TFT stuck, can´t update #2372

slangpetter · 2024-11-08T12:16:50Z

TFT Version

4.3.12

Firmware Version

4.3.12

Blueprint Version

4.3.12

Panel Model

EU

What is the bug?

Hello! I tryed to update TFT-file to ver. 4.3.12 did not go so well. It dident complete the update. Now after a few tries I can't even get it to start updating. I've tried every method I could find online, NSPanel_blank, Tasmota and so on. Is there any way to completely reset the TFT module? I get the same error when I try in Tasmota as in ESPHome.

Steps to Reproduce

No response

Your Panel's YAML

No response

ESPHome Logs

No response

Home Assistant Logs

No response

edwardtfn · 2024-11-08T12:18:47Z

Could you please share the ESPHome logs from the moment you click the update button to when your panel restarts (or a few seconds after it restarts)?

slangpetter · 2024-11-08T12:34:41Z

Sorry, i didn't save it befor i tryed with Tasmota, stupid, i know... ;)
I only have the log from Tasmota

00:00:03.911 HTP: Web server active on tasmota-1D21BC-0444 with IP address 192.0.2.150
11:17:03.184 RSL: INFO1 = {"Info1":{"Module":"NSPanel","Version":"14.3.0(release-nspanel)","FallbackTopic":"cmnd/DVES_1D21BC_fb/","GroupTopic":"cmnd/tasmotas/"}}
11:17:03.197 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-1D21BC-0444","IPAddress":"192.0.2.150","IP6Global":"","IP6Local":"fe80::e665:b8ff:fe1d:21bc%st1"}}
11:17:03.210 RSL: INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":7}}
11:17:03.222 RSL: RESULT = {"POWER1":"OFF"}
11:17:03.223 RSL: POWER1 = OFF
11:17:03.224 RSL: RESULT = {"POWER2":"OFF"}
11:17:03.225 RSL: POWER2 = OFF
11:17:05.518 QPC: Reset
11:17:07.517 RSL: STATE = {"Time":"2024-11-08T11:17:07","Uptime":"0T00:00:09","UptimeSec":9,"Heap":154,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":206,"MqttCount":0,"Berry":{"HeapUsed":16,"Objects":216},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GrindaNet","BSSId":"38:D5:47:21:E6:81","Channel":1,"Mode":"HT40","RSSI":100,"Signal":-41,"LinkCount":1,"Downtime":"0T00:00:04"}}
11:17:07.554 RSL: SENSOR = {"Time":"2024-11-08T11:17:07","ANALOG":{"Temperature1":-1.8},"TempUnit":"C"}
11:18:16.742 CMD: FlashNextion https://grinda.duckdns.org:8123/local/nspanel_blank.tft
11:18:16.749 RSL: RESULT = {"FlashNextion":"Done"}
11:18:16.773 FLH: host: /grinda.duckdns.org, port: 8123, get: /local/nspanel_blank.tft
11:22:07.519 RSL: STATE = {"Time":"2024-11-08T11:22:07","Uptime":"0T00:05:09","UptimeSec":309,"Heap":152,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":575,"MqttCount":0,"Berry":{"HeapUsed":16,"Objects":220},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GrindaNet","BSSId":"38:D5:47:21:E6:81","Channel":1,"Mode":"HT40","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:04"}}
11:22:07.555 RSL: SENSOR = {"Time":"2024-11-08T11:22:07","ANALOG":{"Temperature1":-1.3},"TempUnit":"C"}
11:26:57.513 APP: Serial logging disabled
11:27:07.518 RSL: STATE = {"Time":"2024-11-08T11:27:07","Uptime":"0T00:10:09","UptimeSec":609,"Heap":152,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":733,"MqttCount":0,"Berry":{"HeapUsed":16,"Objects":220},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GrindaNet","BSSId":"38:D5:47:21:E6:81","Channel":1,"Mode":"HT40","RSSI":100,"Signal":-38,"LinkCount":1,"Downtime":"0T00:00:04"}}
11:27:07.523 RSL: SENSOR = {"Time":"2024-11-08T11:27:07","ANALOG":{"Temperature1":-0.9},"TempUnit":"C"}
11:32:07.517 RSL: STATE = {"Time":"2024-11-08T11:32:07","Uptime":"0T00:15:09","UptimeSec":909,"Heap":152,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":894,"MqttCount":0,"Berry":{"HeapUsed":16,"Objects":220},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GrindaNet","BSSId":"38:D5:47:21:E6:81","Channel":1,"Mode":"HT40","RSSI":100,"Signal":-36,"LinkCount":1,"Downtime":"0T00:00:04"}}
11:32:07.522 RSL: SENSOR = {"Time":"2024-11-08T11:32:07","ANALOG":{"Temperature1":-0.7},"TempUnit":"C"}
11:37:02.049 CMD: FlashNextion http://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
11:37:02.055 RSL: RESULT = {"FlashNextion":"Done"}
11:37:02.071 FLH: host: github.com, port: 80, get: /Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
11:37:02.584 HTTP/1.1 301 Moved Permanently
11:37:02.585
11:37:02.586 Content-Length: 0
11:37:02.587
11:37:02.588 Location: https://github.com:80/Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
11:37:02.589
11:37:02.590 connection: close
11:37:02.591
11:37:02.592
11:37:02.592
11:37:02.593
11:37:07.517 RSL: STATE = {"Time":"2024-11-08T11:37:07","Uptime":"0T00:20:09","UptimeSec":1209,"Heap":148,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":0,"Berry":{"HeapUsed":16,"Objects":221},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GrindaNet","BSSId":"38:D5:47:21:E6:81","Channel":1,"Mode":"HT40","RSSI":100,"Signal":-40,"LinkCount":1,"Downtime":"0T00:00:04"}}
11:37:07.522 RSL: SENSOR = {"Time":"2024-11-08T11:37:07","ANALOG":{"Temperature1":-0.4},"TempUnit":"C"}
11:37:37.716 CMD: FlashNextion http://nspanel.pky.eu/lui-release.tft
11:37:37.721 RSL: RESULT = {"FlashNextion":"Done"}
11:37:37.760 FLH: host: nspanel.pky.eu, port: 80, get: /lui-release.tft
11:41:25.580 CMD: FlashNextion http://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
11:41:25.585 RSL: RESULT = {"FlashNextion":"Done"}
11:41:25.611 FLH: host: github.com, port: 80, get: /Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
11:41:25.880 HTTP/1.1 301 Moved Permanently
11:41:25.881
11:41:25.882 Content-Length: 0
11:41:25.884
11:41:25.885 Location: https://github.com:80/Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
11:41:25.887
11:41:25.888 connection: close
11:41:25.889
11:41:25.890
11:41:25.892
11:41:25.893
11:42:07.537 RSL: STATE = {"Time":"2024-11-08T11:42:07","Uptime":"0T00:25:09","UptimeSec":1509,"Heap":149,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":0,"Berry":{"HeapUsed":16,"Objects":221},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GrindaNet","BSSId":"38:D5:47:21:E6:81","Channel":1,"Mode":"HT40","RSSI":100,"Signal":-42,"LinkCount":1,"Downtime":"0T00:00:04"}}
11:42:07.545 RSL: SENSOR = {"Time":"2024-11-08T11:42:07","ANALOG":{"Temperature1":-0.3},"TempUnit":"C"}
11:47:07.528 RSL: STATE = {"Time":"2024-11-08T11:47:07","Uptime":"0T00:30:09","UptimeSec":1809,"Heap":138,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":0,"Berry":{"HeapUsed":16,"Objects":221},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GrindaNet","BSSId":"38:D5:47:21:E6:81","Channel":1,"Mode":"HT40","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:04"}}
11:47:07.536 RSL: SENSOR = {"Time":"2024-11-08T11:47:07","ANALOG":{"Temperature1":-0.1},"TempUnit":"C"}
11:52:07.518 RSL: STATE = {"Time":"2024-11-08T11:52:07","Uptime":"0T00:35:09","UptimeSec":2109,"Heap":149,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":0,"Berry":{"HeapUsed":16,"Objects":221},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GrindaNet","BSSId":"38:D5:47:21:E6:81","Channel":1,"Mode":"HT40","RSSI":100,"Signal":-44,"LinkCount":1,"Downtime":"0T00:00:04"}}
11:52:07.525 RSL: SENSOR = {"Time":"2024-11-08T11:52:07","ANALOG":{"Temperature1":0.0},"TempUnit":"C"}
11:52:32.252 CMD: FlashNextion http://192.0.2.2/nspanel_blank.tft
11:52:32.257 RSL: RESULT = {"FlashNextion":"Done"}
11:52:32.275 FLH: host: 192.0.2.2, port: 80, get: /nspanel_blank.tft
11:57:07.524 RSL: STATE = {"Time":"2024-11-08T11:57:07","Uptime":"0T00:40:09","UptimeSec":2409,"Heap":142,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":0,"Berry":{"HeapUsed":21,"Objects":221},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GrindaNet","BSSId":"38:D5:47:21:E6:81","Channel":1,"Mode":"HT40","RSSI":100,"Signal":-38,"LinkCount":1,"Downtime":"0T00:00:04"}}
11:57:07.533 RSL: SENSOR = {"Time":"2024-11-08T11:57:07","ANALOG":{"Temperature1":0.1},"TempUnit":"C"}
11:59:12.490 CMD: FlashNextion 192.0.2.2/lui-release.tft
11:59:12.496 RSL: RESULT = {"FlashNextion":"Done"}
11:59:12.519 FLH: host: .2, port: 80, get: /lui-release.tft
12:02:09.547 RSL: STATE = {"Time":"2024-11-08T12:02:09","Uptime":"0T00:45:11","UptimeSec":2711,"Heap":142,"SleepMode":"Dynamic","Sleep":0,"LoadAvg":999,"MqttCount":0,"Berry":{"HeapUsed":21,"Objects":221},"POWER1":"OFF","POWER2":"OFF","Wifi":{"AP":1,"SSId":"GrindaNet","BSSId":"38:D5:47:21:E6:81","Channel":1,"Mode":"HT40","RSSI":100,"Signal":-41,"LinkCount":1,"Downtime":"0T00:00:04"}}
12:02:09.554 RSL: SENSOR = {"Time":"2024-11-08T12:02:09","ANALOG":{"Temperature1":0.2},"TempUnit":"C"}

edwardtfn · 2024-11-08T12:58:19Z

I couldn't get that much from your log, but looks like the connection to the server was interrupted.
I would suggest you flash it again with our firmware (ESPHome) and try it again, now capturing the logs ( which will be way more detailed).

