For printed parts other than probemounts and nets, please visit the archived Armchair Enginnering Xol2 Repo.
| Instruction | |
|---|---|
| Tap six M2 holes in the Carriage as indicated. The bottom four are for probe mounting and the rear two are for microswitches. |  |
| Tap two M2 holes in the Dogbone as indicated for belt pretensioning. |  |
| Tap four M2 holes in the Hotend Mount for part cooling fans. You only need to go 8-10mm deep on the long rear holes. Going deeper risks breaking a tap. |  |
| Tap six M3 holes in the Carriage as indicated. |  |
| Tap three M3 holes in the Hotend Mount for the extruder mounting. |  |
| Finally, tap four M2.5 holes in the Hotend Mount as indicated for fan mounting. |  |
| Ensure the dogbone solid surface is holding the belt smooth face. |  |