logging.h

/*
 * Copyright (c) 2019, NVIDIA CORPORATION. All rights reserved.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#ifndef TENSORRT_LOGGING_H
#define TENSORRT_LOGGING_H

#include "NvInferRuntimeCommon.h"
#include <cassert>
#include <ctime>
#include <iomanip>
#include <iostream>
#include <ostream>
#include <sstream>
#include <string>

#if NV_TENSORRT_MAJOR >= 8
#define TRT_NOEXCEPT noexcept
#else
#define TRT_NOEXCEPT
#endif

using Severity = nvinfer1::ILogger::Severity;

class LogStreamConsumerBuffer : public std::stringbuf
{
public:
    LogStreamConsumerBuffer(std::ostream& stream, const std::string& prefix, bool shouldLog)
        : mOutput(stream)
        , mPrefix(prefix)
        , mShouldLog(shouldLog)
    {
    }

    LogStreamConsumerBuffer(LogStreamConsumerBuffer&& other)
        : mOutput(other.mOutput)
    {
    }

    ~LogStreamConsumerBuffer()
    {
        // std::streambuf::pbase() gives a pointer to the beginning of the buffered part of the output sequence
        // std::streambuf::pptr() gives a pointer to the current position of the output sequence
        // if the pointer to the beginning is not equal to the pointer to the current position,
        // call putOutput() to log the output to the stream
        if (pbase() != pptr())
        {
            putOutput();
        }
    }

    // synchronizes the stream buffer and returns 0 on success
    // synchronizing the stream buffer consists of inserting the buffer contents into the stream,
    // resetting the buffer and flushing the stream
    virtual int sync()
    {
        putOutput();
        return 0;
    }

    void putOutput()
    {
        if (mShouldLog)
        {
            // prepend timestamp
            std::time_t timestamp = std::time(nullptr);
            tm* tm_local = std::localtime(&timestamp);
            std::cout << "[";
            std::cout << std::setw(2) << std::setfill('0') << 1 + tm_local->tm_mon << "/";
            std::cout << std::setw(2) << std::setfill('0') << tm_local->tm_mday << "/";
            std::cout << std::setw(4) << std::setfill('0') << 1900 + tm_local->tm_year << "-";
            std::cout << std::setw(2) << std::setfill('0') << tm_local->tm_hour << ":";
            std::cout << std::setw(2) << std::setfill('0') << tm_local->tm_min << ":";
            std::cout << std::setw(2) << std::setfill('0') << tm_local->tm_sec << "] ";
            // std::stringbuf::str() gets the string contents of the buffer
            // insert the buffer contents pre-appended by the appropriate prefix into the stream
            mOutput << mPrefix << str();
            // set the buffer to empty
            str("");
            // flush the stream
            mOutput.flush();
        }
    }

    void setShouldLog(bool shouldLog)
    {
        mShouldLog = shouldLog;
    }

private:
    std::ostream& mOutput;
    std::string mPrefix;
    bool mShouldLog;
};

//!
//! \class LogStreamConsumerBase
//! \brief Convenience object used to initialize LogStreamConsumerBuffer before std::ostream in LogStreamConsumer
//!
class LogStreamConsumerBase
{
public:
    LogStreamConsumerBase(std::ostream& stream, const std::string& prefix, bool shouldLog)
        : mBuffer(stream, prefix, shouldLog)
    {
    }

protected:
    LogStreamConsumerBuffer mBuffer;
};

