(98/98) Installing: gtk3-devel-3.24.38+111-150600.3.3.1.x86_64 .........................................[done]

─────────────────────────────────── Installing necessary Python packages ───────────────────────────────────

Requirement already satisfied: pip in /opt/auto-cpufreq/venv/lib/python3.6/site-packages (21.3.1)
Requirement already satisfied: wheel in /opt/auto-cpufreq/venv/lib/python3.6/site-packages (0.37.1)

─────────────────────────────────────── Installing auto-cpufreq tool ───────────────────────────────────────

Processing /home/emir/auto-cpufreq
  Installing build dependencies ... error
  ERROR: Command errored out with exit status 1:
   command: /opt/auto-cpufreq/venv/bin/python /opt/auto-cpufreq/venv/lib64/python3.6/site-packages/pip install --ignore-installed --no-user --prefix /tmp/pip-build-env-efzzj20l/overlay --no-warn-script-location --no-binary :none: --only-binary :none: -i https://pypi.org/simple -- 'poetry-core>=1.0.0' 'poetry-dynamic-versioning>=1.0.0,<2.0.0'
       cwd: None
  Complete output (4 lines):
  Collecting poetry-core>=1.0.0
    Using cached poetry_core-1.0.8-py2.py3-none-any.whl (425 kB)
  ERROR: Could not find a version that satisfies the requirement poetry-dynamic-versioning<2.0.0,>=1.0.0 (from versions: 0.1.0, 0.2.0, 0.3.0, 0.3.1, 0.3.2, 0.4.0, 0.5.0, 0.6.0, 0.7.0, 0.8.0, 0.8.1, 0.8.2, 0.8.3, 0.9.0, 0.10.0, 0.11.0, 0.12.0, 0.12.1, 0.12.2, 0.12.3, 0.12.4, 0.12.5, 0.12.6, 0.12.7, 0.13.0, 0.13.1, 0.14.0, 0.14.1, 0.15.0, 0.16.0, 0.17.0, 0.17.1, 1.0.0b1, 1.0.0b2, 1.0.0b3)
  ERROR: No matching distribution found for poetry-dynamic-versioning<2.0.0,>=1.0.0
  ----------------------------------------
WARNING: Discarding file:///home/emir/auto-cpufreq. Command errored out with exit status 1: /opt/auto-cpufreq/venv/bin/python /opt/auto-cpufreq/venv/lib64/python3.6/site-packages/pip install --ignore-installed --no-user --prefix /tmp/pip-build-env-efzzj20l/overlay --no-warn-script-location --no-binary :none: --only-binary :none: -i https://pypi.org/simple -- 'poetry-core>=1.0.0' 'poetry-dynamic-versioning>=1.0.0,<2.0.0' Check the logs for full command output.
ERROR: Command errored out with exit status 1: /opt/auto-cpufreq/venv/bin/python /opt/auto-cpufreq/venv/lib64/python3.6/site-packages/pip install --ignore-installed --no-user --prefix /tmp/pip-build-env-efzzj20l/overlay --no-warn-script-location --no-binary :none: --only-binary :none: -i https://pypi.org/simple -- 'poetry-core>=1.0.0' 'poetry-dynamic-versioning>=1.0.0,<2.0.0' Check the logs for full command output.


Add/paste error output in case of failed installation or other failing component

---

System information:

Add/paste output of:
Operating System: openSUSE Leap 15.6
KDE Plasma Version: 5.27.11
KDE Frameworks Version: 5.115.0
Qt Version: 5.15.12
Kernel Version: 6.4.0-150600.23.17-default (64-bit)
Graphics Platform: X11
Processors: 4 × Intel® Core™ i5-6300U CPU @ 2.40GHz
Memory: 15.4 GiB of RAM
Graphics Processor: Mesa Intel® HD Graphics 520
Manufacturer: Dell Inc.
Product Name: Latitude 7280

auto-cpufreq --debug

Also please be descriptive about the issue you're reporting, i.e: what you tried & what's the expected behaviour.

---

[AdnanHodzic]

It seems like something when wrong when it was trying to pull the poetry-core & poetry-dynamic-versioning package, can you try again or getting it from different repo?

