Iam very happy to anduionos but i have abig problem the speed of connecting intrnet and update and upgrade is too slowly and i removed the system and install it again but still same problem.when i use ubuntu or linux mint on the same rourt and the same pc the wifi speed is fast .please can any one help me

[ahmedhassan8527]

Iam very happy to use anduionos but i have a big problem the speed of connecting internet and update and upgrade is too slowly and i removed the system and install it again but still same problem many times.when i use ubuntu or linux mint on the same rourter and the same pc the wifi speed is fast .please can any one help me

[Anduin2017]

Please share hardware info.

[Anduin2017]

Here are the diagnostic commands:

---

1. System and Kernel Information
Purpose: To understand the base of your OS and the kernel version you're running.

uname -a
lsb_release -a

2. Network Controller and Driver
Purpose: To identify your exact Wi-Fi card model and the kernel driver currently being used to manage it. This is often the source of the problem.

lspci -knn | grep -iA3 net

3. Network Interface Configuration
Purpose: To check if your Wi-Fi interface is active (UP) and has successfully received an IP address from your router.

ip addr show

4. Routing Table
Purpose: To ensure that network traffic is being sent to the correct gateway (your router).

ip route show

5. DNS Resolution Test
Purpose: To check if there is a delay when converting domain names (e.g., google.com) into IP addresses. If pinging the IP is fast but the domain is slow, DNS is the issue.

# First, show your configured DNS servers
cat /etc/resolv.conf

# Then, run these two tests
ping -c 4 8.8.8.8
ping -c 4 google.com

6. Objective Speed Test
Purpose: To get a precise measurement of your download and upload speeds to compare against the performance on Ubuntu/Mint.

# You may need to install this tool first. Since your system uses apt:
sudo apt update && sudo apt install speedtest-cli -y

# Then run the test
speedtest-cli

7. Package Manager Sources (Mirrors)
Purpose: Since updates are slow, we need to check if you are configured to use a distant or slow package mirror. This is a very common cause.

cat /etc/apt/sources.list
cat /etc/apt/sources.list.d/ubuntu.sources
ls -l /etc/apt/sources.list.d/

8. Kernel Log for Driver/Firmware Errors
Purpose: To scan the kernel's log for any errors or warnings related to your network hardware, especially missing firmware.

dmesg | grep -iE 'firmware|wifi|wlan|iwl|rtl|ath'

9. Wi-Fi Power Management
Purpose: To check if aggressive power-saving features are enabled for your Wi-Fi card, which can sometimes cause latency and performance issues.

iwconfig

10. NetworkManager Status
Purpose: To get a detailed report from NetworkManager itself about the state of your network devices and connection.

nmcli device show

---

When you reply, please paste the output for each command.

Once we have this information, we should be able to identify the bottleneck.