//!
//! \class LogStreamConsumer
//! \brief Convenience object used to facilitate use of C++ stream syntax when logging messages.
//!  Order of base classes is LogStreamConsumerBase and then std::ostream.
//!  This is because the LogStreamConsumerBase class is used to initialize the LogStreamConsumerBuffer member field
//!  in LogStreamConsumer and then the address of the buffer is passed to std::ostream.
//!  This is necessary to prevent the address of an uninitialized buffer from being passed to std::ostream.
//!  Please do not change the order of the parent classes.
//!
class LogStreamConsumer : protected LogStreamConsumerBase, public std::ostream
{
public:
    //! \brief Creates a LogStreamConsumer which logs messages with level severity.
    //!  Reportable severity determines if the messages are severe enough to be logged.
    LogStreamConsumer(Severity reportableSeverity, Severity severity)
        : LogStreamConsumerBase(severityOstream(severity), severityPrefix(severity), severity <= reportableSeverity)
        , std::ostream(&mBuffer) // links the stream buffer with the stream
        , mShouldLog(severity <= reportableSeverity)
        , mSeverity(severity)
    {
    }

    LogStreamConsumer(LogStreamConsumer&& other)
        : LogStreamConsumerBase(severityOstream(other.mSeverity), severityPrefix(other.mSeverity), other.mShouldLog)
        , std::ostream(&mBuffer) // links the stream buffer with the stream
        , mShouldLog(other.mShouldLog)
        , mSeverity(other.mSeverity)
    {
    }

    void setReportableSeverity(Severity reportableSeverity)
    {
        mShouldLog = mSeverity <= reportableSeverity;
        mBuffer.setShouldLog(mShouldLog);
    }

private:
    static std::ostream& severityOstream(Severity severity)
    {
        return severity >= Severity::kINFO ? std::cout : std::cerr;
    }

    static std::string severityPrefix(Severity severity)
    {
        switch (severity)
        {
        case Severity::kINTERNAL_ERROR: return "[F] ";
        case Severity::kERROR: return "[E] ";
        case Severity::kWARNING: return "[W] ";
        case Severity::kINFO: return "[I] ";
        case Severity::kVERBOSE: return "[V] ";
        default: assert(0); return "";
        }
    }

    bool mShouldLog;
    Severity mSeverity;
};

//! \class Logger
//!
//! \brief Class which manages logging of TensorRT tools and samples
//!
//! \details This class provides a common interface for TensorRT tools and samples to log information to the console,
//! and supports logging two types of messages:
//!
//! - Debugging messages with an associated severity (info, warning, error, or internal error/fatal)
//! - Test pass/fail messages
//!
//! The advantage of having all samples use this class for logging as opposed to emitting directly to stdout/stderr is
//! that the logic for controlling the verbosity and formatting of sample output is centralized in one location.
//!
//! In the future, this class could be extended to support dumping test results to a file in some standard format
//! (for example, JUnit XML), and providing additional metadata (e.g. timing the duration of a test run).
//!
//! TODO: For backwards compatibility with existing samples, this class inherits directly from the nvinfer1::ILogger
//! interface, which is problematic since there isn't a clean separation between messages coming from the TensorRT
//! library and messages coming from the sample.
//!
//! In the future (once all samples are updated to use Logger::getTRTLogger() to access the ILogger) we can refactor the
//! class to eliminate the inheritance and instead make the nvinfer1::ILogger implementation a member of the Logger
//! object.

class Logger : public nvinfer1::ILogger
{
public:
    Logger(Severity severity = Severity::kWARNING)
        : mReportableSeverity(severity)
    {
    }

    //!
    //! \enum TestResult
    //! \brief Represents the state of a given test
    //!
    enum class TestResult
    {
        kRUNNING, //!< The test is running
        kPASSED,  //!< The test passed
        kFAILED,  //!< The test failed
        kWAIVED   //!< The test was waived
    };

    //!
    //! \brief Forward-compatible method for retrieving the nvinfer::ILogger associated with this Logger
    //! \return The nvinfer1::ILogger associated with this Logger
    //!
    //! TODO Once all samples are updated to use this method to register the logger with TensorRT,
    //! we can eliminate the inheritance of Logger from ILogger
    //!
    nvinfer1::ILogger& getTRTLogger()
    {
        return *this;
    }

