One drawback of using /etc/fstab is that, regardless of how infrequently a user accesses the NFS mounted file system, the system must dedicate resources to keep the mounted file system in place. This is not a problem with one or two mounts, but when the system is maintaining mounts to many systems at one time, overall system performance can be affected. An alternative to /etc/fstab is to use the kernel-based automount utility. An automounter consists of two components:
- a kernel module that implements a file system, and
- a user-space daemon that performs all of the other functions.
The automount utility can mount and unmount NFS file systems automatically (on-demand mounting), therefore saving system resources. It can be used to mount other file systems including AFS, SMBFS, CIFS, and local file systems.
hese automatic mount points are mounted only when they are accessed, and unmounted after a certain period of inactivity. This on-demand behavior saves bandwidth and results in better performance than static mounts managed by /etc/fstab. While autofs is a control script, automount is the command (daemon) that does the actual auto-mounting.
Install the autofs package either by clicking here or entering the following in a terminal window: sudo apt install autofs
autofs can be configured by editing configuration files. There are other ways to configure autofs on a network (see AutofsLDAP), but config files provide the simplest setup.
The master configuration file for autofs is /etc/auto.master by default. Unless you have a good reason for changing this, leave it as the default.
Here is the sample file provided by Ubuntu:
#
# $Id: auto.master,v 1.4 2005/01/04 14:36:54 raven Exp $
#
# Sample auto.master file
# This is an automounter map and it has the following format
# key [ -mount-options-separated-by-comma ] location
# For details of the format look at autofs(5).
#/misc /etc/auto.misc --timeout=60
#/smb /etc/auto.smb
#/misc /etc/auto.misc
#/net /etc/auto.net
Each of the lines in auto.master describes a mount and the location of its map. These lines have the following format:
mount-point [map-type[,format]:] map [options]
The map files are usually named using the convention auto.<X>, where <X> can be anything as long as it matches an entry in auto.master and is valid for a file-name.
In this howto, we will configure autofs to auto-mount an NFS share, using a set of configuration files. This howto assumes that you are already familiar with NFS exports, and that you already have a properly-functioning NFS share on your network. Go to the NFS Setup Page to learn how to set up such a server.
3.11. Edit /etc/auto.master
The following step creates a mount point at /nfs and configures it according to the settings specified in /etc/auto.nfs (which we will create in the next step).
Type the following into a terminal: sudo vi /etc/auto.master
Add the following line at the end of /etc/auto.master: /nfs /etc/auto.nfs
3.2. Create /etc/auto.nfs
Now we will create the file which contains our automounter map: sudo vi /etc/auto.nfs
This file should contain a separate line for each NFS share. The format for a line is {mount point} [{mount options}] {location}. If you have previously configured static mounts in /etc/fstab, it may be helpful to refer to those. Remember, the mount points specified here will be relative to the mount point given in /etc/auto.master.
The following line is for shares using older versions of NFS (prior to version 4): server server:/
This creates a new mount point at /nfs/server/ and mounts the NFS root directory exported by the machine whose host-name is server.
3.2.1. NFSv4
If your NFS shares use NFSv4, you need to tell autofs about that. In such a case, the above line would appear as follows: server -fstype=nfs4 server:/
The client needs the same changes to /etc/default/nfs-common to connect to an NFSv4 server. In /etc/default/nfs-common we set:
NEED_IDMAPD=yes
NEED_GSSD=no # no is default
3.3. Unmount static mounts and edit /etc/fstab
If you have previously configured the NFS shares as static mounts, now is the time to unmount them: sudo umount /server
Next, remove (or comment out) their respective entries in /etc/fstab: #server:/ /server/ nfs defaults 0 0
3.4. Reload /etc/init.d/autofs
After entering your changes, run the following command to reload autofs: sudo systemctl restart autofs
3.5. Make sure it works
In order to access the share and verify that it is working properly, enter the following into a shell: ls /nfs/server
If you see your NFS share listed, congratulations! You have a functioning NFS mount via autofs! If you want to learn some more advanced information, keep reading here.