[traptoo]

Same OS, similar error here:

────────────────────────────────────────────── Installing auto-cpufreq tool ──────────────────────────────────────────────

Processing /home/phillip/auto-cpufreq
  Installing build dependencies ... error
  ERROR: Command errored out with exit status 1:
   command: /opt/auto-cpufreq/venv/bin/python /opt/auto-cpufreq/venv/lib64/python3.6/site-packages/pip install --ignore-installed --no-user --prefix /tmp/pip-build-env-91v62dew/overlay --no-warn-script-location --no-binary :none: --only-binary :none: -i https://pypi.org/simple -- 'poetry-core>=1.0.0' 'poetry-dynamic-versioning>=1.0.0,<2.0.0'
       cwd: None
  Complete output (4 lines):
  Collecting poetry-core>=1.0.0
    Using cached poetry_core-1.0.8-py2.py3-none-any.whl (425 kB)
  ERROR: Could not find a version that satisfies the requirement poetry-dynamic-versioning<2.0.0,>=1.0.0 (from versions: 0.1.0, 0.2.0, 0.3.0, 0.3.1, 0.3.2, 0.4.0, 0.5.0, 0.6.0, 0.7.0, 0.8.0, 0.8.1, 0.8.2, 0.8.3, 0.9.0, 0.10.0, 0.11.0, 0.12.0, 0.12.1, 0.12.2, 0.12.3, 0.12.4, 0.12.5, 0.12.6, 0.12.7, 0.13.0, 0.13.1, 0.14.0, 0.14.1, 0.15.0, 0.16.0, 0.17.0, 0.17.1, 1.0.0b1, 1.0.0b2, 1.0.0b3)
  ERROR: No matching distribution found for poetry-dynamic-versioning<2.0.0,>=1.0.0
  ----------------------------------------
WARNING: Discarding file:///home/phillip/auto-cpufreq. Command errored out with exit status 1: /opt/auto-cpufreq/venv/bin/python /opt/auto-cpufreq/venv/lib64/python3.6/site-packages/pip install --ignore-installed --no-user --prefix /tmp/pip-build-env-91v62dew/overlay --no-warn-script-location --no-binary :none: --only-binary :none: -i https://pypi.org/simple -- 'poetry-core>=1.0.0' 'poetry-dynamic-versioning>=1.0.0,<2.0.0' Check the logs for full command output.
ERROR: Command errored out with exit status 1: /opt/auto-cpufreq/venv/bin/python /opt/auto-cpufreq/venv/lib64/python3.6/site-packages/pip install --ignore-installed --no-user --prefix /tmp/pip-build-env-91v62dew/overlay --no-warn-script-location --no-binary :none: --only-binary :none: -i https://pypi.org/simple -- 'poetry-core>=1.0.0' 'poetry-dynamic-versioning>=1.0.0,<2.0.0' Check the logs for full command output.

──────────────────────────────────────── auto-cpufreq tool successfully installed ────────────────────────────────────────

For list of options, run:
auto-cpufreq --help

Tried to install poetry-dynamic-versioning manually

phillip@localhost:~/auto-cpufreq> poetry self add "poetry-dynamic-versioning[plugin]"
Using version ^1.7.1 for poetry-dynamic-versioning

Updating dependencies
Resolving dependencies... Downloading https://files.pythonhosted.org/packages/e5/ca/1172b6638d52f2d6caa2dd262ec4c811ba59eee96d54a7701930726bce18/installer-0.7Resolving dependencies... Downloading https://files.pythonhosted.org/packages/99/bc/058b8ff87871fce6615ad032d62c773272f243266b110f7b86d146cf78d8/poetry_core-1Resolving dependencies... Downloading https://files.pythonhosted.org/packages/13/a3/a812df4e2dd5696d1f351d58b8fe16a405b234ad2886a0dab9183fb78109/pycparser-2.2Resolving dependencies... (7.5s)

Package operations: 4 installs, 28 updates, 0 removals

  • Updating pycparser (2.21 -> 2.22): Failed

  CalledProcessError

  Command '['/usr/bin/python3.11', '-m', 'pip', 'uninstall', 'pycparser', '-y']' returned non-zero exit status 2.