    //!
    //! \brief Implementation of the nvinfer1::ILogger::log() virtual method
    //!
    //! Note samples should not be calling this function directly; it will eventually go away once we eliminate the
    //! inheritance from nvinfer1::ILogger
    //!
    void log(Severity severity, const char* msg) TRT_NOEXCEPT override
    {
        LogStreamConsumer(mReportableSeverity, severity) << "[TRT] " << std::string(msg) << std::endl;
    }

    //!
    //! \brief Method for controlling the verbosity of logging output
    //!
    //! \param severity The logger will only emit messages that have severity of this level or higher.
    //!
    void setReportableSeverity(Severity severity)
    {
        mReportableSeverity = severity;
    }

    //!
    //! \brief Opaque handle that holds logging information for a particular test
    //!
    //! This object is an opaque handle to information used by the Logger to print test results.
    //! The sample must call Logger::defineTest() in order to obtain a TestAtom that can be used
    //! with Logger::reportTest{Start,End}().
    //!
    class TestAtom
    {
    public:
        TestAtom(TestAtom&&) = default;

    private:
        friend class Logger;

        TestAtom(bool started, const std::string& name, const std::string& cmdline)
            : mStarted(started)
            , mName(name)
            , mCmdline(cmdline)
        {
        }

        bool mStarted;
        std::string mName;
        std::string mCmdline;
    };

    //!
    //! \brief Define a test for logging
    //!
    //! \param[in] name The name of the test.  This should be a string starting with
    //!                  "TensorRT" and containing dot-separated strings containing
    //!                  the characters [A-Za-z0-9_].
    //!                  For example, "TensorRT.sample_googlenet"
    //! \param[in] cmdline The command line used to reproduce the test
    //
    //! \return a TestAtom that can be used in Logger::reportTest{Start,End}().
    //!
    static TestAtom defineTest(const std::string& name, const std::string& cmdline)
    {
        return TestAtom(false, name, cmdline);
    }

    //!
    //! \brief A convenience overloaded version of defineTest() that accepts an array of command-line arguments
    //!        as input
    //!
    //! \param[in] name The name of the test
    //! \param[in] argc The number of command-line arguments
    //! \param[in] argv The array of command-line arguments (given as C strings)
    //!
    //! \return a TestAtom that can be used in Logger::reportTest{Start,End}().
    static TestAtom defineTest(const std::string& name, int argc, char const* const* argv)
    {
        auto cmdline = genCmdlineString(argc, argv);
        return defineTest(name, cmdline);
    }

    //!
    //! \brief Report that a test has started.
    //!
    //! \pre reportTestStart() has not been called yet for the given testAtom
    //!
    //! \param[in] testAtom The handle to the test that has started
    //!
    static void reportTestStart(TestAtom& testAtom)
    {
        reportTestResult(testAtom, TestResult::kRUNNING);
        assert(!testAtom.mStarted);
        testAtom.mStarted = true;
    }

    //!
    //! \brief Report that a test has ended.
    //!
    //! \pre reportTestStart() has been called for the given testAtom
    //!
    //! \param[in] testAtom The handle to the test that has ended
    //! \param[in] result The result of the test. Should be one of TestResult::kPASSED,
    //!                   TestResult::kFAILED, TestResult::kWAIVED
    //!
    static void reportTestEnd(const TestAtom& testAtom, TestResult result)
    {
        assert(result != TestResult::kRUNNING);
        assert(testAtom.mStarted);
        reportTestResult(testAtom, result);
    }

    static int reportPass(const TestAtom& testAtom)
    {
        reportTestEnd(testAtom, TestResult::kPASSED);
        return EXIT_SUCCESS;
    }

    static int reportFail(const TestAtom& testAtom)
    {
        reportTestEnd(testAtom, TestResult::kFAILED);
        return EXIT_FAILURE;
    }

    static int reportWaive(const TestAtom& testAtom)
    {
        reportTestEnd(testAtom, TestResult::kWAIVED);
        return EXIT_SUCCESS;
    }

    static int reportTest(const TestAtom& testAtom, bool pass)
    {
        return pass ? reportPass(testAtom) : reportFail(testAtom);
    }