slangpetter · 2024-11-08T13:02:35Z

INFO Reading configuration /config/esphome/nslekrum2.yaml...
INFO Detected timezone 'Europe/Stockholm'
INFO Starting log output from 192.0.2.150 using esphome API
INFO Successfully connected to nslekrum2 @ 192.0.2.150 in 0.189s
INFO Successful handshake with nslekrum2 @ 192.0.2.150 in 0.101s
[14:00:41][I][app:100]: ESPHome version 2024.10.2 compiled on Nov 8 2024, 13:24:42
[14:00:41][I][app:102]: Project esphome.NSPanel_HA_Blueprint version 4.3.12
[14:00:41][C][wifi:600]: WiFi:
[14:00:41][C][wifi:428]: Local MAC: E4:65:B8:1D:21:BC
[14:00:41][C][wifi:433]: SSID: [redacted]
[14:00:41][C][wifi:436]: IP Address: 192.0.2.150
[14:00:41][C][wifi:440]: BSSID: [redacted]
[14:00:41][C][wifi:441]: Hostname: 'nslekrum2'
[14:00:41][C][wifi:443]: Signal strength: -34 dB ▂▄▆█
[14:00:41][C][wifi:447]: Channel: 1
[14:00:41][C][wifi:448]: Subnet: 255.255.255.0
[14:00:41][C][wifi:449]: Gateway: 192.0.2.4
[14:00:41][C][wifi:450]: DNS1: 8.8.8.8
[14:00:41][C][wifi:451]: DNS2: 8.8.4.4
[14:00:41][C][logger:185]: Logger:
[14:00:41][C][logger:186]: Level: DEBUG
[14:00:41][C][logger:188]: Log Baud Rate: 0
[14:00:41][C][logger:189]: Hardware UART: UART0
[14:00:41][C][uart.idf:159]: UART Bus 0:
[14:00:41][C][uart.idf:160]: TX Pin: GPIO16
[14:00:41][C][uart.idf:161]: RX Pin: GPIO17
[14:00:41][C][uart.idf:163]: RX Buffer Size: 256
[14:00:41][C][uart.idf:165]: Baud Rate: 115200 baud
[14:00:41][C][uart.idf:166]: Data Bits: 8
[14:00:41][C][uart.idf:167]: Parity: NONE
[14:00:41][C][uart.idf:168]: Stop bits: 1
[14:00:41][C][ledc.output:180]: LEDC Output:
[14:00:41][C][ledc.output:181]: Pin GPIO21
[14:00:41][C][ledc.output:182]: LEDC Channel: 0
[14:00:41][C][ledc.output:183]: PWM Frequency: 1000.0 Hz
[14:00:41][C][ledc.output:184]: Phase angle: 0.0°
[14:00:41][C][ledc.output:185]: Bit depth: 16
[14:00:41][C][template.binary_sensor:028]: Template Binary Sensor 'Nextion display'
[14:00:41][C][template.binary_sensor:028]: Device Class: 'connectivity'
[14:00:41][C][template.number:050]: Template Number 'Display Brightness'
[14:00:41][C][template.number:050]: Unit of Measurement: '%'
[14:00:41][C][template.number:051]: Optimistic: YES
[14:00:41][C][template.number:052]: Update Interval: 60.0s
[14:00:41][W][nextion:091]: Nextion is not connected!
[14:00:41][C][template.number:050]: Template Number 'Display Brightness Dimdown'
[14:00:41][C][template.number:050]: Unit of Measurement: '%'
[14:00:41][C][template.number:051]: Optimistic: YES
[14:00:41][C][template.number:052]: Update Interval: 60.0s
[14:00:41][C][template.number:050]: Template Number 'Display Brightness Sleep'
[14:00:41][C][template.number:050]: Unit of Measurement: '%'
[14:00:41][C][template.number:051]: Optimistic: YES
[14:00:41][C][template.number:052]: Update Interval: 60.0s
[14:00:41][C][template.number:050]: Template Number 'Temperature Correction'
[14:00:41][C][template.number:050]: Unit of Measurement: '°C'
[14:00:41][C][template.number:051]: Optimistic: YES
[14:00:41][C][template.number:052]: Update Interval: 60.0s
[14:00:41][C][template.number:050]: Template Number 'Timeout Page'
[14:00:41][C][template.number:050]: Icon: 'mdi:timer'
[14:00:41][C][template.number:050]: Unit of Measurement: 's'
[14:00:41][C][template.number:051]: Optimistic: YES
[14:00:41][C][template.number:052]: Update Interval: 60.0s
[14:00:41][C][template.number:050]: Template Number 'Timeout Dimming'
[14:00:41][C][template.number:050]: Icon: 'mdi:timer'
[14:00:41][C][template.number:050]: Unit of Measurement: 's'
[14:00:41][C][template.number:051]: Optimistic: YES
[14:00:41][C][template.number:052]: Update Interval: 60.0s
[14:00:41][C][template.number:050]: Template Number 'Timeout Sleep'
[14:00:41][C][template.number:050]: Icon: 'mdi:timer'
[14:00:41][C][template.number:050]: Unit of Measurement: 's'
[14:00:41][C][template.number:051]: Optimistic: YES
[14:00:41][C][template.number:052]: Update Interval: 60.0s
[14:00:41][C][template.select:065]: Template Select 'Baud rate'
[14:00:41][C][template.select:065]: Icon: 'mdi:swap-horizontal'
[14:00:41][C][template.select:066]: Update Interval: 60.0s
[14:00:41][C][template.select:069]: Optimistic: YES
[14:00:41][C][template.select:070]: Initial Option: 115200
[14:00:41][C][template.select:071]: Restore Value: YES
[14:00:41][C][template.select:065]: Template Select 'Wake-up page'
[14:00:41][C][template.select:065]: Icon: 'mdi:page-next-outline'
[14:00:41][C][template.select:066]: Update Interval: 60.0s
[14:00:41][C][template.select:069]: Optimistic: YES
[14:00:41][C][template.select:070]: Initial Option: home
[14:00:41][C][template.select:071]: Restore Value: YES
[14:00:41][C][template.select:065]: Template Select 'Update TFT display - Model'
[14:00:41][C][template.select:065]: Icon: 'mdi:file-sync'
[14:00:41][C][template.select:066]: Update Interval: 60.0s
[14:00:41][C][template.select:069]: Optimistic: YES
[14:00:41][C][template.select:070]: Initial Option: NSPanel EU
[14:00:41][C][template.select:071]: Restore Value: YES
[14:00:41][C][template.select:065]: Template Select 'Update TFT display - Baud rate'
[14:00:41][C][template.select:065]: Icon: 'mdi:swap-horizontal'
[14:00:41][C][template.select:066]: Update Interval: 60.0s
[14:00:41][C][template.select:069]: Optimistic: YES
[14:00:41][C][template.select:070]: Initial Option: 921600
[14:00:41][C][template.select:071]: Restore Value: YES
[14:00:41][C][switch.gpio:068]: GPIO Switch 'Nextion display - Power'
[14:00:41][C][switch.gpio:091]: Restore Mode: always ON
[14:00:41][C][switch.gpio:031]: Pin: GPIO4
[14:00:41][C][template.text_sensor:020]: Template Sensor 'Device Name'
[14:00:41][C][template.text_sensor:020]: Icon: 'mdi:identifier'
[14:00:41][C][template.text_sensor:020]: Template Sensor 'Detailed Entity'
[14:00:41][C][template.text_sensor:020]: Icon: 'mdi:tablet-dashboard'
[14:00:41][C][template.text_sensor:020]: Template Sensor 'Notification Label'
[14:00:41][C][template.text_sensor:020]: Template Sensor 'Notification Text'
[14:00:41][C][template.text_sensor:020]: Template Sensor 'Version Blueprint'
[14:00:41][C][template.text_sensor:020]: Icon: 'mdi:tag-text-outline'
[14:00:41][C][template.text_sensor:020]: Template Sensor 'Version ESPHome'
[14:00:41][C][template.text_sensor:020]: Icon: 'mdi:tag-text-outline'
[14:00:41][C][template.sensor:022]: Template Sensor 'Blueprint'
[14:00:41][C][template.sensor:022]: State Class: ''
[14:00:41][C][template.sensor:022]: Unit of Measurement: '%'
[14:00:41][C][template.sensor:022]: Accuracy Decimals: 1
[14:00:41][C][template.sensor:022]: Icon: 'mdi:link-variant'
[14:00:41][C][template.sensor:023]: Update Interval: 60.0s
[14:00:41][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Left Button'
[14:00:41][C][gpio.binary_sensor:016]: Pin: GPIO14
[14:00:41][W][nextion:091]: Nextion is not connected!
[14:00:41][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Right Button'
[14:00:41][C][gpio.binary_sensor:016]: Pin: GPIO27
[14:00:41][C][switch.gpio:068]: GPIO Switch 'Relay 1'
[14:00:41][C][switch.gpio:091]: Restore Mode: restore defaults to OFF
[14:00:41][C][switch.gpio:031]: Pin: GPIO22
[14:00:41][C][switch.gpio:068]: GPIO Switch 'Relay 2'
[14:00:41][C][switch.gpio:091]: Restore Mode: restore defaults to OFF
[14:00:41][C][switch.gpio:031]: Pin: GPIO19
[14:00:42][C][template.switch:068]: Template Switch 'Notification unread'
[14:00:42][C][template.switch:091]: Restore Mode: always OFF
[14:00:42][C][template.switch:057]: Optimistic: YES
[14:00:42][C][template.switch:068]: Template Switch 'Notification sound'
[14:00:42][C][template.switch:091]: Restore Mode: restore defaults to OFF
[14:00:42][C][template.switch:057]: Optimistic: YES
[14:00:42][C][template.switch:068]: Template Switch 'Relay 0 (dummy)'
[14:00:42][C][template.switch:091]: Restore Mode: always OFF
[14:00:42][C][template.switch:057]: Optimistic: YES
[14:00:42][C][psram:020]: PSRAM:
[14:00:42][C][psram:021]: Available: YES
[14:00:42][C][psram:024]: Size: 2036 KB
[14:00:42][C][rtttl:029]: Rtttl
[14:00:42][C][nextion:138]: Nextion:
[14:00:42][C][nextion:142]: Device Model:
[14:00:42][C][nextion:143]: Firmware Version:
[14:00:42][C][nextion:144]: Serial Number:
[14:00:42][C][nextion:145]: Flash Size:
[14:00:42][C][nextion:147]: Wake On Touch: YES
[14:00:42][C][nextion:148]: Exit reparse: YES
[14:00:42][C][factory_reset.button:011]: Factory Reset Button 'Factory reset'
[14:00:42][C][factory_reset.button:011]: Icon: 'mdi:restart-alert'
[14:00:42][C][restart.button:017]: Restart Button 'Restart'
[14:00:42][C][restart.button:017]: Icon: 'mdi:restart'
[14:00:42][C][adc:097]: ADC Sensor 'ntc_source'
[14:00:42][C][adc:097]: Device Class: 'voltage'
[14:00:42][C][adc:097]: State Class: 'measurement'
[14:00:42][C][adc:097]: Unit of Measurement: 'V'
[14:00:42][C][adc:097]: Accuracy Decimals: 2
[14:00:42][C][adc:107]: Pin: GPIO38
[14:00:42][C][adc:122]: Attenuation: 12db
[14:00:42][C][adc:141]: Samples: 4
[14:00:42][C][adc:142]: Update Interval: 10.0s
[14:00:42][C][resistance:010]: Resistance Sensor 'resistance_sensor'
[14:00:42][C][resistance:010]: State Class: 'measurement'
[14:00:42][C][resistance:010]: Unit of Measurement: 'Ω'
[14:00:42][C][resistance:010]: Accuracy Decimals: 1
[14:00:42][C][resistance:010]: Icon: 'mdi:flash'
[14:00:42][C][resistance:011]: Configuration: DOWNSTREAM
[14:00:42][C][resistance:012]: Resistor: 11200.00Ω
[14:00:42][C][resistance:013]: Reference Voltage: 3.3V
[14:00:42][C][ntc:014]: NTC Sensor 'Temperature'
[14:00:42][C][ntc:014]: Device Class: 'temperature'
[14:00:42][C][ntc:014]: State Class: 'measurement'
[14:00:42][C][ntc:014]: Unit of Measurement: '°C'
[14:00:42][C][ntc:014]: Accuracy Decimals: 1
[14:00:42][C][thermostat.climate:1296]: Thermostat 'Thermostat'
[14:00:42][C][thermostat.climate:1301]: Start-up Delay Enabled: NO
[14:00:42][C][thermostat.climate:1317]: Heating Parameters:
[14:00:42][C][thermostat.climate:1318]: Deadband: 0.5°C
[14:00:42][C][thermostat.climate:1319]: Overrun: 0.5°C
[14:00:42][C][thermostat.climate:1326]: Minimum Off Time: 300s
[14:00:42][C][thermostat.climate:1328]: Minimum Run Time: 300s
[14:00:42][C][thermostat.climate:1343]: Minimum Idle Time: 30s
[14:00:42][C][thermostat.climate:1344]: Supports AUTO: NO
[14:00:42][C][thermostat.climate:1345]: Supports HEAT/COOL: NO
[14:00:42][C][thermostat.climate:1346]: Supports COOL: NO
[14:00:42][C][thermostat.climate:1347]: Supports DRY: NO
[14:00:42][C][thermostat.climate:1348]: Supports FAN_ONLY: NO
[14:00:42][C][thermostat.climate:1350]: Supports FAN_ONLY_ACTION_USES_FAN_MODE_TIMER: NO
[14:00:42][C][thermostat.climate:1351]: Supports FAN_ONLY_COOLING: NO
[14:00:42][C][thermostat.climate:1356]: Supports FAN_WITH_HEATING: NO
[14:00:42][C][thermostat.climate:1358]: Supports HEAT: YES
[14:00:42][C][thermostat.climate:1359]: Supports FAN MODE ON: NO
[14:00:42][C][thermostat.climate:1360]: Supports FAN MODE OFF: NO
[14:00:42][C][thermostat.climate:1361]: Supports FAN MODE AUTO: NO
[14:00:42][C][thermostat.climate:1362]: Supports FAN MODE LOW: NO
[14:00:42][C][thermostat.climate:1363]: Supports FAN MODE MEDIUM: NO
[14:00:42][C][thermostat.climate:1364]: Supports FAN MODE HIGH: NO
[14:00:42][C][thermostat.climate:1365]: Supports FAN MODE MIDDLE: NO
[14:00:42][C][thermostat.climate:1366]: Supports FAN MODE FOCUS: NO
[14:00:42][C][thermostat.climate:1367]: Supports FAN MODE DIFFUSE: NO
[14:00:42][C][thermostat.climate:1368]: Supports FAN MODE QUIET: NO
[14:00:42][C][thermostat.climate:1369]: Supports SWING MODE BOTH: NO
[14:00:42][C][thermostat.climate:1370]: Supports SWING MODE OFF: NO
[14:00:42][C][thermostat.climate:1371]: Supports SWING MODE HORIZONTAL: NO
[14:00:42][C][thermostat.climate:1372]: Supports SWING MODE VERTICAL: NO
[14:00:42][C][thermostat.climate:1373]: Supports TWO SET POINTS: NO
[14:00:42][C][thermostat.climate:1375]: Supported PRESETS:
[14:00:42][C][thermostat.climate:1379]: Supports HOME: YES
[14:00:42][C][thermostat.climate:963]: HOME Is Default: NO
[14:00:42][C][thermostat.climate:970]: HOME Default Target Temperature Low: 18.0°C
[14:00:42][C][thermostat.climate:984]: HOME Default Mode: HEAT
[14:00:42][C][thermostat.climate:1383]: Supported CUSTOM PRESETS:
[14:00:42][C][thermostat.climate:1387]: Supports Off: YES
[14:00:42][C][thermostat.climate:963]: Off Is Default: YES
[14:00:42][C][thermostat.climate:970]: Off Default Target Temperature Low: 18.0°C
[14:00:42][C][thermostat.climate:984]: Off Default Mode: OFF
[14:00:42][C][thermostat.climate:1391]: On boot, restore from: MEMORY
[14:00:42][W][nextion:091]: Nextion is not connected!
[14:00:42][C][homeassistant.time:010]: Home Assistant Time:
[14:00:42][C][homeassistant.time:011]: Timezone: 'CET-1CEST,M3.5.0,M10.5.0/3'
[14:00:42][C][mdns:116]: mDNS:
[14:00:42][C][mdns:117]: Hostname: nslekrum2
[14:00:42][W][nextion:091]: Nextion is not connected!
[14:00:42][C][esphome.ota:073]: Over-The-Air updates:
[14:00:42][C][esphome.ota:074]: Address: nslekrum2.local:3232
[14:00:42][C][esphome.ota:075]: Version: 2
[14:00:42][C][esphome.ota:078]: Password configured
[14:00:42][C][safe_mode:018]: Safe Mode:
[14:00:42][C][safe_mode:020]: Boot considered successful after 60 seconds
[14:00:42][C][safe_mode:021]: Invoke after 3 boot attempts
[14:00:42][C][safe_mode:023]: Remain in safe mode for 180 seconds
[14:00:42][C][api:140]: API Server:
[14:00:42][C][api:141]: Address: nslekrum2.local:6053
[14:00:42][C][api:143]: Using noise encryption: YES
[14:00:42][C][wifi_signal.sensor:010]: WiFi Signal 'RSSI'
[14:00:42][C][wifi_signal.sensor:010]: Device Class: 'signal_strength'
[14:00:42][C][wifi_signal.sensor:010]: State Class: 'measurement'
[14:00:42][C][wifi_signal.sensor:010]: Unit of Measurement: 'dBm'
[14:00:42][C][wifi_signal.sensor:010]: Accuracy Decimals: 0
[14:00:42][C][wifi_signal.sensor:010]: Icon: 'mdi:wifi'
[14:00:43][W][nextion:091]: Nextion is not connected!
[14:00:43][W][nextion:091]: Nextion is not connected!
[14:00:44][W][nextion:091]: Nextion is not connected!
[14:00:44][W][nextion:091]: Nextion is not connected!
[14:00:45][W][nextion:091]: Nextion is not connected!
[14:00:45][W][nextion:091]: Nextion is not connected!
[14:00:46][D][sensor:094]: 'ntc_source': Sending state 1.64133 V with 2 decimals of accuracy
[14:00:46][D][resistance:039]: 'resistance_sensor' - Resistance 11083.0Ω
[14:00:46][D][sensor:094]: 'resistance_sensor': Sending state 11082.95996 Ω with 1 decimals of accuracy
[14:00:46][D][ntc:026]: 'Temperature' - Temperature: 22.7°C
[14:00:46][D][sensor:094]: 'Temperature': Sending state 22.70380 °C with 1 decimals of accuracy
[14:00:46][D][climate:396]: 'Thermostat' - Sending state:
[14:00:46][D][climate:399]: Mode: OFF
[14:00:46][D][climate:401]: Action: OFF
[14:00:46][D][climate:413]: Custom Preset: Off
[14:00:46][D][climate:419]: Current Temperature: 22.70°C
[14:00:46][D][climate:425]: Target Temperature: 18.00°C
[14:00:46][W][nextion:091]: Nextion is not connected!
[14:00:46][D][select:062]: 'Update TFT display - Model' - Setting
[14:00:46][D][select:115]: 'Update TFT display - Model' - Set selected option to: Use nextion_update_url
[14:00:46][D][select:015]: 'Update TFT display - Model': Sending state Use nextion_update_url (index 0)
[14:00:47][W][nextion:091]: Nextion is not connected!
[14:00:47][W][nextion:091]: Nextion is not connected!
[14:00:48][W][nextion:091]: Nextion is not connected!
[14:00:48][W][nextion:091]: Nextion is not connected!
[14:00:49][W][nextion:091]: Nextion is not connected!
[14:00:49][W][nextion:091]: Nextion is not connected!
[14:00:50][W][nextion:091]: Nextion is not connected!
[14:00:50][W][nextion:091]: Nextion is not connected!
[14:00:50][D][button:010]: 'Update TFT display' Pressed.
[14:00:51][C][nspanel_ha_blueprint:2224]: Wi-Fi: Excellent (-34 dBm)
[14:00:51][C][nspanel_ha_blueprint:2235]: API: Connected
[14:00:51][C][nspanel_ha_blueprint:2243]: Blueprint:
[14:00:51][C][nspanel_ha_blueprint:2245]: Version: 4.3.12
[14:00:51][C][nspanel_ha_blueprint:2246]: Init steps: 62 (100.0%)
[14:00:51][C][nspanel_ha_blueprint:2255]: ESPHome:
[14:00:51][C][nspanel_ha_blueprint:2256]: Version: 4.3.12
[14:00:51][C][nspanel_ha_blueprint:2257]: Compiler: 2024.10.2
[14:00:51][C][nspanel_ha_blueprint:2262]: Framework: ESP-IDF
[14:00:51][C][nspanel_ha_blueprint:2267]: Free heap:
[14:00:51][C][nspanel_ha_blueprint:2271]: Internal: 200700 bytes (57.1%)
[14:00:51][C][nspanel_ha_blueprint:2281]: PSRAM: 2011883 bytes (96.5%)
[14:00:51][C][nspanel_ha_blueprint:2288]: UART:
[14:00:51][C][nspanel_ha_blueprint:2289]: Baud rate: 115200 bps
[14:00:51][C][nspanel_ha_blueprint:2290]: Queue size: 0
[14:00:51][C][nspanel_ha_blueprint:2294]: Nextion:
[14:00:51][C][nspanel_ha_blueprint:2295]: Queue size: 0
[14:00:51][W][nspanel_ha_blueprint:2299]: Is setup: False
[14:00:51][W][nspanel_ha_blueprint:2300]: Is detected: NO
[14:00:51][W][nspanel_ha_blueprint:2306]: Init: False
[14:00:51][W][nspanel_ha_blueprint:2308]: TFT: UNKNOWN
[14:00:51][C][nspanel_ha_blueprint:2311]: Packages:
[14:00:51][C][nspanel_ha_blueprint:2313]: - Core
[14:00:51][C][nspanel_ha_blueprint:2322]: - Upload TFT
[14:00:51][C][nspanel_ha_blueprint:2325]: - Climate - Base
[14:00:51][C][nspanel_ha_blueprint:2334]: - Climate - Heat
[14:00:51][C][nspanel_ha_blueprint:097]: Add-on Upload TFT:
[14:00:51][C][nspanel_ha_blueprint:098]: File model: Use nextion_update_url
[14:00:51][C][nspanel_ha_blueprint:099]: Valid TFT: NO
[14:00:51][C][nspanel_ha_blueprint:133]: Add-on climate:
[14:00:51][C][nspanel_ha_blueprint:142]: Heat: Enabled
[14:00:51][E][nspanel_ha_blueprint:146]: Relay: 0
[14:00:51][W][component:237]: Component script took a long time for an operation (76 ms).
[14:00:51][W][component:238]: Components should block for at most 30 ms.
[14:00:51][W][nextion:091]: Nextion is not connected!
[14:00:51][W][nextion:091]: Nextion is not connected!
[14:00:52][W][nextion:091]: Nextion is not connected!
[14:00:52][D][script.check_versions:2131]: Versions:
[14:00:52][D][script.check_versions:2132]: TFT:
[14:00:52][D][script.check_versions:2133]: ESPHome: 4.3.12
[14:00:52][E][script.check_versions:2135]: TFT version mismatch!
[14:00:52][D][script.check_versions:2136]: Blueprint: 4.3.12
[14:00:52][D][script.timer_sleep:3298]: Going to sleep from page
[14:00:52][W][nextion:091]: Nextion is not connected!
[14:00:52][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[14:00:53][W][nextion:091]: Nextion is not connected!
[14:00:53][W][nextion:091]: Nextion is not connected!
[14:00:54][W][nextion:091]: Nextion is not connected!
[14:00:54][W][nextion:091]: Nextion is not connected!
[14:00:55][W][nextion:091]: Nextion is not connected!
[14:00:55][W][nextion:091]: Nextion is not connected!
[14:00:56][D][sensor:094]: 'ntc_source': Sending state 1.64050 V with 2 decimals of accuracy
[14:00:56][D][resistance:039]: 'resistance_sensor' - Resistance 11071.8Ω
[14:00:56][D][sensor:094]: 'resistance_sensor': Sending state 11071.77051 Ω with 1 decimals of accuracy
[14:00:56][D][ntc:026]: 'Temperature' - Temperature: 22.7°C
[14:00:56][D][sensor:094]: 'Temperature': Sending state 22.72619 °C with 1 decimals of accuracy
[14:00:56][D][climate:396]: 'Thermostat' - Sending state:
[14:00:56][D][climate:399]: Mode: OFF
[14:00:56][D][climate:401]: Action: OFF
[14:00:56][D][climate:413]: Custom Preset: Off
[14:00:56][D][climate:419]: Current Temperature: 22.73°C
[14:00:56][D][climate:425]: Target Temperature: 18.00°C
[14:00:56][W][nextion:091]: Nextion is not connected!
[14:00:56][W][nextion:091]: Nextion is not connected!
[14:00:56][D][addon_upload_tft.script.report_upload_progress:158]: Set Nextion unavailable for blueprint calls
[14:00:56][D][addon_upload_tft.script.report_upload_progress:158]: Preparing for upload...
[14:00:56][D][script.nextion_status:107]: Nextion status:
[14:00:56][D][script.nextion_status:108]: Is detected: NO
[14:00:56][D][script.nextion_status:109]: Is setup: NO
[14:00:56][D][script.nextion_status:110]: Queue size: 0
[14:00:56][D][addon_upload_tft.script.upload_tft:220]: Starting the upload script
[14:00:56][D][addon_upload_tft.script.upload_tft:221]: Valid TFT: NO
[14:00:56][D][addon_upload_tft.script.upload_tft:222]: Current baud rate: 115200 bps
[14:00:56][D][addon_upload_tft.script.upload_tft:223]: Target upload baud rate: 115200 bps
[14:00:56][D][addon_upload_tft.script.upload_tft:224]: Upload URL: http://192.0.2.2/nspanel_eu.tft
[14:00:57][W][nextion:091]: Nextion is not connected!
[14:00:57][W][nextion:091]: Nextion is not connected!
[14:00:58][W][nextion:091]: Nextion is not connected!
[14:00:58][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[14:00:58][W][nextion:091]: Nextion is not connected!
[14:00:59][W][nextion:091]: Nextion is not connected!
[14:00:59][W][nextion:091]: Nextion is not connected!
[14:01:00][W][nextion:091]: Nextion is not connected!
[14:01:00][W][nextion:091]: Nextion is not connected!
[14:01:01][W][nextion:091]: Nextion is not connected!
[14:01:02][W][nextion:091]: Nextion is not connected!
[14:01:02][W][nextion:091]: Nextion is not connected!
[14:01:02][D][addon_upload_tft.script.report_upload_progress:158]: Stopping other scripts
[14:01:02][D][script.nextion_status:107]: Nextion status:
[14:01:02][D][script.nextion_status:108]: Is detected: NO
[14:01:02][D][script.nextion_status:109]: Is setup: NO
[14:01:02][D][script.nextion_status:110]: Queue size: 0
[14:01:02][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[14:01:03][W][nextion:091]: Nextion is not connected!
[14:01:03][W][nextion:091]: Nextion is not connected!
[14:01:04][W][nextion:091]: Nextion is not connected!
[14:01:04][W][nextion:091]: Nextion is not connected!
[14:01:04][D][main:403]: Attempting to upload TFT
[14:01:04][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 115200 bps
[14:01:04][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[14:01:05][W][nextion:091]: Nextion is not connected!
[14:01:05][W][nextion:091]: Nextion is not connected!
[14:01:06][W][nextion:091]: Nextion is not connected!
[14:01:06][D][sensor:094]: 'ntc_source': Sending state 1.63900 V with 2 decimals of accuracy
[14:01:06][D][resistance:039]: 'resistance_sensor' - Resistance 11051.7Ω
[14:01:06][D][sensor:094]: 'resistance_sensor': Sending state 11051.65723 Ω with 1 decimals of accuracy
[14:01:06][D][ntc:026]: 'Temperature' - Temperature: 22.8°C
[14:01:06][D][sensor:094]: 'Temperature': Sending state 22.76649 °C with 1 decimals of accuracy
[14:01:06][D][climate:396]: 'Thermostat' - Sending state:
[14:01:06][D][climate:399]: Mode: OFF
[14:01:06][D][climate:401]: Action: OFF
[14:01:06][D][climate:413]: Custom Preset: Off
[14:01:06][D][climate:419]: Current Temperature: 22.77°C
[14:01:06][D][climate:425]: Target Temperature: 18.00°C
[14:01:06][W][nextion:091]: Nextion is not connected!
[14:01:06][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[14:01:06][D][nextion.upload.idf:157]: Nextion TFT upload requested
[14:01:06][D][nextion.upload.idf:158]: Exit reparse: YES
[14:01:06][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_eu.tft
[14:01:06][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[14:01:06][D][nextion.upload.idf:188]: Baud rate: 115200
[14:01:07][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[14:01:07][E][nextion.upload.idf:358]: Nextion TFT upload failed
[14:01:07][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[14:01:07][W][component:237]: Component script took a long time for an operation (886 ms).
[14:01:07][W][component:238]: Components should block for at most 30 ms.
[14:01:07][W][nextion:091]: Nextion is not connected!
[14:01:07][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 115200 bps returned: NO
[14:01:08][W][nextion:091]: Nextion is not connected!
[14:01:08][W][nextion:091]: Nextion is not connected!
[14:01:09][W][nextion:091]: Nextion is not connected!
[14:01:09][W][nextion:091]: Nextion is not connected!
[14:01:10][W][nextion:091]: Nextion is not connected!
[14:01:11][W][nextion:091]: Nextion is not connected!
[14:01:11][D][esp32.preferences:114]: Saving 3 preferences to flash...
[14:01:11][D][esp32.preferences:143]: Saving 3 preferences to flash: 1 cached, 2 written, 0 failed
[14:01:11][W][nextion:091]: Nextion is not connected!
[14:01:11][W][nextion:091]: Nextion is not connected!
[14:01:12][W][nextion:091]: Nextion is not connected!
[14:01:12][D][main:403]: Attempting to upload TFT
[14:01:12][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #2 at 115200 bps
[14:01:12][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[14:01:12][W][nextion:091]: Nextion is not connected!
[14:01:13][W][nextion:091]: Nextion is not connected!
[14:01:14][W][nextion:091]: Nextion is not connected!
[14:01:14][W][nextion:091]: Nextion is not connected!
[14:01:14][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[14:01:14][D][nextion.upload.idf:157]: Nextion TFT upload requested
[14:01:14][D][nextion.upload.idf:158]: Exit reparse: YES
[14:01:14][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_eu.tft
[14:01:15][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[14:01:15][D][nextion.upload.idf:188]: Baud rate: 115200
[14:01:15][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[14:01:15][E][nextion.upload.idf:358]: Nextion TFT upload failed
[14:01:15][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[14:01:15][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #2 at 115200 bps returned: NO
[14:01:15][W][nextion:091]: Nextion is not connected!
[14:01:15][W][nextion:091]: Nextion is not connected!
[14:01:15][D][text_sensor:064]: 'Device Name': Sending state 'nslekrum2'
[14:01:16][W][nextion:091]: Nextion is not connected!
[14:01:16][D][sensor:094]: 'ntc_source': Sending state 1.63700 V with 2 decimals of accuracy
[14:01:16][D][resistance:039]: 'resistance_sensor' - Resistance 11024.9Ω
[14:01:16][D][sensor:094]: 'resistance_sensor': Sending state 11024.89453 Ω with 1 decimals of accuracy
[14:01:16][D][ntc:026]: 'Temperature' - Temperature: 22.8°C
[14:01:16][D][sensor:094]: 'Temperature': Sending state 22.82025 °C with 1 decimals of accuracy
[14:01:16][D][climate:396]: 'Thermostat' - Sending state:
[14:01:16][D][climate:399]: Mode: OFF
[14:01:16][D][climate:401]: Action: OFF
[14:01:16][D][climate:413]: Custom Preset: Off
[14:01:16][D][climate:419]: Current Temperature: 22.82°C
[14:01:16][D][climate:425]: Target Temperature: 18.00°C
[14:01:16][W][nextion:091]: Nextion is not connected!
[14:01:17][W][nextion:091]: Nextion is not connected!
[14:01:17][W][nextion:091]: Nextion is not connected!
[14:01:18][W][nextion:091]: Nextion is not connected!
[14:01:18][W][nextion:091]: Nextion is not connected!
[14:01:19][W][nextion:091]: Nextion is not connected!
[14:01:19][W][nextion:091]: Nextion is not connected!
[14:01:20][D][addon_upload_tft.script.report_upload_progress:158]: Restarting Nextion display
[14:01:20][D][switch:016]: 'Nextion display - Power' Turning OFF.
[14:01:20][D][switch:055]: 'Nextion display - Power': Sending state OFF
[14:01:20][W][nextion:091]: Nextion is not connected!
[14:01:20][W][nextion:091]: Nextion is not connected!
[14:01:21][W][nextion:091]: Nextion is not connected!
[14:01:21][W][nextion:091]: Nextion is not connected!
[14:01:22][D][switch:012]: 'Nextion display - Power' Turning ON.
[14:01:22][D][switch:055]: 'Nextion display - Power': Sending state ON
[14:01:22][W][nextion:091]: Nextion is not connected!
[14:01:22][W][nextion:091]: Nextion is not connected!
[14:01:23][W][nextion:091]: Nextion is not connected!
[14:01:23][W][nextion:091]: Nextion is not connected!
[14:01:24][W][nextion:091]: Nextion is not connected!
[14:01:24][W][nextion:091]: Nextion is not connected!
[14:01:25][W][nextion:091]: Nextion is not connected!
[14:01:25][W][nextion:091]: Nextion is not connected!
[14:01:26][D][sensor:094]: 'ntc_source': Sending state 1.63667 V with 2 decimals of accuracy
[14:01:26][D][resistance:039]: 'resistance_sensor' - Resistance 11020.4Ω
[14:01:26][D][sensor:094]: 'resistance_sensor': Sending state 11020.44141 Ω with 1 decimals of accuracy
[14:01:26][D][ntc:026]: 'Temperature' - Temperature: 22.8°C
[14:01:26][D][sensor:094]: 'Temperature': Sending state 22.82921 °C with 1 decimals of accuracy
[14:01:26][D][climate:396]: 'Thermostat' - Sending state:
[14:01:26][D][climate:399]: Mode: OFF
[14:01:26][D][climate:401]: Action: OFF
[14:01:26][D][climate:413]: Custom Preset: Off
[14:01:26][D][climate:419]: Current Temperature: 22.83°C
[14:01:26][D][climate:425]: Target Temperature: 18.00°C
[14:01:26][W][nextion:091]: Nextion is not connected!
[14:01:26][W][nextion:091]: Nextion is not connected!
[14:01:27][D][script.nextion_status:107]: Nextion status:
[14:01:27][D][script.nextion_status:108]: Is detected: NO
[14:01:27][D][script.nextion_status:109]: Is setup: NO
[14:01:27][D][script.nextion_status:110]: Queue size: 0
[14:01:27][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[14:01:27][W][nextion:091]: Nextion is not connected!
[14:01:27][W][nextion:091]: Nextion is not connected!
[14:01:28][W][nextion:091]: Nextion is not connected!
[14:01:28][W][nextion:091]: Nextion is not connected!
[14:01:29][D][main:403]: Attempting to upload TFT
[14:01:29][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #3 at 115200 bps
[14:01:29][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[14:01:29][W][nextion:091]: Nextion is not connected!
[14:01:30][W][nextion:091]: Nextion is not connected!
[14:01:30][W][nextion:091]: Nextion is not connected!
[14:01:31][W][nextion:091]: Nextion is not connected!
[14:01:31][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[14:01:31][D][nextion.upload.idf:157]: Nextion TFT upload requested
[14:01:31][D][nextion.upload.idf:158]: Exit reparse: YES
[14:01:31][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_eu.tft
[14:01:31][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[14:01:31][D][nextion.upload.idf:188]: Baud rate: 115200
[14:01:31][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[14:01:31][E][nextion.upload.idf:358]: Nextion TFT upload failed
[14:01:31][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[14:01:31][W][component:237]: Component script took a long time for an operation (619 ms).
[14:01:31][W][component:238]: Components should block for at most 30 ms.
[14:01:31][W][nextion:091]: Nextion is not connected!
[14:01:31][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #3 at 115200 bps returned: NO
[14:01:31][D][sensor:094]: 'RSSI': Sending state -34.00000 dBm with 0 decimals of accuracy
[14:01:32][W][nextion:091]: Nextion is not connected!
[14:01:32][W][nextion:091]: Nextion is not connected!
[14:01:33][W][nextion:091]: Nextion is not connected!
[14:01:33][W][nextion:091]: Nextion is not connected!
[14:01:34][W][nextion:091]: Nextion is not connected!
[14:01:34][W][nextion:091]: Nextion is not connected!
[14:01:35][W][nextion:091]: Nextion is not connected!
[14:01:35][W][nextion:091]: Nextion is not connected!
[14:01:36][D][sensor:094]: 'ntc_source': Sending state 1.63733 V with 2 decimals of accuracy
[14:01:36][D][resistance:039]: 'resistance_sensor' - Resistance 11029.3Ω
[14:01:36][D][sensor:094]: 'resistance_sensor': Sending state 11029.34961 Ω with 1 decimals of accuracy
[14:01:36][D][ntc:026]: 'Temperature' - Temperature: 22.8°C
[14:01:36][D][sensor:094]: 'Temperature': Sending state 22.81129 °C with 1 decimals of accuracy
[14:01:36][D][climate:396]: 'Thermostat' - Sending state:
[14:01:36][D][climate:399]: Mode: OFF
[14:01:36][D][climate:401]: Action: OFF
[14:01:36][D][climate:413]: Custom Preset: Off
[14:01:36][D][climate:419]: Current Temperature: 22.81°C
[14:01:36][D][climate:425]: Target Temperature: 18.00°C
[14:01:36][W][nextion:091]: Nextion is not connected!
[14:01:36][D][main:403]: Attempting to upload TFT
[14:01:36][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #4 at 115200 bps
[14:01:36][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[14:01:36][W][nextion:091]: Nextion is not connected!
[14:01:37][W][nextion:091]: Nextion is not connected!
[14:01:37][W][nextion:091]: Nextion is not connected!
[14:01:38][W][nextion:091]: Nextion is not connected!
[14:01:38][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[14:01:38][D][nextion.upload.idf:157]: Nextion TFT upload requested
[14:01:38][D][nextion.upload.idf:158]: Exit reparse: YES
[14:01:38][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_eu.tft
[14:01:38][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[14:01:38][D][nextion.upload.idf:188]: Baud rate: 115200
[14:01:38][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[14:01:38][E][nextion.upload.idf:358]: Nextion TFT upload failed
[14:01:38][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[14:01:38][W][component:237]: Component script took a long time for an operation (73 ms).
[14:01:38][W][component:238]: Components should block for at most 30 ms.
[14:01:38][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #4 at 115200 bps returned: NO
[14:01:38][W][nextion:091]: Nextion is not connected!
[14:01:39][W][nextion:091]: Nextion is not connected!
[14:01:39][W][nextion:091]: Nextion is not connected!
[14:01:40][W][nextion:091]: Nextion is not connected!
[14:01:41][W][nextion:091]: Nextion is not connected!
[14:01:41][W][nextion:091]: Nextion is not connected!
[14:01:42][W][nextion:091]: Nextion is not connected!
[14:01:42][W][nextion:091]: Nextion is not connected!
[14:01:43][W][nextion:091]: Nextion is not connected!
[14:01:43][W][nextion:091]: Nextion is not connected!
[14:01:43][D][addon_upload_tft.script.report_upload_progress:158]: TFT upload failed
[14:01:43][D][addon_upload_tft.script.report_upload_progress:158]: Turn off Nextion and restart ESPHome
[14:01:43][D][switch:016]: 'Nextion display - Power' Turning OFF.
[14:01:43][D][switch:055]: 'Nextion display - Power': Sending state OFF
[14:01:44][W][nextion:091]: Nextion is not connected!
[14:01:44][W][nextion:091]: Nextion is not connected!
[14:01:45][W][nextion:091]: Nextion is not connected!
[14:01:45][W][nextion:091]: Nextion is not connected!

