CONTRIBUTORS LET'S GO

[biancode]

Watch the contributor introduction video and read the CONTRIBUTION.MD

Start your contribution via gitpod!

[biancode]

Bookstore of BACnet documentation

[NubeDev]

We are keen we will be putting in some more dev next month

I also did some vaildation of node-bacnet against other systems
Tested both as a master and a BACnet-server using https://www.npmjs.com/package/@uq-its-ss/bacnet-device we added support to bacnet-device for onWriteProperty to do pointWrite

Testing perfomaed was the basics like whoIs, and read/write

Work well can read and write objects

Niagara N4 and niagara AX https://www.tridium.com/en/products-services/niagara-ax
Wago https://www.wago.com/au/bacnet
VTS https://sourceforge.net/projects/vts/
YABE https://sourceforge.net/projects/yetanotherbacnetexplorer/
BACnetStack http://bacnet.sourceforge.net/
Chipken free https://store.chipkin.com/products/tools/cas-bacnet-object-monitor
Chipken explorer https://store.chipkin.com/products/tools/cas-bacnet-explorer
Ineasoft https://www.inneasoft.com/en/bacnet-explorer/
BACnet-4j https://github.com/infiniteautomation/BACnet4J
Honeywell EBI https://buildings.honeywell.com/en-us/solutions/optimization/building-management-systems/ebi-600
Relible Studio RC https://www.reliablecontrols.com/products/software/RCST/

Didnt work on both but can discover the controller but can read/write any points

CBS Studio http://www.cbmsstudio.com/
BDT https://www.ccontrols.com/sd/bdt.htm

To do are

Schneider
Jonson controls
Alerton

[Apollon77]

Didnt work on both but can discover the controller but can read/write any points

Do you have any details here? I fixed two bugs in develop some days ago that affected communication with segmentation ... maybe this is a topic too?

[NubeDev]

Ok ill do some restesting.
Issue is that they both have limited degug logs

[biancode]

Ok ill do some restesting.
Issue is that they both have limited degug logs

did you see that you could set DEBUG=bacnet* ?

Options:

bacnet*debug
bacnet*trace

[Apollon77]

DEBUG=bacnet:*
To get full logs.

[Apollon77]

@NubeDev DO you have any chance that one of your above listed devices supprts "writePropertyMultiple"? I tried to verify that this works today but failed because only one of the simulators I have is supporting it and this one says "can not decode" ... but it also says that to a writePropertyMultiple that I build with VTS, so I assume that this simulator is broken :-(

[NubeDev]

Ya ill test it early next week