    Severity getReportableSeverity() const
    {
        return mReportableSeverity;
    }

private:
    //!
    //! \brief returns an appropriate string for prefixing a log message with the given severity
    //!
    static const char* severityPrefix(Severity severity)
    {
        switch (severity)
        {
        case Severity::kINTERNAL_ERROR: return "[F] ";
        case Severity::kERROR: return "[E] ";
        case Severity::kWARNING: return "[W] ";
        case Severity::kINFO: return "[I] ";
        case Severity::kVERBOSE: return "[V] ";
        default: assert(0); return "";
        }
    }

    //!
    //! \brief returns an appropriate string for prefixing a test result message with the given result
    //!
    static const char* testResultString(TestResult result)
    {
        switch (result)
        {
        case TestResult::kRUNNING: return "RUNNING";
        case TestResult::kPASSED: return "PASSED";
        case TestResult::kFAILED: return "FAILED";
        case TestResult::kWAIVED: return "WAIVED";
        default: assert(0); return "";
        }
    }

    //!
    //! \brief returns an appropriate output stream (cout or cerr) to use with the given severity
    //!
    static std::ostream& severityOstream(Severity severity)
    {
        return severity >= Severity::kINFO ? std::cout : std::cerr;
    }

    //!
    //! \brief method that implements logging test results
    //!
    static void reportTestResult(const TestAtom& testAtom, TestResult result)
    {
        severityOstream(Severity::kINFO) << "&&&& " << testResultString(result) << " " << testAtom.mName << " # "
                                         << testAtom.mCmdline << std::endl;
    }

    //!
    //! \brief generate a command line string from the given (argc, argv) values
    //!
    static std::string genCmdlineString(int argc, char const* const* argv)
    {
        std::stringstream ss;
        for (int i = 0; i < argc; i++)
        {
            if (i > 0)
                ss << " ";
            ss << argv[i];
        }
        return ss.str();
    }

    Severity mReportableSeverity;
};

namespace
{

//!
//! \brief produces a LogStreamConsumer object that can be used to log messages of severity kVERBOSE
//!
//! Example usage:
//!
//!     LOG_VERBOSE(logger) << "hello world" << std::endl;
//!
inline LogStreamConsumer LOG_VERBOSE(const Logger& logger)
{
    return LogStreamConsumer(logger.getReportableSeverity(), Severity::kVERBOSE);
}

//!
//! \brief produces a LogStreamConsumer object that can be used to log messages of severity kINFO
//!
//! Example usage:
//!
//!     LOG_INFO(logger) << "hello world" << std::endl;
//!
inline LogStreamConsumer LOG_INFO(const Logger& logger)
{
    return LogStreamConsumer(logger.getReportableSeverity(), Severity::kINFO);
}

//!
//! \brief produces a LogStreamConsumer object that can be used to log messages of severity kWARNING
//!
//! Example usage:
//!
//!     LOG_WARN(logger) << "hello world" << std::endl;
//!
inline LogStreamConsumer LOG_WARN(const Logger& logger)
{
    return LogStreamConsumer(logger.getReportableSeverity(), Severity::kWARNING);
}

//!
//! \brief produces a LogStreamConsumer object that can be used to log messages of severity kERROR
//!
//! Example usage:
//!
//!     LOG_ERROR(logger) << "hello world" << std::endl;
//!
inline LogStreamConsumer LOG_ERROR(const Logger& logger)
{
    return LogStreamConsumer(logger.getReportableSeverity(), Severity::kERROR);
}

//!
//! \brief produces a LogStreamConsumer object that can be used to log messages of severity kINTERNAL_ERROR
//         ("fatal" severity)
//!
//! Example usage:
//!
//!     LOG_FATAL(logger) << "hello world" << std::endl;
//!
inline LogStreamConsumer LOG_FATAL(const Logger& logger)
{
    return LogStreamConsumer(logger.getReportableSeverity(), Severity::kINTERNAL_ERROR);
}

} // anonymous namespace

#endif // TENSORRT_LOGGING_H