slangpetter · 2024-11-08T13:07:13Z

Is is there any way to upload TFT-file through TTL?

edwardtfn · 2024-11-08T13:36:48Z

Is is there any way to upload TFT-file through TTL?

There is. I will find an older issue related to this and share here...
However, in your case, it looks like Nextion is in a different baud rate than 115200bps (in use by ESPHome).
What do you see in your screen? A picture could help here.
In your panel's page under Settings > Devices and Services > ESPHome, you will find settings for baud rate. When looking the logs, try to change the baud rate to lower values (9600bps, 19200bps, 57600bps... Or even 921600bps)... In the log you may see when Nextion states changes to Is_setup: yes.
Then you try to upload.

slangpetter · 2024-11-08T13:40:29Z

I´we tried them all, ;)

edwardtfn · 2024-11-08T13:48:23Z

I don't see anything in your screenshot, but anyways, I was asking about what you see on your panel's screen?

edwardtfn · 2024-11-08T13:51:32Z

Is is there any way to upload TFT-file through TTL?

Error: Model does not match-Nextion Display bricked-Solution #166

slangpetter · 2024-11-08T13:53:56Z

I don't see anything in your screenshot, but anyways, I was asking about what you see on your panel's screen?

Only "System Data ERROR!"

edwardtfn · 2024-11-08T15:12:26Z

Could you please set the baud rate to 9600bps, try to upload TFT and share logs?

slangpetter · 2024-11-08T15:30:40Z

When trying from Github:

[16:27:20][D][button:010]: 'Update TFT display' Pressed.
[16:27:20][W][nextion:091]: Nextion is not connected!
[16:27:21][W][nextion:091]: Nextion is not connected!
[16:27:21][W][nextion:091]: Nextion is not connected!
[16:27:22][W][nextion:091]: Nextion is not connected!
[16:27:22][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[16:27:22][W][nextion:091]: Nextion is not connected!
[16:27:23][W][nextion:091]: Nextion is not connected!
[16:27:23][W][nextion:091]: Nextion is not connected!
[16:27:24][D][sensor:094]: 'ntc_source': Sending state 1.58317 V with 2 decimals of accuracy
[16:27:24][D][resistance:039]: 'resistance_sensor' - Resistance 10328.0Ω
[16:27:24][D][sensor:094]: 'resistance_sensor': Sending state 10328.00684 Ω with 1 decimals of accuracy
[16:27:24][D][ntc:026]: 'Temperature' - Temperature: 24.3°C
[16:27:24][D][sensor:094]: 'Temperature': Sending state 24.27544 °C with 1 decimals of accuracy
[16:27:24][D][climate:396]: 'Thermostat' - Sending state:
[16:27:24][D][climate:399]: Mode: OFF
[16:27:24][D][climate:401]: Action: OFF
[16:27:24][D][climate:419]: Current Temperature: 24.28°C
[16:27:24][D][climate:425]: Target Temperature: 18.00°C
[16:27:24][W][nextion:091]: Nextion is not connected!
[16:27:24][W][nextion:091]: Nextion is not connected!
[16:27:25][W][nextion:091]: Nextion is not connected!
[16:27:25][W][nextion:091]: Nextion is not connected!
[16:27:26][W][nextion:091]: Nextion is not connected!
[16:27:26][D][addon_upload_tft.script.report_upload_progress:158]: Set Nextion unavailable for blueprint calls
[16:27:26][D][addon_upload_tft.script.report_upload_progress:158]: Preparing for upload...
[16:27:26][D][script.nextion_status:107]: Nextion status:
[16:27:26][D][script.nextion_status:108]: Is detected: NO
[16:27:26][D][script.nextion_status:109]: Is setup: NO
[16:27:26][D][script.nextion_status:110]: Queue size: 0
[16:27:26][D][addon_upload_tft.script.upload_tft:220]: Starting the upload script
[16:27:26][D][addon_upload_tft.script.upload_tft:221]: Valid TFT: NO
[16:27:26][D][addon_upload_tft.script.upload_tft:222]: Current baud rate: 115200 bps
[16:27:26][D][addon_upload_tft.script.upload_tft:223]: Target upload baud rate: 9600 bps
[16:27:26][D][addon_upload_tft.script.upload_tft:224]: Upload URL: http://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
[16:27:26][W][nextion:091]: Nextion is not connected!
[16:27:27][W][nextion:091]: Nextion is not connected!
[16:27:28][W][nextion:091]: Nextion is not connected!
[16:27:28][W][nextion:091]: Nextion is not connected!
[16:27:28][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[16:27:29][W][nextion:091]: Nextion is not connected!
[16:27:29][W][nextion:091]: Nextion is not connected!
[16:27:30][W][nextion:091]: Nextion is not connected!
[16:27:30][D][esp32.preferences:114]: Saving 1 preferences to flash...
[16:27:30][D][esp32.preferences:143]: Saving 1 preferences to flash: 1 cached, 0 written, 0 failed
[16:27:30][W][nextion:091]: Nextion is not connected!
[16:27:31][W][nextion:091]: Nextion is not connected!
[16:27:31][W][nextion:091]: Nextion is not connected!
[16:27:32][W][nextion:091]: Nextion is not connected!
[16:27:32][W][nextion:091]: Nextion is not connected!
[16:27:32][D][addon_upload_tft.script.report_upload_progress:158]: Stopping other scripts
[16:27:32][D][script.nextion_status:107]: Nextion status:
[16:27:32][D][script.nextion_status:108]: Is detected: NO
[16:27:32][D][script.nextion_status:109]: Is setup: NO
[16:27:32][D][script.nextion_status:110]: Queue size: 0
[16:27:32][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[16:27:32][D][script.set_baud_rate:3022]: Baud rate changing from 115200 to 9600 bps
[16:27:32][D][script.set_baud_rate:3023]: Flush UART
[16:27:32][D][script.set_baud_rate:3029]: Sending instruction 'baud=9600' to Nextion
[16:27:32][D][script.set_baud_rate:3031]: Flush UART
[16:27:32][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 9600 bps
[16:27:32][C][uart.idf:153]: UART 0 was reloaded.
[16:27:32][C][uart.idf:159]: UART Bus 0:
[16:27:32][C][uart.idf:160]: TX Pin: GPIO16
[16:27:32][C][uart.idf:161]: RX Pin: GPIO17
[16:27:32][C][uart.idf:163]: RX Buffer Size: 256
[16:27:32][C][uart.idf:165]: Baud Rate: 9600 baud
[16:27:33][W][nextion:091]: Nextion is not connected!
[16:27:33][W][nextion:091]: Nextion is not connected!
[16:27:34][D][sensor:094]: 'ntc_source': Sending state 1.58383 V with 2 decimals of accuracy
[16:27:34][D][resistance:039]: 'resistance_sensor' - Resistance 10336.4Ω
[16:27:34][D][sensor:094]: 'resistance_sensor': Sending state 10336.37012 Ω with 1 decimals of accuracy
[16:27:34][D][ntc:026]: 'Temperature' - Temperature: 24.3°C
[16:27:34][D][sensor:094]: 'Temperature': Sending state 24.25731 °C with 1 decimals of accuracy
[16:27:34][D][climate:396]: 'Thermostat' - Sending state:
[16:27:34][D][climate:399]: Mode: OFF
[16:27:34][D][climate:401]: Action: OFF
[16:27:34][D][climate:419]: Current Temperature: 24.26°C
[16:27:34][D][climate:425]: Target Temperature: 18.00°C
[16:27:34][W][nextion:091]: Nextion is not connected!
[16:27:34][W][nextion:091]: Nextion is not connected!
[16:27:34][D][main:403]: Attempting to upload TFT
[16:27:34][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 9600 bps
[16:27:34][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:27:35][W][nextion:091]: Nextion is not connected!
[16:27:35][W][nextion:091]: Nextion is not connected!
[16:27:36][W][nextion:091]: Nextion is not connected!
[16:27:36][W][nextion:091]: Nextion is not connected!
[16:27:36][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:27:36][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:27:36][D][nextion.upload.idf:158]: Exit reparse: YES
[16:27:36][D][nextion.upload.idf:159]: URL: http://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
[16:27:36][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:27:36][D][nextion.upload.idf:188]: Baud rate: 9600
[16:27:38][D][nextion.upload.idf:235]: TFT file size: 4294967295 bytes
[16:27:38][E][nextion.upload.idf:237]: File size check failed.
[16:27:38][D][nextion.upload.idf:238]: Close HTTP connection
[16:27:38][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:27:38][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:27:38][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:27:38][W][component:237]: Component script took a long time for an operation (1833 ms).
[16:27:38][W][component:238]: Components should block for at most 30 ms.
[16:27:38][W][nextion:091]: Nextion is not connected!
[16:27:38][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 9600 bps returned: NO
[16:27:39][W][nextion:091]: Nextion is not connected!
[16:27:39][W][nextion:091]: Nextion is not connected!
[16:27:40][W][nextion:091]: Nextion is not connected!
[16:27:40][W][nextion:091]: Nextion is not connected!
[16:27:41][W][nextion:091]: Nextion is not connected!
[16:27:41][W][nextion:091]: Nextion is not connected!
[16:27:42][W][nextion:091]: Nextion is not connected!
[16:27:42][W][nextion:091]: Nextion is not connected!
[16:27:43][W][nextion:091]: Nextion is not connected!
[16:27:43][D][main:403]: Attempting to upload TFT
[16:27:43][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #2 at 9600 bps
[16:27:43][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:27:43][W][nextion:091]: Nextion is not connected!
[16:27:44][D][sensor:094]: 'ntc_source': Sending state 1.58383 V with 2 decimals of accuracy
[16:27:44][D][resistance:039]: 'resistance_sensor' - Resistance 10336.4Ω
[16:27:44][D][sensor:094]: 'resistance_sensor': Sending state 10336.37012 Ω with 1 decimals of accuracy
[16:27:44][D][ntc:026]: 'Temperature' - Temperature: 24.3°C
[16:27:44][D][sensor:094]: 'Temperature': Sending state 24.25731 °C with 1 decimals of accuracy
[16:27:44][D][climate:396]: 'Thermostat' - Sending state:
[16:27:44][D][climate:399]: Mode: OFF
[16:27:44][D][climate:401]: Action: OFF
[16:27:44][D][climate:419]: Current Temperature: 24.26°C
[16:27:44][D][climate:425]: Target Temperature: 18.00°C
[16:27:44][W][nextion:091]: Nextion is not connected!
[16:27:44][W][nextion:091]: Nextion is not connected!
[16:27:45][W][nextion:091]: Nextion is not connected!
[16:27:45][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:27:45][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:27:45][D][nextion.upload.idf:158]: Exit reparse: YES
[16:27:45][D][nextion.upload.idf:159]: URL: http://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
[16:27:45][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:27:45][D][nextion.upload.idf:188]: Baud rate: 9600
[16:27:46][D][nextion.upload.idf:235]: TFT file size: 4294967295 bytes
[16:27:46][E][nextion.upload.idf:237]: File size check failed.
[16:27:46][D][nextion.upload.idf:238]: Close HTTP connection
[16:27:46][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:27:46][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:27:46][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:27:46][W][component:237]: Component script took a long time for an operation (1288 ms).
[16:27:46][W][component:238]: Components should block for at most 30 ms.
[16:27:47][W][nextion:091]: Nextion is not connected!
[16:27:47][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #2 at 9600 bps returned: NO
[16:27:47][W][nextion:091]: Nextion is not connected!
[16:27:48][W][nextion:091]: Nextion is not connected!
[16:27:48][W][nextion:091]: Nextion is not connected!
[16:27:49][W][nextion:091]: Nextion is not connected!
[16:27:49][W][nextion:091]: Nextion is not connected!
[16:27:50][W][nextion:091]: Nextion is not connected!
[16:27:50][W][nextion:091]: Nextion is not connected!
[16:27:51][W][nextion:091]: Nextion is not connected!
[16:27:51][W][nextion:091]: Nextion is not connected!
[16:27:52][D][script.nextion_status:107]: Nextion status:
[16:27:52][D][script.nextion_status:108]: Is detected: NO
[16:27:52][D][script.nextion_status:109]: Is setup: NO
[16:27:52][D][script.nextion_status:110]: Queue size: 0
[16:27:52][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[16:27:52][D][script.set_baud_rate:3022]: Baud rate changing from 9600 to 115200 bps
[16:27:52][D][script.set_baud_rate:3023]: Flush UART
[16:27:52][D][script.set_baud_rate:3029]: Sending instruction 'baud=115200' to Nextion
[16:27:52][D][script.set_baud_rate:3031]: Flush UART
[16:27:52][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 115200 bps
[16:27:52][C][uart.idf:153]: UART 0 was reloaded.
[16:27:52][C][uart.idf:159]: UART Bus 0:
[16:27:52][C][uart.idf:160]: TX Pin: GPIO16
[16:27:52][C][uart.idf:161]: RX Pin: GPIO17
[16:27:52][C][uart.idf:163]: RX Buffer Size: 256
[16:27:52][C][uart.idf:165]: Baud Rate: 115200 baud
[16:27:52][C][uart.idf:166]: Data Bits: 8
[16:27:52][C][uart.idf:167]: Parity: NONE
[16:27:52][C][uart.idf:168]: Stop bits: 1
[16:27:52][D][script.set_baud_rate:3040]: Current baud rate: 115200 bps
[16:27:52][W][nextion:091]: Nextion is not connected!
[16:27:52][W][nextion:091]: Nextion is not connected!
[16:27:53][W][nextion:091]: Nextion is not connected!
[16:27:53][W][nextion:091]: Nextion is not connected!
[16:27:54][D][main:403]: Attempting to upload TFT
[16:27:54][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #3 at 115200 bps
[16:27:54][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:27:54][D][sensor:094]: 'ntc_source': Sending state 1.58450 V with 2 decimals of accuracy
[16:27:54][D][resistance:039]: 'resistance_sensor' - Resistance 10344.7Ω
[16:27:54][D][sensor:094]: 'resistance_sensor': Sending state 10344.73828 Ω with 1 decimals of accuracy
[16:27:54][D][ntc:026]: 'Temperature' - Temperature: 24.2°C
[16:27:54][D][sensor:094]: 'Temperature': Sending state 24.23919 °C with 1 decimals of accuracy
[16:27:54][D][climate:396]: 'Thermostat' - Sending state:
[16:27:54][D][climate:399]: Mode: OFF
[16:27:54][D][climate:401]: Action: OFF
[16:27:54][D][climate:419]: Current Temperature: 24.24°C
[16:27:54][D][climate:425]: Target Temperature: 18.00°C
[16:27:54][W][nextion:091]: Nextion is not connected!
[16:27:54][W][nextion:091]: Nextion is not connected!
[16:27:55][W][nextion:091]: Nextion is not connected!
[16:27:55][W][nextion:091]: Nextion is not connected!
[16:27:56][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:27:56][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:27:56][D][nextion.upload.idf:158]: Exit reparse: YES
[16:27:56][D][nextion.upload.idf:159]: URL: http://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
[16:27:56][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:27:56][D][nextion.upload.idf:188]: Baud rate: 115200
[16:27:57][D][nextion.upload.idf:235]: TFT file size: 4294967295 bytes
[16:27:57][E][nextion.upload.idf:237]: File size check failed.
[16:27:57][D][nextion.upload.idf:238]: Close HTTP connection
[16:27:57][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:27:57][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:27:57][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:27:57][W][component:237]: Component script took a long time for an operation (1381 ms).
[16:27:57][W][component:238]: Components should block for at most 30 ms.
[16:27:57][W][nextion:091]: Nextion is not connected!
[16:27:57][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #3 at 115200 bps returned: NO
[16:27:57][W][nextion:091]: Nextion is not connected!
[16:27:58][W][nextion:091]: Nextion is not connected!
[16:27:59][W][nextion:091]: Nextion is not connected!
[16:27:59][W][nextion:091]: Nextion is not connected!
[16:28:00][W][nextion:091]: Nextion is not connected!
[16:28:00][W][nextion:091]: Nextion is not connected!
[16:28:01][W][nextion:091]: Nextion is not connected!
[16:28:01][W][nextion:091]: Nextion is not connected!
[16:28:02][W][nextion:091]: Nextion is not connected!
[16:28:02][D][main:403]: Attempting to upload TFT
[16:28:02][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #4 at 115200 bps
[16:28:02][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:28:02][W][nextion:091]: Nextion is not connected!
[16:28:03][W][nextion:091]: Nextion is not connected!
[16:28:03][W][nextion:091]: Nextion is not connected!
[16:28:04][D][sensor:094]: 'ntc_source': Sending state 1.58417 V with 2 decimals of accuracy
[16:28:04][D][resistance:039]: 'resistance_sensor' - Resistance 10340.6Ω
[16:28:04][D][sensor:094]: 'resistance_sensor': Sending state 10340.55371 Ω with 1 decimals of accuracy
[16:28:04][D][ntc:026]: 'Temperature' - Temperature: 24.2°C
[16:28:04][D][sensor:094]: 'Temperature': Sending state 24.24825 °C with 1 decimals of accuracy
[16:28:04][D][climate:396]: 'Thermostat' - Sending state:
[16:28:04][D][climate:399]: Mode: OFF
[16:28:04][D][climate:401]: Action: OFF
[16:28:04][D][climate:419]: Current Temperature: 24.25°C
[16:28:04][D][climate:425]: Target Temperature: 18.00°C
[16:28:04][W][nextion:091]: Nextion is not connected!
[16:28:04][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:28:04][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:28:04][D][nextion.upload.idf:158]: Exit reparse: YES
[16:28:04][D][nextion.upload.idf:159]: URL: http://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
[16:28:04][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:28:04][D][nextion.upload.idf:188]: Baud rate: 115200
[16:28:05][D][nextion.upload.idf:235]: TFT file size: 4294967295 bytes
[16:28:05][E][nextion.upload.idf:237]: File size check failed.
[16:28:05][D][nextion.upload.idf:238]: Close HTTP connection
[16:28:05][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:28:05][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:28:05][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:28:05][W][component:237]: Component script took a long time for an operation (1265 ms).
[16:28:05][W][component:238]: Components should block for at most 30 ms.
[16:28:05][W][nextion:091]: Nextion is not connected!
[16:28:05][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #4 at 115200 bps returned: NO
[16:28:06][W][nextion:091]: Nextion is not connected!
[16:28:06][W][nextion:091]: Nextion is not connected!
[16:28:07][W][nextion:091]: Nextion is not connected!
[16:28:07][W][nextion:091]: Nextion is not connected!
[16:28:08][W][nextion:091]: Nextion is not connected!
[16:28:08][W][nextion:091]: Nextion is not connected!
[16:28:09][W][nextion:091]: Nextion is not connected!
[16:28:09][W][nextion:091]: Nextion is not connected!
[16:28:10][W][nextion:091]: Nextion is not connected!
[16:28:10][D][addon_upload_tft.script.report_upload_progress:158]: Restarting Nextion display
[16:28:10][D][switch:016]: 'Nextion display - Power' Turning OFF.
[16:28:10][D][switch:055]: 'Nextion display - Power': Sending state OFF
[16:28:10][W][nextion:091]: Nextion is not connected!
[16:28:11][W][nextion:091]: Nextion is not connected!
[16:28:11][W][nextion:091]: Nextion is not connected!
[16:28:12][W][nextion:091]: Nextion is not connected!
[16:28:12][D][switch:012]: 'Nextion display - Power' Turning ON.
[16:28:12][D][switch:055]: 'Nextion display - Power': Sending state ON
[16:28:12][W][nextion:091]: Nextion is not connected!
[16:28:13][W][nextion:091]: Nextion is not connected!
[16:28:13][W][nextion:091]: Nextion is not connected!
[16:28:14][D][sensor:094]: 'ntc_source': Sending state 1.58450 V with 2 decimals of accuracy
[16:28:14][D][resistance:039]: 'resistance_sensor' - Resistance 10344.7Ω
[16:28:14][D][sensor:094]: 'resistance_sensor': Sending state 10344.73828 Ω with 1 decimals of accuracy
[16:28:14][D][ntc:026]: 'Temperature' - Temperature: 24.2°C
[16:28:14][D][sensor:094]: 'Temperature': Sending state 24.23919 °C with 1 decimals of accuracy
[16:28:14][D][climate:396]: 'Thermostat' - Sending state:
[16:28:14][D][climate:399]: Mode: OFF
[16:28:14][D][climate:401]: Action: OFF
[16:28:14][D][climate:419]: Current Temperature: 24.24°C
[16:28:14][D][climate:425]: Target Temperature: 18.00°C
[16:28:14][W][nextion:091]: Nextion is not connected!
[16:28:15][W][nextion:091]: Nextion is not connected!
[16:28:15][D][sensor:094]: 'RSSI': Sending state -35.00000 dBm with 0 decimals of accuracy
[16:28:15][W][nextion:091]: Nextion is not connected!
[16:28:16][W][nextion:091]: Nextion is not connected!
[16:28:16][W][nextion:091]: Nextion is not connected!
[16:28:17][W][nextion:091]: Nextion is not connected!
[16:28:17][W][nextion:091]: Nextion is not connected!
[16:28:17][D][script.nextion_status:107]: Nextion status:
[16:28:17][D][script.nextion_status:108]: Is detected: NO
[16:28:17][D][script.nextion_status:109]: Is setup: NO
[16:28:17][D][script.nextion_status:110]: Queue size: 0
[16:28:17][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[16:28:18][W][nextion:091]: Nextion is not connected!
[16:28:18][W][nextion:091]: Nextion is not connected!
[16:28:19][W][nextion:091]: Nextion is not connected!
[16:28:19][W][nextion:091]: Nextion is not connected!
[16:28:19][D][main:403]: Attempting to upload TFT
[16:28:19][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #5 at 115200 bps
[16:28:19][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:28:20][W][nextion:091]: Nextion is not connected!
[16:28:20][W][nextion:091]: Nextion is not connected!
[16:28:20][D][text_sensor:064]: 'Device Name': Sending state 'nslekrum2'
[16:28:21][W][nextion:091]: Nextion is not connected!
[16:28:21][W][nextion:091]: Nextion is not connected!
[16:28:21][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:28:21][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:28:21][D][nextion.upload.idf:158]: Exit reparse: YES
[16:28:21][D][nextion.upload.idf:159]: URL: http://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
[16:28:21][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:28:21][D][nextion.upload.idf:188]: Baud rate: 115200
[16:28:23][D][nextion.upload.idf:235]: TFT file size: 4294967295 bytes
[16:28:23][E][nextion.upload.idf:237]: File size check failed.
[16:28:23][D][nextion.upload.idf:238]: Close HTTP connection
[16:28:23][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:28:23][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:28:23][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:28:23][W][component:237]: Component script took a long time for an operation (1729 ms).
[16:28:23][W][component:238]: Components should block for at most 30 ms.
[16:28:23][W][nextion:091]: Nextion is not connected!
[16:28:23][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #5 at 115200 bps returned: NO
[16:28:24][W][nextion:091]: Nextion is not connected!
[16:28:24][D][sensor:094]: 'ntc_source': Sending state 1.58333 V with 2 decimals of accuracy
[16:28:24][D][resistance:039]: 'resistance_sensor' - Resistance 10330.1Ω
[16:28:24][D][sensor:094]: 'resistance_sensor': Sending state 10330.09766 Ω with 1 decimals of accuracy
[16:28:24][D][ntc:026]: 'Temperature' - Temperature: 24.3°C
[16:28:24][D][sensor:094]: 'Temperature': Sending state 24.27091 °C with 1 decimals of accuracy
[16:28:24][D][climate:396]: 'Thermostat' - Sending state:
[16:28:24][D][climate:399]: Mode: OFF
[16:28:24][D][climate:401]: Action: OFF
[16:28:24][D][climate:419]: Current Temperature: 24.27°C
[16:28:24][D][climate:425]: Target Temperature: 18.00°C
[16:28:24][W][nextion:091]: Nextion is not connected!
[16:28:25][W][nextion:091]: Nextion is not connected!
[16:28:25][W][nextion:091]: Nextion is not connected!
[16:28:26][W][nextion:091]: Nextion is not connected!
[16:28:26][W][nextion:091]: Nextion is not connected!
[16:28:27][W][nextion:091]: Nextion is not connected!
[16:28:27][W][nextion:091]: Nextion is not connected!
[16:28:28][W][nextion:091]: Nextion is not connected!
[16:28:28][D][main:403]: Attempting to upload TFT
[16:28:28][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #6 at 115200 bps
[16:28:28][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:28:28][W][nextion:091]: Nextion is not connected!
[16:28:29][W][nextion:091]: Nextion is not connected!
[16:28:29][W][nextion:091]: Nextion is not connected!
[16:28:30][D][esp32.preferences:114]: Saving 1 preferences to flash...
[16:28:30][D][esp32.preferences:143]: Saving 1 preferences to flash: 1 cached, 0 written, 0 failed
[16:28:30][W][nextion:091]: Nextion is not connected!
[16:28:30][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:28:30][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:28:30][D][nextion.upload.idf:158]: Exit reparse: YES
[16:28:30][D][nextion.upload.idf:159]: URL: http://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft
[16:28:30][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:28:30][D][nextion.upload.idf:188]: Baud rate: 115200
[16:28:31][D][nextion.upload.idf:235]: TFT file size: 4294967295 bytes
[16:28:31][E][nextion.upload.idf:237]: File size check failed.
[16:28:31][D][nextion.upload.idf:238]: Close HTTP connection
[16:28:31][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:28:31][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:28:31][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:28:31][W][component:237]: Component script took a long time for an operation (1336 ms).
[16:28:31][W][component:238]: Components should block for at most 30 ms.
[16:28:31][W][nextion:091]: Nextion is not connected!
[16:28:31][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #6 at 115200 bps returned: NO
[16:28:32][W][nextion:091]: Nextion is not connected!
[16:28:32][W][nextion:091]: Nextion is not connected!
[16:28:33][W][nextion:091]: Nextion is not connected!
[16:28:33][W][nextion:091]: Nextion is not connected!
[16:28:34][D][sensor:094]: 'ntc_source': Sending state 1.58283 V with 2 decimals of accuracy
[16:28:34][D][resistance:039]: 'resistance_sensor' - Resistance 10323.8Ω
[16:28:34][D][sensor:094]: 'resistance_sensor': Sending state 10323.82812 Ω with 1 decimals of accuracy
[16:28:34][D][ntc:026]: 'Temperature' - Temperature: 24.3°C
[16:28:34][D][sensor:094]: 'Temperature': Sending state 24.28450 °C with 1 decimals of accuracy
[16:28:34][D][climate:396]: 'Thermostat' - Sending state:
[16:28:34][D][climate:399]: Mode: OFF
[16:28:34][D][climate:401]: Action: OFF
[16:28:34][D][climate:419]: Current Temperature: 24.28°C
[16:28:34][D][climate:425]: Target Temperature: 18.00°C
[16:28:34][W][nextion:091]: Nextion is not connected!
[16:28:34][W][nextion:091]: Nextion is not connected!
[16:28:35][W][nextion:091]: Nextion is not connected!
[16:28:36][W][nextion:091]: Nextion is not connected!
[16:28:36][W][nextion:091]: Nextion is not connected!
[16:28:36][D][addon_upload_tft.script.report_upload_progress:158]: TFT upload failed
[16:28:36][D][addon_upload_tft.script.report_upload_progress:158]: Turn off Nextion and restart ESPHome
[16:28:36][D][switch:016]: 'Nextion display - Power' Turning OFF.
[16:28:36][D][switch:055]: 'Nextion display - Power': Sending state OFF
[16:28:37][W][nextion:091]: Nextion is not connected!
[16:28:37][W][nextion:091]: Nextion is not connected!
[16:28:38][W][nextion:091]: Nextion is not connected!
[16:28:38][W][nextion:091]: Nextion is not connected!
WARNING nslekrum2 @ 192.0.2.150: Connection error occurred: [Errno 104] Connection reset by peer
INFO Processing unexpected disconnect from ESPHome API for nslekrum2 @ 192.0.2.150
WARNING Disconnected from API
INFO Successfully connected to nslekrum2 @ 192.0.2.150 in 0.007s
INFO Successful handshake with nslekrum2 @ 192.0.2.150 in 0.094s
[16:29:12][W][nextion:091]: Nextion is not connected!
[16:29:12][W][nextion:091]: Nextion is not connected!
[16:29:13][W][nextion:091]: Nextion is not connected!
[16:29:13][W][nextion:091]: Nextion is not connected!
[16:29:14][W][nextion:091]: Nextion is not connected!
[16:29:14][W][nextion:091]: Nextion is not connected!
[16:29:15][W][nextion:091]: Nextion is not connected!
[16:29:15][D][esp32.preferences:114]: Saving 1 preferences to flash...
[16:29:15][D][esp32.preferences:143]: Saving 1 preferences to flash: 1 cached, 0 written, 0 failed
[16:29:15][W][nextion:091]: Nextion is not connected!
[16:29:16][W][nextion:091]: Nextion is not connected!
[16:29:16][W][nextion:091]: Nextion is not connected!
[16:29:17][W][nextion:091]: Nextion is not connected!
[16:29:17][W][nextion:091]: Nextion is not connected!
[16:29:18][W][nextion:091]: Nextion is not connected!
[16:29:18][W][nextion:091]: Nextion is not connected!
[16:29:19][W][nextion:091]: Nextion is not connected!
[16:29:19][D][sensor:094]: 'ntc_source': Sending state 1.58440 V with 2 decimals of accuracy
[16:29:19][D][resistance:039]: 'resistance_sensor' - Resistance 10343.5Ω
[16:29:19][D][sensor:094]: 'resistance_sensor': Sending state 10343.48340 Ω with 1 decimals of accuracy
[16:29:19][D][ntc:026]: 'Temperature' - Temperature: 24.2°C
[16:29:19][D][sensor:094]: 'Temperature': Sending state 24.24191 °C with 1 decimals of accuracy
[16:29:19][D][climate:396]: 'Thermostat' - Sending state:
[16:29:19][D][climate:399]: Mode: OFF
[16:29:19][D][climate:401]: Action: OFF
[16:29:19][D][climate:419]: Current Temperature: 24.24°C
[16:29:19][D][climate:425]: Target Temperature: 18.00°C
[16:29:19][W][nextion:091]: Nextion is not connected!
[16:29:20][W][nextion:091]: Nextion is not connected!
[16:29:20][W][nextion:091]: Nextion is not connected!
[16:29:21][W][nextion:091]: Nextion is not connected!
[16:29:21][W][nextion:091]: Nextion is not connected!
[16:29:21][C][nspanel_ha_blueprint:2224]: Wi-Fi: Excellent (-36 dBm)
[16:29:21][C][nspanel_ha_blueprint:2235]: API: Connected
[16:29:21][C][nspanel_ha_blueprint:2243]: Blueprint:
[16:29:21][W][nspanel_ha_blueprint:2248]: Init steps: 0 (0.0%)
[16:29:21][W][nspanel_ha_blueprint:2249]: State: Pending
[16:29:21][C][nspanel_ha_blueprint:2250]: Requesting blueprint settings
[16:29:21][D][script:077]: Script 'boot_event' restarting (mode: restart)
[16:29:21][C][nspanel_ha_blueprint:2255]: ESPHome:
[16:29:21][C][nspanel_ha_blueprint:2256]: Version: 4.3.12
[16:29:21][C][nspanel_ha_blueprint:2257]: Compiler: 2024.10.3
[16:29:21][C][nspanel_ha_blueprint:2262]: Framework: ESP-IDF
[16:29:21][C][nspanel_ha_blueprint:2267]: Free heap:
[16:29:21][C][nspanel_ha_blueprint:2271]: Internal: 201744 bytes (57.4%)
[16:29:21][C][nspanel_ha_blueprint:2281]: PSRAM: 2018255 bytes (96.8%)
[16:29:21][C][nspanel_ha_blueprint:2288]: UART:
[16:29:21][C][nspanel_ha_blueprint:2289]: Baud rate: 115200 bps
[16:29:21][C][nspanel_ha_blueprint:2290]: Queue size: 0
[16:29:21][C][nspanel_ha_blueprint:2294]: Nextion:
[16:29:21][C][nspanel_ha_blueprint:2295]: Queue size: 0
[16:29:21][W][nspanel_ha_blueprint:2299]: Is setup: False
[16:29:21][W][nspanel_ha_blueprint:2300]: Is detected: NO
[16:29:21][W][nspanel_ha_blueprint:2306]: Init: False
[16:29:21][W][nspanel_ha_blueprint:2308]: TFT: UNKNOWN
[16:29:21][C][nspanel_ha_blueprint:2311]: Packages:
[16:29:21][C][nspanel_ha_blueprint:2313]: - Core
[16:29:21][C][nspanel_ha_blueprint:2322]: - Upload TFT
[16:29:21][C][nspanel_ha_blueprint:2325]: - Climate - Base
[16:29:21][C][nspanel_ha_blueprint:2334]: - Climate - Heat
[16:29:21][C][nspanel_ha_blueprint:097]: Add-on Upload TFT:
[16:29:21][C][nspanel_ha_blueprint:098]: File model: Use nextion_update_url
[16:29:21][C][nspanel_ha_blueprint:099]: Valid TFT: NO
[16:29:21][C][nspanel_ha_blueprint:133]: Add-on climate:
[16:29:21][C][nspanel_ha_blueprint:142]: Heat: Enabled
[16:29:21][E][nspanel_ha_blueprint:146]: Relay: 0