  at /usr/lib64/python3.11/subprocess.py:571 in run
       567│             # We don't call process.wait() as .__exit__ does that for us.
       568│             raise
       569│         retcode = process.poll()
       570│         if check and retcode:
    →  571│             raise CalledProcessError(retcode, process.args,
       572│                                      output=stdout, stderr=stderr)
       573│     return CompletedProcess(process.args, retcode, stdout, stderr)
       574│ 
       575│ 

The following error occurred when trying to handle this error:


  EnvCommandError

  Command ['/usr/bin/python3.11', '-m', 'pip', 'uninstall', 'pycparser', '-y'] errored with the following return code 2
  
  Output:
  Found existing installation: pycparser 2.21
  Uninstalling pycparser-2.21:
  ERROR: Exception:
  Traceback (most recent call last):
    File "/usr/lib64/python3.11/shutil.py", line 853, in move
      os.rename(src, real_dst)
  OSError: [Errno 18] Ungültiger Link über Gerätegrenzen hinweg: '/usr/lib/python3.11/site-packages/pycparser' -> '/tmp/pip-uninstall-hasty5oc'
  
  During handling of the above exception, another exception occurred:
  
  Traceback (most recent call last):
    File "/usr/local/lib/python3.11/site-packages/pip/_internal/cli/base_command.py", line 106, in _run_wrapper
      status = _inner_run()
               ^^^^^^^^^^^^
    File "/usr/local/lib/python3.11/site-packages/pip/_internal/cli/base_command.py", line 97, in _inner_run
      return self.run(options, args)
             ^^^^^^^^^^^^^^^^^^^^^^^
    File "/usr/local/lib/python3.11/site-packages/pip/_internal/commands/uninstall.py", line 106, in run
      uninstall_pathset = req.uninstall(
                          ^^^^^^^^^^^^^^
    File "/usr/local/lib/python3.11/site-packages/pip/_internal/req/req_install.py", line 723, in uninstall
      uninstalled_pathset.remove(auto_confirm, verbose)
    File "/usr/local/lib/python3.11/site-packages/pip/_internal/req/req_uninstall.py", line 370, in remove
      moved.stash(path)
    File "/usr/local/lib/python3.11/site-packages/pip/_internal/req/req_uninstall.py", line 261, in stash
      renames(path, new_path)
    File "/usr/local/lib/python3.11/site-packages/pip/_internal/utils/misc.py", line 350, in renames
      shutil.move(old, new)
    File "/usr/lib64/python3.11/shutil.py", line 871, in move
      rmtree(src)
    File "/usr/lib64/python3.11/shutil.py", line 752, in rmtree
      _rmtree_safe_fd(fd, path, onerror)
    File "/usr/lib64/python3.11/shutil.py", line 703, in _rmtree_safe_fd
      onerror(os.unlink, fullname, sys.exc_info())
    File "/usr/lib64/python3.11/shutil.py", line 701, in _rmtree_safe_fd
      os.unlink(entry.name, dir_fd=topfd)
  PermissionError: [Errno 13] Keine Berechtigung: '__init__.py'
  

  at /usr/lib/python3.11/site-packages/poetry/utils/env/base_env.py:354 in _run
      350│                 output = subprocess.check_output(
      351│                     cmd, stderr=stderr, env=env, text=True, **kwargs
      352│                 )
      353│         except CalledProcessError as e:
    → 354│             raise EnvCommandError(e)
      355│ 
      356│         return output
      357│ 
      358│     def execute(self, bin: str, *args: str, **kwargs: Any) -> int:

Cannot install pycparser.

Is this helpful?

[AdnanHodzic]

Think this is related to #808

@CaffineAddic if you're looking for way to contribute more, helping with this one would be great 🙂

[CaffineAddic]

Think this is related to #808

@CaffineAddic if you're looking for way to contribute more, helping with this one would be great 🙂

Copy that chief, I will create a leap VM and try diagnosing it

[CaffineAddic]

@AdnanHodzic which file has the python env install script, i.e. the line which is doing the pip install command

with list of packages.

[AdnanHodzic]

Not sure if you caught it, but you can also use auto-cpufreq genAI chatbot for this purpose 😉

• pyproject.toml defines the project dependencies but does not lock them to specific versions.
• poetry.lock contains the exact versions of all dependencies that Poetry has resolved.