From c866c98ecf7b0d72541d5693e7cf711ce9ed1fce Mon Sep 17 00:00:00 2001
From: AndunHH <76771247+AndunHH@users.noreply.github.com>
Date: Sun, 16 Jun 2024 15:45:08 +0200
Subject: [PATCH] Update README.md

---
 README.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/README.md b/README.md
index fdd517b..04d90ea 100644
--- a/README.md
+++ b/README.md
@@ -120,7 +120,7 @@ After compiling and uploading the programm to your hardware, you can connect via
 
 Read and follow the instructions throughout the config.h file and write down your results. Recompile after every step.
 
-1. Check and correct your pin out -> Refer to the pictures in the (Electronics)[#electronics] section below.
+1. Check and correct your pin out -> Refer to the pictures in the [Electronics](#electronics) section below.
 2. Tune dead zone to avoid jittering
 3. Getting min and max values for your joysticks 
 	- There is a semi-automatic approach, which returns you the minimum and maximum values seen within 15s.