slangpetter · 2024-11-08T15:35:02Z

From my server:

[16:33:14][D][button:010]: 'Update TFT display' Pressed.
[16:33:14][W][nextion:091]: Nextion is not connected!
[16:33:14][D][sensor:094]: 'ntc_source': Sending state 1.57867 V with 2 decimals of accuracy
[16:33:14][D][resistance:039]: 'resistance_sensor' - Resistance 10271.7Ω
[16:33:14][D][sensor:094]: 'resistance_sensor': Sending state 10271.72754 Ω with 1 decimals of accuracy
[16:33:14][D][ntc:026]: 'Temperature' - Temperature: 24.4°C
[16:33:14][D][sensor:094]: 'Temperature': Sending state 24.39786 °C with 1 decimals of accuracy
[16:33:14][D][climate:396]: 'Thermostat' - Sending state:
[16:33:14][D][climate:399]: Mode: OFF
[16:33:14][D][climate:401]: Action: OFF
[16:33:14][D][climate:419]: Current Temperature: 24.40°C
[16:33:14][D][climate:425]: Target Temperature: 18.00°C
[16:33:14][I][script.set_timezone:3151]: Setting timezone:
[16:33:14][C][homeassistant.time:010]: Home Assistant Time:
[16:33:14][C][homeassistant.time:011]: Timezone: 'CET-1CEST,M3.5.0,M10.5.0/3'
[16:33:14][D][script.boot_log:2048]: init_page_home
[16:33:14][D][sensor:094]: 'Blueprint': Sending state 100.00000 % with 1 decimals of accuracy
[16:33:14][W][nextion:091]: Nextion is not connected!
[16:33:14][D][sensor:094]: 'Blueprint': Sending state 100.00000 % with 1 decimals of accuracy
[16:33:14][D][script.boot_log:2048]: init_page_settings
[16:33:14][D][sensor:094]: 'Blueprint': Sending state 100.00000 % with 1 decimals of accuracy
[16:33:14][D][script.boot_log:2048]: init_hardware
[16:33:14][D][sensor:094]: 'Blueprint': Sending state 100.00000 % with 1 decimals of accuracy
[16:33:14][D][script.boot_log:2048]: init_global
[16:33:14][D][script.boot_log:2048]: Global settings
[16:33:14][D][text_sensor:064]: 'Version Blueprint': Sending state '4.3.12'
[16:33:14][D][script:077]: Script 'check_versions' restarting (mode: restart)
[16:33:14][D][script:077]: Script 'check_versions' restarting (mode: restart)
[16:33:15][D][script.page_changed:2644]: New page:
[16:33:15][D][text_sensor:064]: 'Detailed Entity': Sending state ''
[16:33:15][D][script:077]: Script 'timer_page' restarting (mode: restart)
[16:33:15][D][script:077]: Script 'timer_dim' restarting (mode: restart)
[16:33:15][D][script:077]: Script 'timer_sleep' restarting (mode: restart)
[16:33:15][D][sensor:094]: 'Blueprint': Sending state 100.00000 % with 1 decimals of accuracy
[16:33:15][W][component:237]: Component api took a long time for an operation (51 ms).
[16:33:15][W][component:238]: Components should block for at most 30 ms.
[16:33:15][W][nextion:091]: Nextion is not connected!
[16:33:15][W][nextion:091]: Nextion is not connected!
[16:33:16][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[16:33:16][W][nextion:091]: Nextion is not connected!
[16:33:16][W][nextion:091]: Nextion is not connected!
[16:33:17][W][nextion:091]: Nextion is not connected!
[16:33:17][D][text_sensor:064]: 'Device Name': Sending state 'nslekrum2'
[16:33:17][W][nextion:091]: Nextion is not connected!
[16:33:18][W][nextion:091]: Nextion is not connected!
[16:33:18][W][nextion:091]: Nextion is not connected!
[16:33:19][W][nextion:091]: Nextion is not connected!
[16:33:19][W][nextion:091]: Nextion is not connected!
[16:33:20][D][addon_upload_tft.script.report_upload_progress:158]: Set Nextion unavailable for blueprint calls
[16:33:20][D][addon_upload_tft.script.report_upload_progress:158]: Preparing for upload...
[16:33:20][D][script.nextion_status:107]: Nextion status:
[16:33:20][D][script.nextion_status:108]: Is detected: NO
[16:33:20][D][script.nextion_status:109]: Is setup: NO
[16:33:20][D][script.nextion_status:110]: Queue size: 0
[16:33:20][D][addon_upload_tft.script.upload_tft:220]: Starting the upload script
[16:33:20][D][addon_upload_tft.script.upload_tft:221]: Valid TFT: NO
[16:33:20][D][addon_upload_tft.script.upload_tft:222]: Current baud rate: 115200 bps
[16:33:20][D][addon_upload_tft.script.upload_tft:223]: Target upload baud rate: 9600 bps
[16:33:20][D][addon_upload_tft.script.upload_tft:224]: Upload URL: http://192.0.2.2/nspanel_eu.tft
[16:33:20][W][nextion:091]: Nextion is not connected!
[16:33:20][W][nextion:091]: Nextion is not connected!
[16:33:21][W][nextion:091]: Nextion is not connected!
[16:33:21][W][nextion:091]: Nextion is not connected!
[16:33:22][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[16:33:22][W][nextion:091]: Nextion is not connected!
[16:33:22][W][nextion:091]: Nextion is not connected!
[16:33:23][W][nextion:091]: Nextion is not connected!
[16:33:24][W][nextion:091]: Nextion is not connected!
[16:33:24][W][nextion:091]: Nextion is not connected!
[16:33:24][D][sensor:094]: 'ntc_source': Sending state 1.57950 V with 2 decimals of accuracy
[16:33:24][D][resistance:039]: 'resistance_sensor' - Resistance 10282.1Ω
[16:33:24][D][sensor:094]: 'resistance_sensor': Sending state 10282.12891 Ω with 1 decimals of accuracy
[16:33:24][D][ntc:026]: 'Temperature' - Temperature: 24.4°C
[16:33:24][D][sensor:094]: 'Temperature': Sending state 24.37518 °C with 1 decimals of accuracy
[16:33:24][D][climate:396]: 'Thermostat' - Sending state:
[16:33:24][D][climate:399]: Mode: OFF
[16:33:24][D][climate:401]: Action: OFF
[16:33:24][D][climate:419]: Current Temperature: 24.38°C
[16:33:24][D][climate:425]: Target Temperature: 18.00°C
[16:33:24][I][safe_mode:041]: Boot seems successful; resetting boot loop counter
[16:33:24][D][esp32.preferences:114]: Saving 2 preferences to flash...
[16:33:24][D][esp32.preferences:143]: Saving 2 preferences to flash: 1 cached, 1 written, 0 failed
[16:33:24][D][script.boot_log:2048]: Restart Nextion
[16:33:24][D][switch:016]: 'Nextion display - Power' Turning OFF.
[16:33:24][D][switch:055]: 'Nextion display - Power': Sending state OFF
[16:33:25][W][nextion:091]: Nextion is not connected!
[16:33:25][W][nextion:091]: Nextion is not connected!
[16:33:26][W][nextion:091]: Nextion is not connected!
[16:33:26][D][addon_upload_tft.script.report_upload_progress:158]: Stopping other scripts
[16:33:26][D][script.nextion_status:107]: Nextion status:
[16:33:26][D][script.nextion_status:108]: Is detected: NO
[16:33:26][D][script.nextion_status:109]: Is setup: NO
[16:33:26][D][script.nextion_status:110]: Queue size: 0
[16:33:26][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[16:33:26][D][script.set_baud_rate:3022]: Baud rate changing from 115200 to 9600 bps
[16:33:26][D][script.set_baud_rate:3023]: Flush UART
[16:33:26][D][script.set_baud_rate:3029]: Sending instruction 'baud=9600' to Nextion
[16:33:26][D][script.set_baud_rate:3031]: Flush UART
[16:33:26][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 9600 bps
[16:33:26][C][uart.idf:153]: UART 0 was reloaded.
[16:33:26][C][uart.idf:159]: UART Bus 0:
[16:33:26][C][uart.idf:160]: TX Pin: GPIO16
[16:33:26][C][uart.idf:161]: RX Pin: GPIO17
[16:33:26][C][uart.idf:163]: RX Buffer Size: 256
[16:33:26][C][uart.idf:165]: Baud Rate: 9600 baud
[16:33:26][C][uart.idf:166]: Data Bits: 8
[16:33:26][C][uart.idf:167]: Parity: NONE
[16:33:26][C][uart.idf:168]: Stop bits: 1
[16:33:26][D][script.set_baud_rate:3040]: Current baud rate: 9600 bps
[16:33:26][W][component:237]: Component script took a long time for an operation (51 ms).
[16:33:26][W][component:238]: Components should block for at most 30 ms.
[16:33:26][W][nextion:091]: Nextion is not connected!
[16:33:26][D][switch:012]: 'Nextion display - Power' Turning ON.
[16:33:26][D][switch:055]: 'Nextion display - Power': Sending state ON
[16:33:27][W][nextion:091]: Nextion is not connected!
[16:33:27][W][nextion:091]: Nextion is not connected!
[16:33:28][W][nextion:091]: Nextion is not connected!
[16:33:28][D][main:403]: Attempting to upload TFT
[16:33:28][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 9600 bps
[16:33:28][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:33:28][W][nextion:091]: Nextion is not connected!
[16:33:29][W][nextion:091]: Nextion is not connected!
[16:33:29][W][nextion:091]: Nextion is not connected!
[16:33:30][W][nextion:091]: Nextion is not connected!
[16:33:30][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:33:30][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:33:30][D][nextion.upload.idf:158]: Exit reparse: YES
[16:33:30][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_eu.tft
[16:33:30][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:33:30][D][nextion.upload.idf:188]: Baud rate: 9600
[16:33:30][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:33:30][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:33:30][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:33:30][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 9600 bps returned: NO
[16:33:30][W][nextion:091]: Nextion is not connected!
[16:33:31][W][nextion:091]: Nextion is not connected!
[16:33:31][W][nextion:091]: Nextion is not connected!
[16:33:32][W][nextion:091]: Nextion is not connected!
[16:33:32][W][nextion:091]: Nextion is not connected!
[16:33:33][W][nextion:091]: Nextion is not connected!
[16:33:33][W][nextion:091]: Nextion is not connected!
[16:33:34][W][nextion:091]: Nextion is not connected!
[16:33:34][D][sensor:094]: 'ntc_source': Sending state 1.58083 V with 2 decimals of accuracy
[16:33:34][D][resistance:039]: 'resistance_sensor' - Resistance 10298.8Ω
[16:33:34][D][sensor:094]: 'resistance_sensor': Sending state 10298.78809 Ω with 1 decimals of accuracy
[16:33:34][D][ntc:026]: 'Temperature' - Temperature: 24.3°C
[16:33:34][D][sensor:094]: 'Temperature': Sending state 24.33890 °C with 1 decimals of accuracy
[16:33:34][D][climate:396]: 'Thermostat' - Sending state:
[16:33:34][D][climate:399]: Mode: OFF
[16:33:34][D][climate:401]: Action: OFF
[16:33:34][D][climate:419]: Current Temperature: 24.34°C
[16:33:34][D][climate:425]: Target Temperature: 18.00°C
[16:33:34][W][nextion:091]: Nextion is not connected!
[16:33:35][D][main:403]: Attempting to upload TFT
[16:33:35][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #2 at 9600 bps
[16:33:35][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:33:35][W][nextion:091]: Nextion is not connected!
[16:33:35][W][nextion:091]: Nextion is not connected!
[16:33:36][W][nextion:091]: Nextion is not connected!
[16:33:36][W][nextion:091]: Nextion is not connected!
[16:33:37][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:33:37][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:33:37][D][nextion.upload.idf:158]: Exit reparse: YES
[16:33:37][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_eu.tft
[16:33:37][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:33:37][D][nextion.upload.idf:188]: Baud rate: 9600
[16:33:37][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:33:37][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:33:37][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:33:37][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #2 at 9600 bps returned: NO
[16:33:37][W][nextion:091]: Nextion is not connected!
[16:33:37][W][nextion:091]: Nextion is not connected!
[16:33:38][W][nextion:091]: Nextion is not connected!
[16:33:38][W][nextion:091]: Nextion is not connected!
[16:33:39][W][nextion:091]: Nextion is not connected!
[16:33:39][W][nextion:091]: Nextion is not connected!
[16:33:40][W][nextion:091]: Nextion is not connected!
[16:33:41][W][nextion:091]: Nextion is not connected!
[16:33:41][W][nextion:091]: Nextion is not connected!
[16:33:42][W][nextion:091]: Nextion is not connected!
[16:33:42][D][script.nextion_status:107]: Nextion status:
[16:33:42][D][script.nextion_status:108]: Is detected: NO
[16:33:42][D][script.nextion_status:109]: Is setup: NO
[16:33:42][D][script.nextion_status:110]: Queue size: 0
[16:33:42][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[16:33:42][D][script.set_baud_rate:3022]: Baud rate changing from 9600 to 115200 bps
[16:33:42][D][script.set_baud_rate:3023]: Flush UART
[16:33:42][D][script.set_baud_rate:3029]: Sending instruction 'baud=115200' to Nextion
[16:33:42][D][script.set_baud_rate:3031]: Flush UART
[16:33:42][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 115200 bps
[16:33:42][C][uart.idf:153]: UART 0 was reloaded.
[16:33:42][C][uart.idf:159]: UART Bus 0:
[16:33:42][C][uart.idf:160]: TX Pin: GPIO16
[16:33:42][C][uart.idf:161]: RX Pin: GPIO17
[16:33:42][C][uart.idf:163]: RX Buffer Size: 256
[16:33:42][C][uart.idf:165]: Baud Rate: 115200 baud
[16:33:43][C][uart.idf:166]: Data Bits: 8
[16:33:43][W][nextion:091]: Nextion is not connected!
[16:33:44][W][nextion:091]: Nextion is not connected!
[16:33:45][D][main:403]: Attempting to upload TFT
[16:33:45][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #3 at 115200 bps
[16:33:45][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:33:45][W][nextion:091]: Nextion is not connected!
[16:33:45][D][sensor:094]: 'ntc_source': Sending state 1.58067 V with 2 decimals of accuracy
[16:33:45][D][resistance:039]: 'resistance_sensor' - Resistance 10296.7Ω
[16:33:45][D][sensor:094]: 'resistance_sensor': Sending state 10296.70410 Ω with 1 decimals of accuracy
[16:33:45][D][ntc:026]: 'Temperature' - Temperature: 24.3°C
[16:33:45][D][sensor:094]: 'Temperature': Sending state 24.34344 °C with 1 decimals of accuracy
[16:33:45][D][climate:396]: 'Thermostat' - Sending state:
[16:33:45][D][climate:399]: Mode: OFF
[16:33:45][D][climate:401]: Action: OFF
[16:33:45][D][climate:419]: Current Temperature: 24.34°C
[16:33:45][D][climate:425]: Target Temperature: 18.00°C
[16:33:45][W][nextion:091]: Nextion is not connected!
[16:33:45][W][nextion:091]: Nextion is not connected!
[16:33:46][W][nextion:091]: Nextion is not connected!
[16:33:46][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:33:46][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:33:46][D][nextion.upload.idf:158]: Exit reparse: YES
[16:33:46][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_eu.tft
[16:33:46][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:33:46][D][nextion.upload.idf:188]: Baud rate: 115200
[16:33:46][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:33:46][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:33:46][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:33:46][W][component:237]: Component script took a long time for an operation (55 ms).
[16:33:46][W][component:238]: Components should block for at most 30 ms.
[16:33:46][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #3 at 115200 bps returned: NO
[16:33:46][W][nextion:091]: Nextion is not connected!
[16:33:47][W][nextion:091]: Nextion is not connected!
[16:33:47][W][nextion:091]: Nextion is not connected!
[16:33:48][W][nextion:091]: Nextion is not connected!
[16:33:48][W][nextion:091]: Nextion is not connected!
[16:33:49][W][nextion:091]: Nextion is not connected!
[16:33:49][W][nextion:091]: Nextion is not connected!
[16:33:50][W][nextion:091]: Nextion is not connected!
[16:33:50][W][nextion:091]: Nextion is not connected!
[16:33:51][W][nextion:091]: Nextion is not connected!
[16:33:51][D][main:403]: Attempting to upload TFT
[16:33:51][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #4 at 115200 bps
[16:33:51][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:33:51][W][nextion:091]: Nextion is not connected!
[16:33:52][W][nextion:091]: Nextion is not connected!
[16:33:52][W][nextion:091]: Nextion is not connected!
[16:33:53][W][nextion:091]: Nextion is not connected!
[16:33:53][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:33:53][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:33:53][D][nextion.upload.idf:158]: Exit reparse: YES
[16:33:53][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_eu.tft
[16:33:53][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:33:53][D][nextion.upload.idf:188]: Baud rate: 115200
[16:33:53][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:33:53][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:33:53][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:33:53][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #4 at 115200 bps returned: NO
[16:33:53][W][nextion:091]: Nextion is not connected!
[16:33:54][W][nextion:091]: Nextion is not connected!
[16:33:54][D][sensor:094]: 'ntc_source': Sending state 1.58067 V with 2 decimals of accuracy
[16:33:54][D][resistance:039]: 'resistance_sensor' - Resistance 10296.7Ω
[16:33:54][D][sensor:094]: 'resistance_sensor': Sending state 10296.70410 Ω with 1 decimals of accuracy
[16:33:54][D][ntc:026]: 'Temperature' - Temperature: 24.3°C
[16:33:54][D][sensor:094]: 'Temperature': Sending state 24.34344 °C with 1 decimals of accuracy
[16:33:54][D][climate:396]: 'Thermostat' - Sending state:
[16:33:54][D][climate:399]: Mode: OFF
[16:33:54][D][climate:401]: Action: OFF
[16:33:54][D][climate:419]: Current Temperature: 24.34°C
[16:33:54][D][climate:425]: Target Temperature: 18.00°C
[16:33:54][W][nextion:091]: Nextion is not connected!
[16:33:55][W][nextion:091]: Nextion is not connected!
[16:33:55][W][nextion:091]: Nextion is not connected!
[16:33:56][W][nextion:091]: Nextion is not connected!
[16:33:56][W][nextion:091]: Nextion is not connected!
[16:33:57][W][nextion:091]: Nextion is not connected!
[16:33:58][W][nextion:091]: Nextion is not connected!
[16:33:58][D][addon_upload_tft.script.report_upload_progress:158]: Restarting Nextion display
[16:33:58][D][switch:016]: 'Nextion display - Power' Turning OFF.
[16:33:58][D][switch:055]: 'Nextion display - Power': Sending state OFF
[16:33:58][W][nextion:091]: Nextion is not connected!
[16:33:59][W][nextion:091]: Nextion is not connected!
[16:33:59][W][nextion:091]: Nextion is not connected!
[16:34:00][W][nextion:091]: Nextion is not connected!
[16:34:00][D][switch:012]: 'Nextion display - Power' Turning ON.
[16:34:00][D][switch:055]: 'Nextion display - Power': Sending state ON
[16:34:00][D][sensor:094]: 'RSSI': Sending state -35.00000 dBm with 0 decimals of accuracy
[16:34:00][W][nextion:091]: Nextion is not connected!
[16:34:01][W][nextion:091]: Nextion is not connected!
[16:34:01][W][nextion:091]: Nextion is not connected!
[16:34:01][D][esp32.preferences:114]: Saving 1 preferences to flash...
[16:34:01][D][esp32.preferences:143]: Saving 1 preferences to flash: 1 cached, 0 written, 0 failed
[16:34:02][W][nextion:091]: Nextion is not connected!
[16:34:02][W][nextion:091]: Nextion is not connected!
[16:34:03][W][nextion:091]: Nextion is not connected!
[16:34:03][W][nextion:091]: Nextion is not connected!
[16:34:04][W][nextion:091]: Nextion is not connected!
[16:34:04][D][sensor:094]: 'ntc_source': Sending state 1.58150 V with 2 decimals of accuracy
[16:34:04][D][resistance:039]: 'resistance_sensor' - Resistance 10307.1Ω
[16:34:04][D][sensor:094]: 'resistance_sensor': Sending state 10307.12891 Ω with 1 decimals of accuracy
[16:34:04][D][ntc:026]: 'Temperature' - Temperature: 24.3°C
[16:34:04][D][sensor:094]: 'Temperature': Sending state 24.32076 °C with 1 decimals of accuracy
[16:34:04][D][climate:396]: 'Thermostat' - Sending state:
[16:34:04][D][climate:399]: Mode: OFF
[16:34:04][D][climate:401]: Action: OFF
[16:34:04][D][climate:419]: Current Temperature: 24.32°C
[16:34:04][D][climate:425]: Target Temperature: 18.00°C
[16:34:04][W][nextion:091]: Nextion is not connected!
[16:34:05][W][nextion:091]: Nextion is not connected!
[16:34:05][D][script.nextion_status:107]: Nextion status:
[16:34:05][D][script.nextion_status:108]: Is detected: NO
[16:34:05][D][script.nextion_status:109]: Is setup: NO
[16:34:05][D][script.nextion_status:110]: Queue size: 0
[16:34:05][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[16:34:05][W][nextion:091]: Nextion is not connected!
[16:34:06][W][nextion:091]: Nextion is not connected!
[16:34:06][W][nextion:091]: Nextion is not connected!
[16:34:07][W][nextion:091]: Nextion is not connected!
[16:34:07][D][main:403]: Attempting to upload TFT
[16:34:07][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #5 at 115200 bps
[16:34:07][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:34:07][W][nextion:091]: Nextion is not connected!
[16:34:08][W][nextion:091]: Nextion is not connected!
[16:34:08][W][nextion:091]: Nextion is not connected!
[16:34:09][W][nextion:091]: Nextion is not connected!
[16:34:09][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:34:09][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:34:09][D][nextion.upload.idf:158]: Exit reparse: YES
[16:34:09][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_eu.tft
[16:34:09][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:34:09][D][nextion.upload.idf:188]: Baud rate: 115200
[16:34:09][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:34:09][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:34:09][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:34:09][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #5 at 115200 bps returned: NO
[16:34:09][W][nextion:091]: Nextion is not connected!
[16:34:10][W][nextion:091]: Nextion is not connected!
[16:34:10][W][nextion:091]: Nextion is not connected!
[16:34:11][W][nextion:091]: Nextion is not connected!
[16:34:11][W][nextion:091]: Nextion is not connected!
[16:34:12][W][nextion:091]: Nextion is not connected!
[16:34:12][W][nextion:091]: Nextion is not connected!
[16:34:13][W][nextion:091]: Nextion is not connected!
[16:34:13][W][nextion:091]: Nextion is not connected!
[16:34:14][W][nextion:091]: Nextion is not connected!
[16:34:14][D][main:403]: Attempting to upload TFT
[16:34:14][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #6 at 115200 bps
[16:34:14][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:34:14][D][sensor:094]: 'ntc_source': Sending state 1.58067 V with 2 decimals of accuracy
[16:34:14][D][resistance:039]: 'resistance_sensor' - Resistance 10296.7Ω
[16:34:14][D][sensor:094]: 'resistance_sensor': Sending state 10296.70410 Ω with 1 decimals of accuracy
[16:34:14][D][ntc:026]: 'Temperature' - Temperature: 24.3°C
[16:34:14][D][sensor:094]: 'Temperature': Sending state 24.34344 °C with 1 decimals of accuracy
[16:34:14][D][climate:396]: 'Thermostat' - Sending state:
[16:34:14][D][climate:399]: Mode: OFF
[16:34:14][D][climate:401]: Action: OFF
[16:34:14][D][climate:419]: Current Temperature: 24.34°C
[16:34:14][D][climate:425]: Target Temperature: 18.00°C
[16:34:14][W][nextion:091]: Nextion is not connected!
[16:34:15][W][nextion:091]: Nextion is not connected!
[16:34:16][W][nextion:091]: Nextion is not connected!
[16:34:16][W][nextion:091]: Nextion is not connected!
[16:34:16][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:34:16][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:34:16][D][nextion.upload.idf:158]: Exit reparse: YES
[16:34:16][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_eu.tft
[16:34:16][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:34:16][D][nextion.upload.idf:188]: Baud rate: 115200
[16:34:16][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:34:16][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:34:16][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:34:16][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #6 at 115200 bps returned: NO
[16:34:17][W][nextion:091]: Nextion is not connected!
[16:34:17][W][nextion:091]: Nextion is not connected!
[16:34:17][D][text_sensor:064]: 'Device Name': Sending state 'nslekrum2'
[16:34:18][W][nextion:091]: Nextion is not connected!
[16:34:18][W][nextion:091]: Nextion is not connected!
[16:34:19][W][nextion:091]: Nextion is not connected!
[16:34:19][W][nextion:091]: Nextion is not connected!
[16:34:20][W][nextion:091]: Nextion is not connected!
[16:34:20][W][nextion:091]: Nextion is not connected!
[16:34:21][W][nextion:091]: Nextion is not connected!
[16:34:21][D][addon_upload_tft.script.report_upload_progress:158]: TFT upload failed
[16:34:21][D][addon_upload_tft.script.report_upload_progress:158]: Turn off Nextion and restart ESPHome
[16:34:21][D][switch:016]: 'Nextion display - Power' Turning OFF.
[16:34:21][D][switch:055]: 'Nextion display - Power': Sending state OFF
[16:34:21][W][nextion:091]: Nextion is not connected!
[16:34:22][W][nextion:091]: Nextion is not connected!
[16:34:22][W][nextion:091]: Nextion is not connected!
[16:34:23][W][nextion:091]: Nextion is not connected!

slangpetter · 2024-11-08T15:39:45Z

With nspanel_blank.tft from my server:

[16:38:02][D][button:010]: 'Update TFT display' Pressed.
[16:38:02][W][nextion:091]: Nextion is not connected!
[16:38:03][W][nextion:091]: Nextion is not connected!
[16:38:03][W][nextion:091]: Nextion is not connected!
[16:38:04][W][nextion:091]: Nextion is not connected!
[16:38:04][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[16:38:04][W][nextion:091]: Nextion is not connected!
[16:38:05][W][nextion:091]: Nextion is not connected!
[16:38:05][W][nextion:091]: Nextion is not connected!
[16:38:06][W][nextion:091]: Nextion is not connected!
[16:38:06][W][nextion:091]: Nextion is not connected!
[16:38:07][W][nextion:091]: Nextion is not connected!
[16:38:07][D][sensor:094]: 'ntc_source': Sending state 1.57520 V with 2 decimals of accuracy
[16:38:07][D][resistance:039]: 'resistance_sensor' - Resistance 10228.6Ω
[16:38:07][D][sensor:094]: 'resistance_sensor': Sending state 10228.57227 Ω with 1 decimals of accuracy
[16:38:07][D][ntc:026]: 'Temperature' - Temperature: 24.5°C
[16:38:07][D][sensor:094]: 'Temperature': Sending state 24.49226 °C with 1 decimals of accuracy
[16:38:07][D][climate:396]: 'Thermostat' - Sending state:
[16:38:07][D][climate:399]: Mode: OFF
[16:38:07][D][climate:401]: Action: OFF
[16:38:07][D][climate:419]: Current Temperature: 24.49°C
[16:38:07][D][climate:425]: Target Temperature: 18.00°C
[16:38:07][W][nextion:091]: Nextion is not connected!
[16:38:08][W][nextion:091]: Nextion is not connected!
[16:38:08][D][addon_upload_tft.script.report_upload_progress:158]: Set Nextion unavailable for blueprint calls
[16:38:08][D][addon_upload_tft.script.report_upload_progress:158]: Preparing for upload...
[16:38:08][D][script.nextion_status:107]: Nextion status:
[16:38:08][D][script.nextion_status:108]: Is detected: NO
[16:38:08][D][script.nextion_status:109]: Is setup: NO
[16:38:08][D][script.nextion_status:110]: Queue size: 0
[16:38:08][D][addon_upload_tft.script.upload_tft:220]: Starting the upload script
[16:38:08][D][addon_upload_tft.script.upload_tft:221]: Valid TFT: NO
[16:38:08][D][addon_upload_tft.script.upload_tft:222]: Current baud rate: 115200 bps
[16:38:08][D][addon_upload_tft.script.upload_tft:223]: Target upload baud rate: 9600 bps
[16:38:08][D][addon_upload_tft.script.upload_tft:224]: Upload URL: http://192.0.2.2/nspanel_blank.tft
[16:38:08][W][nextion:091]: Nextion is not connected!
[16:38:09][W][nextion:091]: Nextion is not connected!
[16:38:09][W][nextion:091]: Nextion is not connected!
[16:38:10][W][nextion:091]: Nextion is not connected!
[16:38:10][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[16:38:10][W][nextion:091]: Nextion is not connected!
[16:38:11][W][nextion:091]: Nextion is not connected!
[16:38:11][W][nextion:091]: Nextion is not connected!
[16:38:12][D][esp32.preferences:114]: Saving 1 preferences to flash...
[16:38:12][D][esp32.preferences:143]: Saving 1 preferences to flash: 1 cached, 0 written, 0 failed
[16:38:12][W][nextion:091]: Nextion is not connected!
[16:38:12][W][nextion:091]: Nextion is not connected!
[16:38:13][W][nextion:091]: Nextion is not connected!
[16:38:14][W][nextion:091]: Nextion is not connected!
[16:38:14][W][nextion:091]: Nextion is not connected!
[16:38:14][D][addon_upload_tft.script.report_upload_progress:158]: Stopping other scripts
[16:38:14][D][script.nextion_status:107]: Nextion status:
[16:38:14][D][script.nextion_status:108]: Is detected: NO
[16:38:14][D][script.nextion_status:109]: Is setup: NO
[16:38:14][D][script.nextion_status:110]: Queue size: 0
[16:38:14][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[16:38:14][D][script.set_baud_rate:3022]: Baud rate changing from 115200 to 9600 bps
[16:38:14][D][script.set_baud_rate:3023]: Flush UART
[16:38:14][D][script.set_baud_rate:3029]: Sending instruction 'baud=9600' to Nextion
[16:38:14][D][script.set_baud_rate:3031]: Flush UART
[16:38:14][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 9600 bps
[16:38:14][C][uart.idf:153]: UART 0 was reloaded.
[16:38:14][C][uart.idf:159]: UART Bus 0:
[16:38:14][C][uart.idf:160]: TX Pin: GPIO16
[16:38:14][C][uart.idf:161]: RX Pin: GPIO17
[16:38:14][C][uart.idf:163]: RX Buffer Size: 256
[16:38:14][C][uart.idf:165]: Baud Rate: 9600 baud
[16:38:14][C][uart.idf:166]: Data Bits: 8
[16:38:14][C][uart.idf:167]: Parity: NONE
[16:38:14][C][uart.idf:168]: Stop bits: 1
[16:38:14][D][script.set_baud_rate:3040]: Current baud rate: 9600 bps
[16:38:15][W][nextion:091]: Nextion is not connected!
[16:38:15][W][nextion:091]: Nextion is not connected!
[16:38:16][W][nextion:091]: Nextion is not connected!
[16:38:16][I][script.set_timezone:3151]: Setting timezone:
[16:38:16][C][homeassistant.time:010]: Home Assistant Time:
[16:38:16][C][homeassistant.time:011]: Timezone: 'CET-1CEST,M3.5.0,M10.5.0/3'
[16:38:16][D][script.boot_log:2048]: init_page_home
[16:38:16][W][nextion:091]: Nextion is not connected!
[16:38:16][D][script.boot_log:2048]: init_page_settings
[16:38:16][D][script.boot_log:2048]: init_hardware
[16:38:16][D][sensor:094]: 'RSSI': Sending state -38.00000 dBm with 0 decimals of accuracy
[16:38:16][D][script.boot_log:2048]: init_global
[16:38:16][D][main:403]: Attempting to upload TFT
[16:38:16][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 9600 bps
[16:38:16][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:38:17][W][nextion:091]: Nextion is not connected!
[16:38:17][D][sensor:094]: 'ntc_source': Sending state 1.57600 V with 2 decimals of accuracy
[16:38:17][D][resistance:039]: 'resistance_sensor' - Resistance 10238.5Ω
[16:38:17][D][sensor:094]: 'resistance_sensor': Sending state 10238.51660 Ω with 1 decimals of accuracy
[16:38:17][D][ntc:026]: 'Temperature' - Temperature: 24.5°C
[16:38:17][D][sensor:094]: 'Temperature': Sending state 24.47046 °C with 1 decimals of accuracy
[16:38:17][D][climate:396]: 'Thermostat' - Sending state:
[16:38:17][D][climate:399]: Mode: OFF
[16:38:17][D][climate:401]: Action: OFF
[16:38:17][D][climate:419]: Current Temperature: 24.47°C
[16:38:17][D][climate:425]: Target Temperature: 18.00°C
[16:38:17][W][nextion:091]: Nextion is not connected!
[16:38:18][W][nextion:091]: Nextion is not connected!
[16:38:18][W][nextion:091]: Nextion is not connected!
[16:38:18][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:38:18][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:38:18][D][nextion.upload.idf:158]: Exit reparse: YES
[16:38:18][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_blank.tft
[16:38:18][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:38:18][D][nextion.upload.idf:188]: Baud rate: 9600
[16:38:18][D][nextion.upload.idf:235]: TFT file size: 275044 bytes
[16:38:18][D][nextion.upload.idf:248]: Uploading Nextion
[16:38:24][D][nextion.upload.idf:287]: Upgrade response is [] - 0 byte(s)
[16:38:24][E][nextion.upload.idf:293]: Preparation for TFT upload failed 0 ""
[16:38:24][D][nextion.upload.idf:294]: Close HTTP connection
[16:38:24][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:38:24][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:38:24][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:38:24][W][component:237]: Component script took a long time for an operation (5559 ms).
[16:38:24][W][component:238]: Components should block for at most 30 ms.
[16:38:24][W][nextion:091]: Nextion is not connected!
[16:38:24][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 9600 bps returned: NO
[16:38:24][W][nextion:091]: Nextion is not connected!
[16:38:25][W][nextion:091]: Nextion is not connected!
[16:38:25][W][nextion:091]: Nextion is not connected!
[16:38:26][I][script.set_timezone:3151]: Setting timezone:
[16:38:26][C][homeassistant.time:010]: Home Assistant Time:
[16:38:26][C][homeassistant.time:011]: Timezone: 'CET-1CEST,M3.5.0,M10.5.0/3'
[16:38:26][D][script.boot_log:2048]: init_page_home
[16:38:26][W][nextion:091]: Nextion is not connected!
[16:38:26][D][script.boot_log:2048]: init_page_settings
[16:38:26][D][script.boot_log:2048]: init_hardware
[16:38:26][D][script.boot_log:2048]: init_global
[16:38:26][W][nextion:091]: Nextion is not connected!
[16:38:27][W][nextion:091]: Nextion is not connected!
[16:38:27][D][sensor:094]: 'ntc_source': Sending state 1.57650 V with 2 decimals of accuracy
[16:38:27][D][resistance:039]: 'resistance_sensor' - Resistance 10244.7Ω
[16:38:27][D][sensor:094]: 'resistance_sensor': Sending state 10244.73340 Ω with 1 decimals of accuracy
[16:38:27][D][ntc:026]: 'Temperature' - Temperature: 24.5°C
[16:38:27][D][sensor:094]: 'Temperature': Sending state 24.45685 °C with 1 decimals of accuracy
[16:38:27][D][climate:396]: 'Thermostat' - Sending state:
[16:38:27][D][climate:399]: Mode: OFF
[16:38:27][D][climate:401]: Action: OFF
[16:38:27][D][climate:419]: Current Temperature: 24.46°C
[16:38:27][D][climate:425]: Target Temperature: 18.00°C
[16:38:27][W][nextion:091]: Nextion is not connected!
[16:38:28][W][nextion:091]: Nextion is not connected!
[16:38:28][W][nextion:091]: Nextion is not connected!
[16:38:29][I][safe_mode:041]: Boot seems successful; resetting boot loop counter
[16:38:29][D][esp32.preferences:114]: Saving 2 preferences to flash...
[16:38:29][D][esp32.preferences:143]: Saving 2 preferences to flash: 1 cached, 1 written, 0 failed
[16:38:29][D][main:403]: Attempting to upload TFT
[16:38:29][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #2 at 9600 bps
[16:38:29][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:38:29][D][script.boot_log:2048]: Restart Nextion
[16:38:29][D][switch:016]: 'Nextion display - Power' Turning OFF.
[16:38:29][D][switch:055]: 'Nextion display - Power': Sending state OFF
[16:38:29][W][nextion:091]: Nextion is not connected!
[16:38:29][W][nextion:091]: Nextion is not connected!
[16:38:30][W][nextion:091]: Nextion is not connected!
[16:38:30][W][nextion:091]: Nextion is not connected!
[16:38:31][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:38:31][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:38:31][D][nextion.upload.idf:158]: Exit reparse: YES
[16:38:31][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_blank.tft
[16:38:31][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:38:31][D][nextion.upload.idf:188]: Baud rate: 9600
[16:38:31][D][nextion.upload.idf:235]: TFT file size: 275044 bytes
[16:38:31][D][nextion.upload.idf:248]: Uploading Nextion
[16:38:36][D][nextion.upload.idf:287]: Upgrade response is [] - 0 byte(s)
[16:38:36][E][nextion.upload.idf:293]: Preparation for TFT upload failed 0 ""
[16:38:36][D][nextion.upload.idf:294]: Close HTTP connection
[16:38:36][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:38:36][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:38:36][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:38:36][W][component:237]: Component script took a long time for an operation (5604 ms).
[16:38:36][W][component:238]: Components should block for at most 30 ms.
[16:38:36][W][nextion:091]: Nextion is not connected!
[16:38:36][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #2 at 9600 bps returned: NO
[16:38:36][D][switch:012]: 'Nextion display - Power' Turning ON.
[16:38:36][D][switch:055]: 'Nextion display - Power': Sending state ON
[16:38:37][W][nextion:091]: Nextion is not connected!
[16:38:37][D][sensor:094]: 'ntc_source': Sending state 1.57750 V with 2 decimals of accuracy
[16:38:37][D][resistance:039]: 'resistance_sensor' - Resistance 10257.2Ω
[16:38:37][D][sensor:094]: 'resistance_sensor': Sending state 10257.18457 Ω with 1 decimals of accuracy
[16:38:37][D][ntc:026]: 'Temperature' - Temperature: 24.4°C
[16:38:37][D][sensor:094]: 'Temperature': Sending state 24.42962 °C with 1 decimals of accuracy
[16:38:37][D][climate:396]: 'Thermostat' - Sending state:
[16:38:37][D][climate:399]: Mode: OFF
[16:38:37][D][climate:401]: Action: OFF
[16:38:37][D][climate:419]: Current Temperature: 24.43°C
[16:38:37][D][climate:425]: Target Temperature: 18.00°C
[16:38:37][W][nextion:091]: Nextion is not connected!
[16:38:38][W][nextion:091]: Nextion is not connected!
[16:38:38][W][nextion:091]: Nextion is not connected!
[16:38:39][W][nextion:091]: Nextion is not connected!
[16:38:39][W][nextion:091]: Nextion is not connected!
[16:38:40][W][nextion:091]: Nextion is not connected!
[16:38:41][W][nextion:091]: Nextion is not connected!
[16:38:41][W][nextion:091]: Nextion is not connected!
[16:38:41][D][script.nextion_status:107]: Nextion status:
[16:38:41][D][script.nextion_status:108]: Is detected: NO
[16:38:41][D][script.nextion_status:109]: Is setup: NO
[16:38:41][D][script.nextion_status:110]: Queue size: 0
[16:38:41][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[16:38:41][D][script.set_baud_rate:3022]: Baud rate changing from 9600 to 115200 bps
[16:38:41][D][script.set_baud_rate:3023]: Flush UART
[16:38:41][D][script.set_baud_rate:3029]: Sending instruction 'baud=115200' to Nextion
[16:38:41][D][script.set_baud_rate:3031]: Flush UART
[16:38:41][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 115200 bps
[16:38:41][C][uart.idf:153]: UART 0 was reloaded.
[16:38:41][C][uart.idf:159]: UART Bus 0:
[16:38:41][C][uart.idf:160]: TX Pin: GPIO16
[16:38:41][C][uart.idf:161]: RX Pin: GPIO17
[16:38:41][C][uart.idf:163]: RX Buffer Size: 256
[16:38:41][C][uart.idf:165]: Baud Rate: 115200 baud
[16:38:41][C][uart.idf:166]: Data Bits: 8
[16:38:42][W][nextion:091]: Nextion is not connected!
[16:38:42][W][nextion:091]: Nextion is not connected!
[16:38:43][W][nextion:091]: Nextion is not connected!
[16:38:43][W][nextion:091]: Nextion is not connected!
[16:38:43][D][main:403]: Attempting to upload TFT
[16:38:43][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #3 at 115200 bps
[16:38:43][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[16:38:44][W][nextion:091]: Nextion is not connected!
[16:38:44][W][nextion:091]: Nextion is not connected!
[16:38:45][W][nextion:091]: Nextion is not connected!
[16:38:45][W][nextion:091]: Nextion is not connected!
[16:38:46][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[16:38:46][D][nextion.upload.idf:157]: Nextion TFT upload requested
[16:38:46][D][nextion.upload.idf:158]: Exit reparse: YES
[16:38:46][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_blank.tft
[16:38:46][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[16:38:46][D][nextion.upload.idf:188]: Baud rate: 115200
[16:38:46][D][nextion.upload.idf:235]: TFT file size: 275044 bytes
[16:38:46][D][nextion.upload.idf:248]: Uploading Nextion
[16:38:51][D][nextion.upload.idf:287]: Upgrade response is [] - 0 byte(s)
[16:38:51][E][nextion.upload.idf:293]: Preparation for TFT upload failed 0 ""
[16:38:51][D][nextion.upload.idf:294]: Close HTTP connection
[16:38:51][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[16:38:51][E][nextion.upload.idf:358]: Nextion TFT upload failed
[16:38:51][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[16:38:51][W][component:237]: Component script took a long time for an operation (5552 ms).
[16:38:51][W][component:238]: Components should block for at most 30 ms.
[16:38:51][W][nextion:091]: Nextion is not connected!
[16:38:51][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #3 at 115200 bps returned: NO
[16:38:51][D][sensor:094]: 'ntc_source': Sending state 1.57650 V with 2 decimals of accuracy
[16:38:51][D][resistance:039]: 'resistance_sensor' - Resistance 10244.7Ω
[16:38:51][D][sensor:094]: 'resistance_sensor': Sending state 10244.73340 Ω with 1 decimals of accuracy
[16:38:51][D][ntc:026]: 'Temperature' - Temperature: 24.5°C
[16:38:51][D][sensor:094]: 'Temperature': Sending state 24.45685 °C with 1 decimals of accuracy
[16:38:51][D][climate:396]: 'Thermostat' - Sending state:
[16:38:51][D][climate:399]: Mode: OFF
[16:38:51][D][climate:401]: Action: OFF
[16:38:51][D][climate:419]: Current Temperature: 24.46°C
[16:38:51][D][climate:425]: Target Temperature: 18.00°C
[16:38:52][W][nextion:091]: Nextion is not connected!
[16:38:52][W][nextion:091]: Nextion is not connected!
[16:38:53][W][nextion:091]: Nextion is not connected!
[16:38:53][W][nextion:091]: Nextion is not connected!
[16:38:54][W][nextion:091]: Nextion is not connected!

edwardtfn · 2024-11-08T19:53:55Z

[16:27:38][D][nextion.upload.idf:235]: TFT file size: 4294967295 bytes
[16:27:38][E][nextion.upload.idf:237]: File size check failed.

On addition to net connecting to Nextion, it's also getting an error with file size when downloading.

Also, when I've asked to try different baud rates, o was referring to "Baud rate" and not "Update TFT - Baud rate".

Third, I would suggest selecting the "Blank" model (or the specific model you have) in "Update TFT - Model".

Finally, do you mind sharing your panel's yaml? Please hide any sensitive/private info before sharing.

Mauricewillemstein · 2024-11-09T17:33:28Z

I had the same thing.
I did put the tft baudrate on a lower setting, then upload tft.
It takes a while but then it started. After that i did put it on a higer rate and all working well.

Maybe this will help you.

slangpetter · 2024-11-11T17:53:16Z

This is with 9600

[18:50:47][I][app:100]: ESPHome version 2024.10.3 compiled on Nov 8 2024, 16:36:21
[18:50:47][I][app:102]: Project esphome.NSPanel_HA_Blueprint version 4.3.12
[18:50:47][C][wifi:600]: WiFi:
[18:50:47][C][wifi:428]: Local MAC: E4:65:B8:1D:21:BC
[18:50:47][C][wifi:433]: SSID: [redacted]
[18:50:47][C][wifi:436]: IP Address: 192.0.2.150
[18:50:47][C][wifi:440]: BSSID: [redacted]
[18:50:47][C][wifi:441]: Hostname: 'nslekrum2'
[18:50:47][C][wifi:443]: Signal strength: -37 dB ▂▄▆█
[18:50:47][C][wifi:447]: Channel: 1
[18:50:47][C][wifi:448]: Subnet: 255.255.255.0
[18:50:47][C][wifi:449]: Gateway: 192.0.2.4
[18:50:47][C][wifi:450]: DNS1: 8.8.8.8
[18:50:47][C][wifi:451]: DNS2: 8.8.4.4
[18:50:47][C][logger:185]: Logger:
[18:50:47][C][logger:186]: Level: DEBUG
[18:50:47][C][logger:188]: Log Baud Rate: 0
[18:50:47][C][logger:189]: Hardware UART: UART0
[18:50:47][C][uart.idf:159]: UART Bus 0:
[18:50:47][C][uart.idf:160]: TX Pin: GPIO16
[18:50:47][C][uart.idf:161]: RX Pin: GPIO17
[18:50:47][C][uart.idf:163]: RX Buffer Size: 256
[18:50:47][C][uart.idf:165]: Baud Rate: 9600 baud
[18:50:47][C][uart.idf:166]: Data Bits: 8
[18:50:47][C][uart.idf:167]: Parity: NONE
[18:50:47][C][uart.idf:168]: Stop bits: 1
[18:50:47][C][ledc.output:180]: LEDC Output:
[18:50:47][C][ledc.output:181]: Pin GPIO21
[18:50:47][C][ledc.output:182]: LEDC Channel: 0
[18:50:47][C][ledc.output:183]: PWM Frequency: 1000.0 Hz
[18:50:47][C][ledc.output:184]: Phase angle: 0.0°
[18:50:47][C][ledc.output:185]: Bit depth: 16
[18:50:47][C][template.binary_sensor:028]: Template Binary Sensor 'Nextion display'
[18:50:47][C][template.binary_sensor:028]: Device Class: 'connectivity'
[18:50:47][C][template.number:050]: Template Number 'Display Brightness'
[18:50:47][C][template.number:050]: Unit of Measurement: '%'
[18:50:47][C][template.number:051]: Optimistic: YES
[18:50:47][C][template.number:052]: Update Interval: 60.0s
[18:50:47][C][template.number:050]: Template Number 'Display Brightness Dimdown'
[18:50:47][C][template.number:050]: Unit of Measurement: '%'
[18:50:47][C][template.number:051]: Optimistic: YES
[18:50:47][C][template.number:052]: Update Interval: 60.0s
[18:50:47][C][template.number:050]: Template Number 'Display Brightness Sleep'
[18:50:47][C][template.number:050]: Unit of Measurement: '%'
[18:50:47][C][template.number:051]: Optimistic: YES
[18:50:47][C][template.number:052]: Update Interval: 60.0s
[18:50:47][C][template.number:050]: Template Number 'Temperature Correction'
[18:50:47][C][template.number:050]: Unit of Measurement: '°C'
[18:50:47][C][template.number:051]: Optimistic: YES
[18:50:47][C][template.number:052]: Update Interval: 60.0s
[18:50:47][C][template.number:050]: Template Number 'Timeout Page'
[18:50:47][C][template.number:050]: Icon: 'mdi:timer'
[18:50:47][C][template.number:050]: Unit of Measurement: 's'
[18:50:47][C][template.number:051]: Optimistic: YES
[18:50:47][C][template.number:052]: Update Interval: 60.0s
[18:50:47][C][template.number:050]: Template Number 'Timeout Dimming'
[18:50:47][C][template.number:050]: Icon: 'mdi:timer'
[18:50:47][C][template.number:050]: Unit of Measurement: 's'
[18:50:47][C][template.number:051]: Optimistic: YES
[18:50:47][C][template.number:052]: Update Interval: 60.0s
[18:50:47][C][template.number:050]: Template Number 'Timeout Sleep'
[18:50:47][C][template.number:050]: Icon: 'mdi:timer'
[18:50:47][C][template.number:050]: Unit of Measurement: 's'
[18:50:47][C][template.number:051]: Optimistic: YES
[18:50:47][C][template.number:052]: Update Interval: 60.0s
[18:50:47][C][template.select:065]: Template Select 'Baud rate'
[18:50:47][C][template.select:065]: Icon: 'mdi:swap-horizontal'
[18:50:47][C][template.select:066]: Update Interval: 60.0s
[18:50:47][C][template.select:069]: Optimistic: YES
[18:50:47][C][template.select:070]: Initial Option: 115200
[18:50:47][C][template.select:071]: Restore Value: YES
[18:50:47][C][template.select:065]: Template Select 'Wake-up page'
[18:50:47][C][template.select:065]: Icon: 'mdi:page-next-outline'
[18:50:47][C][template.select:066]: Update Interval: 60.0s
[18:50:47][C][template.select:069]: Optimistic: YES
[18:50:47][C][template.select:070]: Initial Option: home
[18:50:47][C][template.select:071]: Restore Value: YES
[18:50:47][C][template.select:065]: Template Select 'Update TFT display - Model'
[18:50:47][C][template.select:065]: Icon: 'mdi:file-sync'
[18:50:47][C][template.select:066]: Update Interval: 60.0s
[18:50:47][C][template.select:069]: Optimistic: YES
[18:50:47][C][template.select:070]: Initial Option: NSPanel EU
[18:50:47][C][template.select:071]: Restore Value: YES
[18:50:47][C][template.select:065]: Template Select 'Update TFT display - Baud rate'
[18:50:47][C][template.select:065]: Icon: 'mdi:swap-horizontal'
[18:50:47][C][template.select:066]: Update Interval: 60.0s
[18:50:47][C][template.select:069]: Optimistic: YES
[18:50:47][C][template.select:070]: Initial Option: 921600
[18:50:47][C][template.select:071]: Restore Value: YES
[18:50:47][C][switch.gpio:068]: GPIO Switch 'Nextion display - Power'
[18:50:47][C][switch.gpio:091]: Restore Mode: always ON
[18:50:47][C][switch.gpio:031]: Pin: GPIO4
[18:50:47][C][template.text_sensor:020]: Template Sensor 'Device Name'
[18:50:47][C][template.text_sensor:020]: Icon: 'mdi:identifier'
[18:50:47][C][template.text_sensor:020]: Template Sensor 'Detailed Entity'
[18:50:47][C][template.text_sensor:020]: Icon: 'mdi:tablet-dashboard'
[18:50:47][C][template.text_sensor:020]: Template Sensor 'Notification Label'
[18:50:47][C][template.text_sensor:020]: Template Sensor 'Notification Text'
[18:50:47][C][template.text_sensor:020]: Template Sensor 'Version Blueprint'
[18:50:47][C][template.text_sensor:020]: Icon: 'mdi:tag-text-outline'
[18:50:47][C][template.text_sensor:020]: Template Sensor 'Version ESPHome'
[18:50:47][C][template.text_sensor:020]: Icon: 'mdi:tag-text-outline'
[18:50:47][C][template.sensor:022]: Template Sensor 'Blueprint'
[18:50:47][C][template.sensor:022]: State Class: ''
[18:50:47][C][template.sensor:022]: Unit of Measurement: '%'
[18:50:47][C][template.sensor:022]: Accuracy Decimals: 1
[18:50:47][C][template.sensor:022]: Icon: 'mdi:link-variant'
[18:50:47][C][template.sensor:023]: Update Interval: 60.0s
[18:50:47][W][nextion:091]: Nextion is not connected!
[18:50:48][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Left Button'
[18:50:48][C][gpio.binary_sensor:016]: Pin: GPIO14
[18:50:48][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Right Button'
[18:50:48][C][gpio.binary_sensor:016]: Pin: GPIO27
[18:50:48][C][switch.gpio:068]: GPIO Switch 'Relay 1'
[18:50:48][C][switch.gpio:091]: Restore Mode: restore defaults to OFF
[18:50:48][C][switch.gpio:031]: Pin: GPIO22
[18:50:48][C][switch.gpio:068]: GPIO Switch 'Relay 2'
[18:50:48][C][switch.gpio:091]: Restore Mode: restore defaults to OFF
[18:50:48][C][switch.gpio:031]: Pin: GPIO19
[18:50:48][C][template.switch:068]: Template Switch 'Notification unread'
[18:50:48][C][template.switch:091]: Restore Mode: always OFF
[18:50:48][C][template.switch:057]: Optimistic: YES
[18:50:48][C][template.switch:068]: Template Switch 'Notification sound'
[18:50:48][C][template.switch:091]: Restore Mode: restore defaults to OFF
[18:50:48][C][template.switch:057]: Optimistic: YES
[18:50:48][C][template.switch:068]: Template Switch 'Relay 0 (dummy)'
[18:50:48][C][template.switch:091]: Restore Mode: always OFF
[18:50:48][C][template.switch:057]: Optimistic: YES
[18:50:48][C][psram:020]: PSRAM:
[18:50:48][C][psram:021]: Available: YES
[18:50:48][C][psram:024]: Size: 2036 KB
[18:50:48][C][rtttl:029]: Rtttl
[18:50:48][C][nextion:138]: Nextion:
[18:50:48][C][nextion:142]: Device Model:
[18:50:48][C][nextion:143]: Firmware Version:
[18:50:48][C][nextion:144]: Serial Number:
[18:50:48][C][nextion:145]: Flash Size:
[18:50:48][C][nextion:147]: Wake On Touch: YES
[18:50:48][C][nextion:148]: Exit reparse: YES
[18:50:48][W][nextion:091]: Nextion is not connected!
[18:50:48][C][factory_reset.button:011]: Factory Reset Button 'Factory reset'
[18:50:48][C][factory_reset.button:011]: Icon: 'mdi:restart-alert'
[18:50:48][C][restart.button:017]: Restart Button 'Restart'
[18:50:48][C][restart.button:017]: Icon: 'mdi:restart'
[18:50:48][C][adc:097]: ADC Sensor 'ntc_source'
[18:50:48][C][adc:097]: Device Class: 'voltage'
[18:50:48][C][adc:097]: State Class: 'measurement'
[18:50:48][C][adc:097]: Unit of Measurement: 'V'
[18:50:48][C][adc:097]: Accuracy Decimals: 2
[18:50:48][C][adc:107]: Pin: GPIO38
[18:50:48][C][adc:122]: Attenuation: 12db
[18:50:48][C][adc:141]: Samples: 4
[18:50:48][C][adc:142]: Update Interval: 10.0s
[18:50:48][C][resistance:010]: Resistance Sensor 'resistance_sensor'
[18:50:48][C][resistance:010]: State Class: 'measurement'
[18:50:48][C][resistance:010]: Unit of Measurement: 'Ω'
[18:50:48][C][resistance:010]: Accuracy Decimals: 1
[18:50:48][C][resistance:010]: Icon: 'mdi:flash'
[18:50:48][C][resistance:011]: Configuration: DOWNSTREAM
[18:50:48][C][resistance:012]: Resistor: 11200.00Ω
[18:50:48][C][resistance:013]: Reference Voltage: 3.3V
[18:50:48][C][ntc:014]: NTC Sensor 'Temperature'
[18:50:48][C][ntc:014]: Device Class: 'temperature'
[18:50:48][C][ntc:014]: State Class: 'measurement'
[18:50:48][C][ntc:014]: Unit of Measurement: '°C'
[18:50:48][C][ntc:014]: Accuracy Decimals: 1
[18:50:48][C][thermostat.climate:1296]: Thermostat 'Thermostat'
[18:50:48][C][thermostat.climate:1301]: Start-up Delay Enabled: NO
[18:50:48][C][thermostat.climate:1317]: Heating Parameters:
[18:50:48][C][thermostat.climate:1318]: Deadband: 0.5°C
[18:50:48][C][thermostat.climate:1319]: Overrun: 0.5°C
[18:50:48][C][thermostat.climate:1326]: Minimum Off Time: 300s
[18:50:48][C][thermostat.climate:1328]: Minimum Run Time: 300s
[18:50:48][C][thermostat.climate:1343]: Minimum Idle Time: 30s
[18:50:48][C][thermostat.climate:1344]: Supports AUTO: NO
[18:50:48][C][thermostat.climate:1345]: Supports HEAT/COOL: NO
[18:50:48][C][thermostat.climate:1346]: Supports COOL: NO
[18:50:48][C][thermostat.climate:1347]: Supports DRY: NO
[18:50:48][C][thermostat.climate:1348]: Supports FAN_ONLY: NO
[18:50:48][C][thermostat.climate:1350]: Supports FAN_ONLY_ACTION_USES_FAN_MODE_TIMER: NO
[18:50:48][C][thermostat.climate:1351]: Supports FAN_ONLY_COOLING: NO
[18:50:48][C][thermostat.climate:1356]: Supports FAN_WITH_HEATING: NO
[18:50:48][C][thermostat.climate:1358]: Supports HEAT: YES
[18:50:48][C][thermostat.climate:1359]: Supports FAN MODE ON: NO
[18:50:48][C][thermostat.climate:1360]: Supports FAN MODE OFF: NO
[18:50:48][C][thermostat.climate:1361]: Supports FAN MODE AUTO: NO
[18:50:48][C][thermostat.climate:1362]: Supports FAN MODE LOW: NO
[18:50:48][C][thermostat.climate:1363]: Supports FAN MODE MEDIUM: NO
[18:50:48][C][thermostat.climate:1364]: Supports FAN MODE HIGH: NO
[18:50:48][C][thermostat.climate:1365]: Supports FAN MODE MIDDLE: NO
[18:50:48][C][thermostat.climate:1366]: Supports FAN MODE FOCUS: NO
[18:50:48][C][thermostat.climate:1367]: Supports FAN MODE DIFFUSE: NO
[18:50:48][C][thermostat.climate:1368]: Supports FAN MODE QUIET: NO
[18:50:48][C][thermostat.climate:1369]: Supports SWING MODE BOTH: NO
[18:50:48][C][thermostat.climate:1370]: Supports SWING MODE OFF: NO
[18:50:48][C][thermostat.climate:1371]: Supports SWING MODE HORIZONTAL: NO
[18:50:48][C][thermostat.climate:1372]: Supports SWING MODE VERTICAL: NO
[18:50:48][C][thermostat.climate:1373]: Supports TWO SET POINTS: NO
[18:50:48][C][thermostat.climate:1375]: Supported PRESETS:
[18:50:48][C][thermostat.climate:1379]: Supports HOME: YES
[18:50:48][C][thermostat.climate:963]: HOME Is Default: NO
[18:50:48][C][thermostat.climate:970]: HOME Default Target Temperature Low: 18.0°C
[18:50:48][C][thermostat.climate:984]: HOME Default Mode: HEAT
[18:50:48][C][thermostat.climate:1383]: Supported CUSTOM PRESETS:
[18:50:48][C][thermostat.climate:1387]: Supports Off: YES
[18:50:48][C][thermostat.climate:963]: Off Is Default: YES
[18:50:48][C][thermostat.climate:970]: Off Default Target Temperature Low: 18.0°C
[18:50:48][C][thermostat.climate:984]: Off Default Mode: OFF
[18:50:48][C][thermostat.climate:1391]: On boot, restore from: MEMORY
[18:50:48][C][homeassistant.time:010]: Home Assistant Time:
[18:50:48][C][homeassistant.time:011]: Timezone: 'CET-1CEST,M3.5.0,M10.5.0/3'
[18:50:48][W][nextion:091]: Nextion is not connected!
[18:50:49][C][mdns:116]: mDNS:
[18:50:49][C][mdns:117]: Hostname: nslekrum2
[18:50:49][C][esphome.ota:073]: Over-The-Air updates:
[18:50:49][C][esphome.ota:074]: Address: nslekrum2.local:3232
[18:50:49][C][esphome.ota:075]: Version: 2
[18:50:49][C][esphome.ota:078]: Password configured
[18:50:49][C][safe_mode:018]: Safe Mode:
[18:50:49][C][safe_mode:020]: Boot considered successful after 60 seconds
[18:50:49][C][safe_mode:021]: Invoke after 3 boot attempts
[18:50:49][C][safe_mode:023]: Remain in safe mode for 180 seconds
[18:50:49][C][api:140]: API Server:
[18:50:49][C][api:141]: Address: nslekrum2.local:6053
[18:50:49][C][api:143]: Using noise encryption: YES
[18:50:49][C][wifi_signal.sensor:010]: WiFi Signal 'RSSI'
[18:50:49][C][wifi_signal.sensor:010]: Device Class: 'signal_strength'
[18:50:49][C][wifi_signal.sensor:010]: State Class: 'measurement'
[18:50:49][C][wifi_signal.sensor:010]: Unit of Measurement: 'dBm'
[18:50:49][C][wifi_signal.sensor:010]: Accuracy Decimals: 0
[18:50:49][C][wifi_signal.sensor:010]: Icon: 'mdi:wifi'
[18:50:49][W][nextion:091]: Nextion is not connected!
[18:50:49][W][nextion:091]: Nextion is not connected!
[18:50:50][W][nextion:091]: Nextion is not connected!
[18:50:50][D][addon_upload_tft.script.report_upload_progress:158]: Stopping other scripts
[18:50:50][D][script.nextion_status:107]: Nextion status:
[18:50:50][D][script.nextion_status:108]: Is detected: NO
[18:50:50][D][script.nextion_status:109]: Is setup: NO
[18:50:50][D][script.nextion_status:110]: Queue size: 0
[18:50:50][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[18:50:50][W][nextion:091]: Nextion is not connected!
[18:50:51][W][nextion:091]: Nextion is not connected!
[18:50:51][W][nextion:091]: Nextion is not connected!
[18:50:52][W][nextion:091]: Nextion is not connected!
[18:50:52][D][main:403]: Attempting to upload TFT
[18:50:52][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 9600 bps
[18:50:52][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[18:50:52][W][nextion:091]: Nextion is not connected!
[18:50:53][W][nextion:091]: Nextion is not connected!
[18:50:54][W][nextion:091]: Nextion is not connected!
[18:50:54][W][nextion:091]: Nextion is not connected!
[18:50:54][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[18:50:54][D][nextion.upload.idf:157]: Nextion TFT upload requested
[18:50:54][D][nextion.upload.idf:158]: Exit reparse: YES
[18:50:54][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_blank.tft
[18:50:54][D][nextion.upload.idf:174]: Exiting Nextion reparse mode
[18:50:54][D][nextion.upload.idf:188]: Baud rate: 9600
[18:50:54][D][nextion.upload.idf:235]: TFT file size: 275044 bytes
[18:50:54][D][nextion.upload.idf:248]: Uploading Nextion
[18:51:00][D][nextion.upload.idf:287]: Upgrade response is [] - 0 byte(s)
[18:51:00][E][nextion.upload.idf:293]: Preparation for TFT upload failed 0 ""
[18:51:00][D][nextion.upload.idf:294]: Close HTTP connection
[18:51:00][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[18:51:00][E][nextion.upload.idf:358]: Nextion TFT upload failed
[18:51:00][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[18:51:00][W][component:237]: Component script took a long time for an operation (5752 ms).
[18:51:00][W][component:238]: Components should block for at most 30 ms.
[18:51:00][W][nextion:091]: Nextion is not connected!
[18:51:00][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 9600 bps returned: NO
[18:51:00][D][sensor:094]: 'ntc_source': Sending state 1.68033 V with 2 decimals of accuracy
[18:51:00][D][resistance:039]: 'resistance_sensor' - Resistance 11619.5Ω
[18:51:00][D][sensor:094]: 'resistance_sensor': Sending state 11619.50879 Ω with 1 decimals of accuracy
[18:51:00][D][ntc:026]: 'Temperature' - Temperature: 21.7°C
[18:51:00][D][sensor:094]: 'Temperature': Sending state 21.65988 °C with 1 decimals of accuracy
[18:51:00][D][climate:396]: 'Thermostat' - Sending state:
[18:51:00][D][climate:399]: Mode: OFF
[18:51:00][D][climate:401]: Action: OFF
[18:51:00][D][climate:419]: Current Temperature: 21.66°C
[18:51:00][D][climate:425]: Target Temperature: 18.00°C
[18:51:00][W][nextion:091]: Nextion is not connected!
[18:51:01][W][nextion:091]: Nextion is not connected!
[18:51:02][W][nextion:091]: Nextion is not connected!
[18:51:02][W][nextion:091]: Nextion is not connected!
[18:51:03][W][nextion:091]: Nextion is not connected!
[18:51:03][W][nextion:091]: Nextion is not connected!
[18:51:04][W][nextion:091]: Nextion is not connected!
[18:51:04][W][nextion:091]: Nextion is not connected!
[18:51:04][D][sensor:094]: 'ntc_source': Sending state 1.68033 V with 2 decimals of accuracy
[18:51:04][D][resistance:039]: 'resistance_sensor' - Resistance 11619.5Ω
[18:51:04][D][sensor:094]: 'resistance_sensor': Sending state 11619.50879 Ω with 1 decimals of accuracy
[18:51:04][D][ntc:026]: 'Temperature' - Temperature: 21.7°C
[18:51:04][D][sensor:094]: 'Temperature': Sending state 21.65988 °C with 1 decimals of accuracy
[18:51:04][D][climate:396]: 'Thermostat' - Sending state:
[18:51:04][D][climate:399]: Mode: OFF
[18:51:04][D][climate:401]: Action: OFF
[18:51:04][D][climate:419]: Current Temperature: 21.66°C
[18:51:04][D][climate:425]: Target Temperature: 18.00°C

slangpetter · 2024-11-11T17:54:42Z

esp32:
framework:
type: esp-idf

api:
encryption:
key: "xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"

substitutions:

Settings - Editable values

device_name: "nslekrum2"
friendly_name: "NS Lekrum2"
wifi_ssid: !secret wifi_ssid
wifi_password: !secret wifi_password
#nextion_update_url: "http://192.0.2.2/nspanel_eu.tft" # Optional
nextion_update_url: "http://192.0.2.2/nspanel_blank.tft"
#nextion_update_url: "http://github.com/Blackymas/NSPanel_HA_Blueprint/blob/main/hmi/nspanel_blank.tft"

Add-on configuration (if needed)

heater_relay: "1" # Possible values: "1" or "2"

Customization area

My customization - Start

My customization - End

Core and optional configurations

packages:
remote_package:
url: https://github.com/Blackymas/NSPanel_HA_Blueprint
ref: main
refresh: 300s
files:
- nspanel_esphome.yaml # Basic package
# Optional advanced and add-on configurations
# - esphome/nspanel_esphome_advanced.yaml
# - esphome/nspanel_esphome_addon_ble_tracker.yaml
# - esphome/nspanel_esphome_addon_bluetooth_proxy.yaml
# - esphome/nspanel_esphome_addon_climate_cool.yaml
- esphome/nspanel_esphome_addon_climate_heat.yaml
# - esphome/nspanel_esphome_addon_climate_dual.yaml
# - esphome/nspanel_esphome_addon_cover.yaml

slangpetter · 2024-11-11T17:58:29Z

I have 5 NS Panels around the house. Almost never had problems updating. Sometimes I had to try a couple of times, but newer got this stuck.

edwardtfn · 2024-11-11T18:29:12Z

Ok, now you changed where I wanna you to try.

Please try other baud rates (not Update Baud Rate, but just Baud rate. When you get to the right one, you will get the Nextion model on the logs:

[18:50:48][C][nextion:138]: Nextion:
[18:50:48][C][nextion:142]: Device Model:
[18:50:48][C][nextion:143]: Firmware Version:
[18:50:48][C][nextion:144]: Serial Number:
[18:50:48][C][nextion:145]: Flash Size:
[18:50:48][C][nextion:147]: Wake On Touch: YES
[18:50:48][C][nextion:148]: Exit reparse: YES
[18:50:48][W][nextion:091]: Nextion is not connected!

When you are in the right baud rate, it should look like this:

[19:25:24][C][nextion:138]: Nextion:
[19:25:24][C][nextion:142]:   Device Model:     NX4832F035_011C
[19:25:24][C][nextion:143]:   Firmware Version: 110
[19:25:24][C][nextion:144]:   Serial Number:    xxxxxxxxxxxxxxxxxxxxx
[19:25:24][C][nextion:145]:   Flash Size:       16777216
[19:25:24][C][nextion:147]:   Wake On Touch:    YES
[19:25:24][C][nextion:148]:   Exit reparse:     YES

If none of the baud rates works, then you probably have a physical issue between your ESP32 and the Nextion display, but this is very unlikely.

edwardtfn · 2024-11-11T18:33:16Z

I'm pretty sure I've created a Baud rate scanner before... have to look for that or develop again, but you probably will be able to manually test all before I find time to work at this.

slangpetter · 2024-11-11T19:20:09Z

On 38400 i got something

[20:19:15][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 38400 bps
[20:19:15][C][uart.idf:153]: UART 0 was reloaded.
[20:19:15][C][uart.idf:159]: UART Bus 0:
[20:19:15][C][uart.idf:160]: TX Pin: GPIO16
[20:19:15][C][uart.idf:161]: RX Pin: GPIO17
[20:19:15][C][uart.idf:163]: RX Buffer Size: 256
[20:19:15][C][uart.idf:165]: Baud Rate: 38400 baud
[20:19:15][C][uart.idf:166]: Data Bits: 8
[20:19:15][C][uart.idf:167]: Parity: NONE
[20:19:15][C][uart.idf:168]: Stop bits: 1
[20:19:15][D][script.set_baud_rate:3040]: Current baud rate: 38400 bps
[20:19:15][W][nextion:091]: Nextion is not connected!
[20:19:16][D][nextion:080]: 0x1A error ignored during setup
[20:19:16][I][nextion:097]: Nextion is connected
[20:19:16][C][nextion:138]: Nextion:
[20:19:16][C][nextion:142]: Device Model: NX4832F035_011C
[20:19:16][C][nextion:143]: Firmware Version: 110
[20:19:16][C][nextion:144]: Serial Number: D9B334017B606E50
[20:19:16][C][nextion:145]: Flash Size: 16777216
[20:19:16][C][nextion:147]: Wake On Touch: YES
[20:19:16][C][nextion:148]: Exit reparse: YES
[20:19:16][W][component:237]: Component display took a long time for an operation (160 ms).
[20:19:16][W][component:238]: Components should block for at most 30 ms.
[20:19:21][D][text_sensor:064]: 'Device Name': Sending state 'nslekrum2'
[20:19:24][D][nextion:302]: Manually set nextion report ready
[20:19:24][D][nextion:380]: Nextion is setup
[20:19:24][D][script.boot_log:2048]: on_setup
[20:19:24][D][binary_sensor:036]: 'Nextion display': Sending state ON
[20:19:24][W][nextion:431]: Nextion reported variable name invalid!
[20:19:24][E][nextion:311]: Nextion queue is empty!
[20:19:25][D][sensor:094]: 'ntc_source': Sending state 1.70283 V with 2 decimals of accuracy
[20:19:25][D][resistance:039]: 'resistance_sensor' - Resistance 11941.0Ω
[20:19:25][D][sensor:094]: 'resistance_sensor': Sending state 11940.98242 Ω with 1 decimals of accuracy
[20:19:25][D][ntc:026]: 'Temperature' - Temperature: 21.1°C
[20:19:25][D][sensor:094]: 'Temperature': Sending state 21.06061 °C with 1 decimals of accuracy
[20:19:25][D][climate:396]: 'Thermostat' - Sending state:
[20:19:25][D][climate:399]: Mode: OFF
[20:19:25][D][climate:401]: Action: OFF
[20:19:25][D][climate:419]: Current Temperature: 21.06°C
[20:19:25][D][climate:425]: Target Temperature: 18.00°C
[20:19:25][W][nextion:431]: Nextion reported variable name invalid!
[20:19:25][W][nextion:431]: Nextion reported variable name invalid!

slangpetter · 2024-11-11T19:23:05Z

What baudrate should the udate baud rate be? The same, 38600?

edwardtfn · 2024-11-11T19:23:08Z

Nice!
Now try changing it to 115200bps and check if the model still shown. If so, please try to upload TFT again.

edwardtfn · 2024-11-11T19:24:28Z

Upload baud rate can be 921600bps. The issue you are seeing is with the regular communication baud rate.

slangpetter · 2024-11-11T19:27:33Z

Nope, dident work...
[20:25:44][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 115200 bps
[20:25:44][C][uart.idf:153]: UART 0 was reloaded.
[20:25:44][C][uart.idf:159]: UART Bus 0:
[20:25:44][C][uart.idf:160]: TX Pin: GPIO16
[20:25:44][C][uart.idf:161]: RX Pin: GPIO17
[20:25:44][C][uart.idf:163]: RX Buffer Size: 256
[20:25:44][C][uart.idf:165]: Baud Rate: 115200 baud
[20:25:44][C][uart.idf:166]: Data Bits: 8
[20:25:44][C][uart.idf:167]: Parity: NONE
[20:25:44][C][uart.idf:168]: Stop bits: 1
[20:25:44][D][script.set_baud_rate:3040]: Current baud rate: 115200 bps
[20:25:44][W][nextion:770]: Received unknown event from nextion: 0xFC
[20:25:44][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"

slangpetter · 2024-11-11T19:28:02Z

Ha, now 38400 don´´t work again...

slangpetter · 2024-11-11T19:43:54Z

It´s random. Sometimes 2400 works.
Got this now

[20:43:07][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 2400 bps
[20:43:07][C][uart.idf:153]: UART 0 was reloaded.
[20:43:07][C][uart.idf:159]: UART Bus 0:
[20:43:07][C][uart.idf:160]: TX Pin: GPIO16
[20:43:07][C][uart.idf:161]: RX Pin: GPIO17
[20:43:07][C][uart.idf:163]: RX Buffer Size: 256
[20:43:07][C][uart.idf:165]: Baud Rate: 2400 baud
[20:43:07][C][uart.idf:166]: Data Bits: 8
[20:43:07][C][uart.idf:167]: Parity: NONE
[20:43:07][C][uart.idf:168]: Stop bits: 1
[20:43:07][D][script.set_baud_rate:3040]: Current baud rate: 2400 bps
[20:43:08][D][sensor:094]: 'ntc_source': Sending state 1.64067 V with 2 decimals of accuracy
[20:43:08][D][resistance:039]: 'resistance_sensor' - Resistance 11074.0Ω
[20:43:08][D][sensor:094]: 'resistance_sensor': Sending state 11074.00879 Ω with 1 decimals of accuracy
[20:43:08][D][ntc:026]: 'Temperature' - Temperature: 22.7°C
[20:43:08][D][sensor:094]: 'Temperature': Sending state 22.72171 °C with 1 decimals of accuracy
[20:43:08][D][climate:396]: 'Thermostat' - Sending state:
[20:43:08][D][climate:399]: Mode: OFF
[20:43:08][D][climate:401]: Action: OFF
[20:43:08][D][climate:419]: Current Temperature: 22.72°C
[20:43:08][D][climate:425]: Target Temperature: 18.00°C
[20:43:08][W][nextion:431]: Nextion reported variable name invalid!
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "send_command_printf"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "goto_page"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "send_command_printf"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_font_color"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "send_command_printf"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_font_color"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "send_command_printf"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_font_color"
[20:43:08][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:08][W][component:237]: Component display took a long time for an operation (53 ms).
[20:43:08][W][component:238]: Components should block for at most 30 ms.
[20:43:08][W][nextion:431]: Nextion reported variable name invalid!
[20:43:08][W][nextion:431]: Nextion reported variable name invalid!
[20:43:08][W][nextion:431]: Nextion reported variable name invalid!
[20:43:08][W][nextion:431]: Nextion reported variable name invalid!
[20:43:18][D][sensor:094]: 'ntc_source': Sending state 1.64150 V with 2 decimals of accuracy
[20:43:18][D][resistance:039]: 'resistance_sensor' - Resistance 11085.2Ω
[20:43:18][D][sensor:094]: 'resistance_sensor': Sending state 11085.19922 Ω with 1 decimals of accuracy
[20:43:18][D][ntc:026]: 'Temperature' - Temperature: 22.7°C
[20:43:18][D][sensor:094]: 'Temperature': Sending state 22.69933 °C with 1 decimals of accuracy
[20:43:18][D][climate:396]: 'Thermostat' - Sending state:
[20:43:18][D][climate:399]: Mode: OFF
[20:43:18][D][climate:401]: Action: OFF
[20:43:18][D][climate:419]: Current Temperature: 22.70°C
[20:43:18][D][climate:425]: Target Temperature: 18.00°C
[20:43:18][W][nextion:431]: Nextion reported variable name invalid!
[20:43:18][D][nextion:796]: Removing old queue type "NO_RESULT" name "send_command_printf"
[20:43:18][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_font_color"
[20:43:18][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:43:18][W][nextion:431]: Nextion reported variable name invalid!
[20:43:18][W][nextion:431]: Nextion reported variable name invalid!
[20:43:18][W][nextion:431]: Nextion reported variable name invalid!
[20:43:18][W][nextion:431]: Nextion reported variable name invalid!
[20:43:28][D][sensor:094]: 'ntc_source': Sending state 1.64167 V with 2 decimals of accuracy
[20:43:28][D][resistance:039]: 'resistance_sensor' - Resistance 11087.4Ω
[20:43:28][D][sensor:094]: 'resistance_sensor': Sending state 11087.43848 Ω with 1 decimals of accuracy
[20:43:28][D][ntc:026]: 'Temperature' - Temperature: 22.7°C
[20:43:28][D][sensor:094]: 'Temperature': Sending state 22.69485 °C with 1 decimals of accuracy
[20:43:28][D][climate:396]: 'Thermostat' - Sending state:
[20:43:28][D][climate:399]: Mode: OFF
[20:43:28][D][climate:401]: Action: OFF
[20:43:28][D][climate:419]: Current Temperature: 22.69°C
[20:43:28][D][climate:425]: Target Temperature: 18.00°C
[20:43:28][W][nextion:431]: Nextion reported variable name invalid!
[20:43:28][W][nextion:431]: Nextion reported variable name invalid!
[20:43:28][W][nextion:431]: Nextion reported variable name invalid!
[20:43:28][W][nextion:431]: Nextion reported variable name invalid!
[20:43:28][W][nextion:431]: Nextion reported variable name invalid!
[20:43:30][W][nextion:431]: Nextion reported variable name invalid!
[20:43:30][W][nextion:431]: Nextion reported variable name invalid!
[20:43:30][W][nextion:431]: Nextion reported variable name invalid!
[20:43:31][D][script.check_versions:2131]: Versions:
[20:43:31][D][script.check_versions:2132]: TFT:
[20:43:32][D][script.check_versions:2133]: ESPHome: 4.3.12
[20:43:32][E][script.check_versions:2135]: TFT version mismatch!
[20:43:32][D][script.check_versions:2136]: Blueprint: 4.3.12
[20:43:32][D][script.timer_sleep:3298]: Going to sleep from page
[20:43:32][W][nextion:392]: Nextion reported page ID invalid!
[20:43:32][E][nextion:576]: ERROR: Received numeric return but next in queue "backlight_brightness" is not a valid sensor type 0

slangpetter · 2024-11-11T19:53:15Z

When i use low baud rate, like 2400 I get this:

[20:52:26][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 2400 bps
[20:52:26][C][uart.idf:153]: UART 0 was reloaded.
[20:52:26][C][uart.idf:159]: UART Bus 0:
[20:52:26][C][uart.idf:160]: TX Pin: GPIO16
[20:52:26][C][uart.idf:161]: RX Pin: GPIO17
[20:52:26][C][uart.idf:163]: RX Buffer Size: 256
[20:52:26][C][uart.idf:165]: Baud Rate: 2400 baud
[20:52:26][C][uart.idf:166]: Data Bits: 8
[20:52:26][C][uart.idf:167]: Parity: NONE
[20:52:26][C][uart.idf:168]: Stop bits: 1
[20:52:26][D][script.set_baud_rate:3040]: Current baud rate: 2400 bps
[20:52:26][D][sensor:094]: 'RSSI': Sending state -48.00000 dBm with 0 decimals of accuracy
[20:52:29][D][sensor:094]: 'ntc_source': Sending state 1.63283 V with 2 decimals of accuracy
[20:52:29][D][resistance:039]: 'resistance_sensor' - Resistance 10969.4Ω
[20:52:29][D][sensor:094]: 'resistance_sensor': Sending state 10969.35156 Ω with 1 decimals of accuracy
[20:52:29][D][ntc:026]: 'Temperature' - Temperature: 22.9°C
[20:52:29][D][sensor:094]: 'Temperature': Sending state 22.93230 °C with 1 decimals of accuracy
[20:52:29][D][climate:396]: 'Thermostat' - Sending state:
[20:52:29][D][climate:399]: Mode: OFF
[20:52:29][D][climate:401]: Action: OFF
[20:52:29][D][climate:419]: Current Temperature: 22.93°C
[20:52:29][D][climate:425]: Target Temperature: 18.00°C
[20:52:29][W][nextion:431]: Nextion reported variable name invalid!
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "send_command_printf"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "send_command_printf"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_font_color"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "send_command_printf"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_font_color"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "send_command_printf"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_font_color"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "send_command_printf"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_font_color"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "send_command_printf"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_font_color"
[20:52:29][D][nextion:796]: Removing old queue type "NO_RESULT" name "set_component_text"
[20:52:29][W][component:237]: Component display took a long time for an operation (72 ms).
[20:52:29][W][component:238]: Components should block for at most 30 ms.
[20:52:29][W][nextion:431]: Nextion reported variable name invalid!
[20:52:29][W][nextion:431]: Nextion reported variable name invalid!
[20:52:29][W][nextion:431]: Nextion reported variable name invalid!
[20:52:29][W][nextion:431]: Nextion reported variable name invalid!
[20:52:33][W][nextion:431]: Nextion reported variable name invalid!
[20:52:33][W][nextion:431]: Nextion reported variable name invalid!
[20:52:33][W][nextion:431]: Nextion reported variable name invalid!

slangpetter · 2024-11-11T19:54:47Z

Whwn i go higher, like 38400 or higher i dont get them...

[20:53:54][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 115200 bps
[20:53:54][C][uart.idf:153]: UART 0 was reloaded.
[20:53:54][C][uart.idf:159]: UART Bus 0:
[20:53:54][C][uart.idf:160]: TX Pin: GPIO16
[20:53:54][C][uart.idf:161]: RX Pin: GPIO17
[20:53:54][C][uart.idf:163]: RX Buffer Size: 256
[20:53:54][C][uart.idf:165]: Baud Rate: 115200 baud
[20:53:54][C][uart.idf:166]: Data Bits: 8
[20:53:54][C][uart.idf:167]: Parity: NONE
[20:53:54][C][uart.idf:168]: Stop bits: 1
[20:53:54][D][script.set_baud_rate:3040]: Current baud rate: 115200 bps
[20:53:59][D][sensor:094]: 'ntc_source': Sending state 1.62950 V with 2 decimals of accuracy
[20:53:59][D][resistance:039]: 'resistance_sensor' - Resistance 10925.1Ω
[20:53:59][D][sensor:094]: 'resistance_sensor': Sending state 10925.11133 Ω with 1 decimals of accuracy
[20:53:59][D][ntc:026]: 'Temperature' - Temperature: 23.0°C
[20:53:59][D][sensor:094]: 'Temperature': Sending state 23.02202 °C with 1 decimals of accuracy
[20:53:59][D][climate:396]: 'Thermostat' - Sending state:
[20:53:59][D][climate:399]: Mode: OFF
[20:53:59][D][climate:401]: Action: OFF
[20:53:59][D][climate:419]: Current Temperature: 23.02°C
[20:53:59][D][climate:425]: Target Temperature: 18.00°C
[20:54:09][D][sensor:094]: 'ntc_source': Sending state 1.62967 V with 2 decimals of accuracy
[20:54:09][D][resistance:039]: 'resistance_sensor' - Resistance 10927.3Ω
[20:54:09][D][sensor:094]: 'resistance_sensor': Sending state 10927.32031 Ω with 1 decimals of accuracy
[20:54:09][D][ntc:026]: 'Temperature' - Temperature: 23.0°C
[20:54:09][D][sensor:094]: 'Temperature': Sending state 23.01753 °C with 1 decimals of accuracy
[20:54:09][D][climate:396]: 'Thermostat' - Sending state:
[20:54:09][D][climate:399]: Mode: OFF
[20:54:09][D][climate:401]: Action: OFF
[20:54:09][D][climate:419]: Current Temperature: 23.02°C
[20:54:09][D][climate:425]: Target Temperature: 18.00°C
[20:54:14][D][esp32.preferences:114]: Saving 2 preferences to flash...
[20:54:14][D][esp32.preferences:143]: Saving 2 preferences to flash: 1 cached, 1 written, 0 failed
[20:54:19][D][sensor:094]: 'ntc_source': Sending state 1.62983 V with 2 decimals of accuracy
[20:54:19][D][resistance:039]: 'resistance_sensor' - Resistance 10929.5Ω
[20:54:19][D][sensor:094]: 'resistance_sensor': Sending state 10929.52637 Ω with 1 decimals of accuracy
[20:54:19][D][ntc:026]: 'Temperature' - Temperature: 23.0°C
[20:54:19][D][sensor:094]: 'Temperature': Sending state 23.01305 °C with 1 decimals of accuracy
[20:54:19][D][climate:396]: 'Thermostat' - Sending state:
[20:54:19][D][climate:399]: Mode: OFF
[20:54:19][D][climate:401]: Action: OFF
[20:54:19][D][climate:419]: Current Temperature: 23.01°C
[20:54:19][D][climate:425]: Target Temperature: 18.00°C
[20:54:21][D][text_sensor:064]: 'Device Name': Sending state 'nslekrum2'
[20:54:25][D][time:051]: Synchronized time: 2024-11-11 20:54:25

slangpetter · 2024-11-11T20:20:11Z

Got this when in 115200 and 2400. Then it rebooted.

[21:18:58][D][climate:399]: Mode: OFF
[21:18:58][D][climate:401]: Action: OFF
[21:18:58][D][climate:419]: Current Temperature: 23.72°C
[21:18:58][D][climate:425]: Target Temperature: 18.00°C
[21:18:59][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[21:18:59][D][nextion.upload.idf:157]: Nextion TFT upload requested
[21:18:59][D][nextion.upload.idf:158]: Exit reparse: NO
[21:18:59][D][nextion.upload.idf:159]: URL: http://192.0.2.2/nspanel_blank.tft
[21:18:59][D][nextion.upload.idf:188]: Baud rate: 2400
[21:19:00][D][nextion.upload.idf:235]: TFT file size: 275044 bytes
[21:19:00][D][nextion.upload.idf:248]: Uploading Nextion
[21:19:01][D][nextion.upload.idf:287]: Upgrade response is [05] - 1 byte(s)
[21:19:01][D][nextion.upload.idf:308]: Uploading TFT to Nextion:
[21:19:01][D][nextion.upload.idf:309]: URL: http://192.0.2.2/nspanel_blank.tft
[21:19:01][D][nextion.upload.idf:310]: File size: 275044 bytes
[21:19:01][D][nextion.upload.idf:311]: Free heap: 2156275
[21:19:01][D][nextion.upload.idf:026]: Range start: 0
[21:19:01][D][esp-idf:000]: I (231966) HTTP_CLIENT: Body received in fetch header state, 0x3ffdc471, 187

edwardtfn · 2024-11-11T20:24:23Z

Did you got the QRcode in the screen?

slangpetter · 2024-11-11T20:26:00Z

No, I see the progress bar on the screen, but then it reboots

edwardtfn · 2024-11-11T20:31:14Z

[21:18:59][D][nextion.upload.idf:188]: Baud rate: 2400

I don't think lower baud rates will make your life easier... But every time you try to change it, the display will be instructed to start using that new baud rate forever, so if the command goes thru, that will be your new baud rate.
When you find a baud rate which works, try to change only to 115200bps. If that fails, go back to the baud rate which works (as that should stay the same) and try again to change to 115200bps. It usually works for the first time, but it can happen that you have to try twice...

The upload baud rate can be different (and ideally as high as possible) as that is temporary and your panel will respore the previous baud rate after a restart at the end of the TFT transfer. The TFT transfer tries first at the disered baud rate, then at the current baud rate then at the default baud rate (115200bps).

edwardtfn · 2024-11-11T20:31:36Z

No, I see the progress bar on the screen, but then it reboots

What do you see after the reboot?

slangpetter · 2024-11-11T20:32:23Z

"System Data ERROR!"

slangpetter · 2024-11-11T20:33:39Z

I think its stuck in som way. When i try Kleinheribert trick to flash the TFT with Nextion Editor it starts to go then just stops.

slangpetter · 2024-11-11T20:34:17Z

Is there a way to "clear" the TFT?

edwardtfn · 2024-11-11T20:35:06Z

On your device's page (Settings > Devices and Services > ESPHome), on the "Update TFT - Model", please try other than the Use nextion_update_url (like, try to select your panel's model directly) and the click to update again.

edwardtfn · 2024-11-11T20:35:23Z

Is there a way to "clear" the TFT?

Nope

edwardtfn · 2024-11-11T20:35:58Z

On your device's page (Settings > Devices and Services > ESPHome), on the "Update TFT - Model", please try other than the Use nextion_update_url (like, try to select your panel's model directly) and the click to update again.

Please share logs

slangpetter · 2024-11-11T20:46:23Z

This time i dien´t see the upload screen

[21:43:50][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 2400 bps
[21:43:50][C][uart.idf:153]: UART 0 was reloaded.
[21:43:50][C][uart.idf:159]: UART Bus 0:
[21:43:50][C][uart.idf:160]: TX Pin: GPIO16
[21:43:50][C][uart.idf:161]: RX Pin: GPIO17
[21:43:50][C][uart.idf:163]: RX Buffer Size: 256
[21:43:50][C][uart.idf:165]: Baud Rate: 2400 baud
[21:43:50][C][uart.idf:166]: Data Bits: 8
[21:43:50][C][uart.idf:167]: Parity: NONE
[21:43:50][C][uart.idf:168]: Stop bits: 1
[21:43:50][D][script.set_baud_rate:3040]: Current baud rate: 2400 bps
[21:43:50][D][sensor:094]: 'ntc_source': Sending state 1.60067 V with 2 decimals of accuracy
[21:43:50][D][resistance:039]: 'resistance_sensor' - Resistance 10549.7Ω
[21:43:50][D][sensor:094]: 'resistance_sensor': Sending state 10549.70410 Ω with 1 decimals of accuracy
[21:43:50][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:43:50][D][sensor:094]: 'Temperature': Sending state 23.80055 °C with 1 decimals of accuracy
[21:43:50][D][climate:396]: 'Thermostat' - Sending state:
[21:43:50][D][climate:399]: Mode: OFF
[21:43:50][D][climate:401]: Action: OFF
[21:43:50][D][climate:419]: Current Temperature: 23.80°C
[21:43:50][D][climate:425]: Target Temperature: 18.00°C
[21:43:50][W][nextion:091]: Nextion is not connected!
[21:43:51][D][nextion:080]: 0x1A error ignored during setup
[21:43:51][W][nextion:091]: Nextion is not connected!
[21:43:51][D][nextion:080]: 0x1A error ignored during setup
[21:43:52][I][nextion:097]: Nextion is connected
[21:43:52][C][nextion:138]: Nextion:
[21:43:52][C][nextion:142]: Device Model: NX4832F035_011C
[21:43:52][C][nextion:143]: Firmware Version: 110
[21:43:52][C][nextion:144]: Serial Number: D9B334017B606E50
[21:43:52][C][nextion:145]: Flash Size: 16777216
[21:43:52][C][nextion:147]: Wake On Touch: YES
[21:43:52][C][nextion:148]: Exit reparse: YES
[21:43:52][W][nextion:431]: Nextion reported variable name invalid!
[21:43:52][E][nextion:311]: Nextion queue is empty!
[21:43:52][W][nextion:431]: Nextion reported variable name invalid!
[21:43:52][E][nextion:311]: Nextion queue is empty!
[21:43:52][W][nextion:770]: Received unknown event from nextion: 0x63
[21:43:52][W][component:237]: Component display took a long time for an operation (168 ms).
[21:43:52][W][component:238]: Components should block for at most 30 ms.
[21:43:57][D][sensor:094]: 'RSSI': Sending state -51.00000 dBm with 0 decimals of accuracy
[21:43:59][D][nextion:302]: Manually set nextion report ready
[21:44:00][D][nextion:380]: Nextion is setup
[21:44:00][D][script.boot_log:2048]: on_setup
[21:44:00][D][binary_sensor:036]: 'Nextion display': Sending state ON
[21:44:00][W][nextion:431]: Nextion reported variable name invalid!
[21:44:00][E][nextion:311]: Nextion queue is empty!
[21:44:00][D][sensor:094]: 'ntc_source': Sending state 1.60083 V with 2 decimals of accuracy
[21:44:00][D][resistance:039]: 'resistance_sensor' - Resistance 10551.8Ω
[21:44:00][D][sensor:094]: 'resistance_sensor': Sending state 10551.83984 Ω with 1 decimals of accuracy
[21:44:00][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:44:00][D][sensor:094]: 'Temperature': Sending state 23.79604 °C with 1 decimals of accuracy
[21:44:00][D][climate:396]: 'Thermostat' - Sending state:
[21:44:00][D][climate:399]: Mode: OFF
[21:44:00][D][climate:401]: Action: OFF
[21:44:00][D][climate:419]: Current Temperature: 23.80°C
[21:44:00][D][climate:425]: Target Temperature: 18.00°C
[21:44:01][W][component:237]: Component time took a long time for an operation (493 ms).
[21:44:01][W][component:238]: Components should block for at most 30 ms.
[21:44:01][W][nextion:431]: Nextion reported variable name invalid!
[21:44:01][W][nextion:431]: Nextion reported variable name invalid!
[21:44:01][W][nextion:431]: Nextion reported variable name invalid!
[21:44:01][W][nextion:431]: Nextion reported variable name invalid!
[21:44:01][W][nextion:431]: Nextion reported variable name invalid!
[21:44:01][W][nextion:431]: Nextion reported variable name invalid!
[21:44:01][W][nextion:431]: Nextion reported variable name invalid!
[21:44:01][W][nextion:431]: Nextion reported variable name invalid!
[21:44:01][D][text_sensor:064]: 'Device Name': Sending state 'nslekrum2'
[21:44:01][W][nextion:431]: Nextion reported variable name invalid!
[21:44:01][W][nextion:431]: Nextion reported variable name invalid!
[21:44:01][W][nextion:431]: Nextion reported variable name invalid!
[21:44:01][W][nextion:431]: Nextion reported variable name invalid!
[21:44:02][D][button:010]: 'Update TFT display' Pressed.
[21:44:05][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[21:44:05][W][nextion:392]: Nextion reported page ID invalid!
[21:44:07][W][nextion:431]: Nextion reported variable name invalid!
[21:44:08][D][addon_upload_tft.script.report_upload_progress:158]: Set Nextion unavailable for blueprint calls
[21:44:08][D][binary_sensor:036]: 'Nextion display': Sending state OFF
[21:44:08][D][addon_upload_tft.script.report_upload_progress:158]: Preparing for upload...
[21:44:08][D][script.nextion_status:107]: Nextion status:
[21:44:08][D][script.nextion_status:108]: Is detected: YES
[21:44:08][D][script.nextion_status:109]: Is setup: YES
[21:44:08][D][script.nextion_status:110]: Queue size: 0
[21:44:08][D][addon_upload_tft.script.upload_tft:220]: Starting the upload script
[21:44:08][D][addon_upload_tft.script.upload_tft:221]: Valid TFT: NO
[21:44:08][D][addon_upload_tft.script.upload_tft:222]: Current baud rate: 2400 bps
[21:44:08][D][addon_upload_tft.script.upload_tft:223]: Target upload baud rate: 115200 bps
[21:44:08][D][addon_upload_tft.script.upload_tft:224]: Upload URL: https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/v4.3.12/hmi/nspanel_eu.tft
[21:44:10][D][sensor:094]: 'ntc_source': Sending state 1.60083 V with 2 decimals of accuracy
[21:44:10][D][resistance:039]: 'resistance_sensor' - Resistance 10551.8Ω
[21:44:10][D][sensor:094]: 'resistance_sensor': Sending state 10551.83984 Ω with 1 decimals of accuracy
[21:44:10][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:44:10][D][sensor:094]: 'Temperature': Sending state 23.79604 °C with 1 decimals of accuracy
[21:44:10][D][climate:396]: 'Thermostat' - Sending state:
[21:44:10][D][climate:399]: Mode: OFF
[21:44:10][D][climate:401]: Action: OFF
[21:44:10][D][climate:419]: Current Temperature: 23.80°C
[21:44:10][D][climate:425]: Target Temperature: 18.00°C
[21:44:10][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[21:44:11][W][nextion:392]: Nextion reported page ID invalid!
[21:44:13][W][nextion:431]: Nextion reported variable name invalid!
[21:44:15][D][addon_upload_tft.script.report_upload_progress:158]: Stopping other scripts
[21:44:15][D][script.nextion_status:107]: Nextion status:
[21:44:15][D][script.nextion_status:108]: Is detected: YES
[21:44:15][D][script.nextion_status:109]: Is setup: YES
[21:44:15][D][script.nextion_status:110]: Queue size: 0
[21:44:15][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[21:44:15][D][script.set_baud_rate:3022]: Baud rate changing from 2400 to 115200 bps
[21:44:15][D][script.set_baud_rate:3023]: Flush UART
[21:44:15][D][script.set_baud_rate:3029]: Sending instruction 'baud=115200' to Nextion
[21:44:15][D][script.set_baud_rate:3031]: Flush UART
[21:44:15][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 115200 bps
[21:44:15][C][uart.idf:153]: UART 0 was reloaded.
[21:44:15][C][uart.idf:159]: UART Bus 0:
[21:44:15][C][uart.idf:160]: TX Pin: GPIO16
[21:44:15][C][uart.idf:161]: RX Pin: GPIO17
[21:44:15][C][uart.idf:163]: RX Buffer Size: 256
[21:44:15][C][uart.idf:165]: Baud Rate: 115200 baud
[21:44:15][C][uart.idf:166]: Data Bits: 8
[21:44:15][C][uart.idf:167]: Parity: NONE
[21:44:15][C][uart.idf:168]: Stop bits: 1
[21:44:15][D][script.set_baud_rate:3040]: Current baud rate: 115200 bps
[21:44:15][W][component:237]: Component script took a long time for an operation (52 ms).
[21:44:15][W][component:238]: Components should block for at most 30 ms.
[21:44:17][D][main:403]: Attempting to upload TFT
[21:44:17][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 115200 bps
[21:44:17][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[21:44:20][D][sensor:094]: 'ntc_source': Sending state 1.59983 V with 2 decimals of accuracy
[21:44:20][D][resistance:039]: 'resistance_sensor' - Resistance 10539.0Ω
[21:44:20][D][sensor:094]: 'resistance_sensor': Sending state 10539.04590 Ω with 1 decimals of accuracy
[21:44:20][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:44:20][D][sensor:094]: 'Temperature': Sending state 23.82312 °C with 1 decimals of accuracy
[21:44:20][D][climate:396]: 'Thermostat' - Sending state:
[21:44:20][D][climate:399]: Mode: OFF
[21:44:20][D][climate:401]: Action: OFF
[21:44:20][D][climate:419]: Current Temperature: 23.82°C
[21:44:20][D][climate:425]: Target Temperature: 18.00°C
[21:44:29][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[21:44:29][D][nextion.upload.idf:157]: Nextion TFT upload requested
[21:44:29][D][nextion.upload.idf:158]: Exit reparse: NO
[21:44:29][D][nextion.upload.idf:159]: URL: https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/v4.3.12/hmi/nspanel_eu.tft
[21:44:29][D][nextion.upload.idf:188]: Baud rate: 115200
[21:44:30][D][nextion.upload.idf:235]: TFT file size: 7610000 bytes
[21:44:30][D][nextion.upload.idf:248]: Uploading Nextion
[21:44:35][D][nextion.upload.idf:287]: Upgrade response is [] - 0 byte(s)
[21:44:35][E][nextion.upload.idf:293]: Preparation for TFT upload failed 0 ""
[21:44:35][D][nextion.upload.idf:294]: Close HTTP connection
[21:44:35][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[21:44:35][E][nextion.upload.idf:358]: Nextion TFT upload failed
[21:44:35][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[21:44:35][W][component:237]: Component script took a long time for an operation (6758 ms).
[21:44:35][W][component:238]: Components should block for at most 30 ms.
[21:44:35][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 115200 bps returned: NO
[21:44:35][D][sensor:094]: 'ntc_source': Sending state 1.59900 V with 2 decimals of accuracy
[21:44:35][D][resistance:039]: 'resistance_sensor' - Resistance 10528.4Ω
[21:44:35][D][sensor:094]: 'resistance_sensor': Sending state 10528.39551 Ω with 1 decimals of accuracy
[21:44:35][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:44:35][D][sensor:094]: 'Temperature': Sending state 23.84570 °C with 1 decimals of accuracy
[21:44:35][D][climate:396]: 'Thermostat' - Sending state:
[21:44:35][D][climate:399]: Mode: OFF
[21:44:35][D][climate:401]: Action: OFF
[21:44:35][D][climate:419]: Current Temperature: 23.85°C
[21:44:35][D][climate:425]: Target Temperature: 18.00°C
[21:44:40][D][sensor:094]: 'ntc_source': Sending state 1.60017 V with 2 decimals of accuracy
[21:44:40][D][resistance:039]: 'resistance_sensor' - Resistance 10543.3Ω
[21:44:40][D][sensor:094]: 'resistance_sensor': Sending state 10543.30859 Ω with 1 decimals of accuracy
[21:44:40][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:44:40][D][sensor:094]: 'Temperature': Sending state 23.81409 °C with 1 decimals of accuracy
[21:44:40][D][climate:396]: 'Thermostat' - Sending state:
[21:44:40][D][climate:399]: Mode: OFF
[21:44:40][D][climate:401]: Action: OFF
[21:44:40][D][climate:419]: Current Temperature: 23.81°C
[21:44:40][D][climate:425]: Target Temperature: 18.00°C
[21:44:40][D][main:403]: Attempting to upload TFT
[21:44:40][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #2 at 115200 bps
[21:44:40][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[21:44:42][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[21:44:42][D][nextion.upload.idf:157]: Nextion TFT upload requested
[21:44:42][D][nextion.upload.idf:158]: Exit reparse: NO
[21:44:42][D][nextion.upload.idf:159]: URL: https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/v4.3.12/hmi/nspanel_eu.tft
[21:44:42][D][nextion.upload.idf:188]: Baud rate: 115200
[21:44:43][D][nextion.upload.idf:235]: TFT file size: 7610000 bytes
[21:44:43][D][nextion.upload.idf:248]: Uploading Nextion
[21:44:49][D][nextion.upload.idf:287]: Upgrade response is [] - 0 byte(s)
[21:44:49][E][nextion.upload.idf:293]: Preparation for TFT upload failed 0 ""
[21:44:49][D][nextion.upload.idf:294]: Close HTTP connection
[21:44:49][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[21:44:49][E][nextion.upload.idf:358]: Nextion TFT upload failed
[21:44:49][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[21:44:49][W][component:237]: Component script took a long time for an operation (6164 ms).
[21:44:49][W][component:238]: Components should block for at most 30 ms.

slangpetter · 2024-11-11T20:50:33Z

It just don´t start the upload

[21:47:32][C][rtttl:029]: Rtttl
[21:47:32][C][nextion:138]: Nextion:
[21:47:32][C][nextion:142]: Device Model: NX4832F035_011C
[21:47:32][C][nextion:143]: Firmware Version: 110
[21:47:32][C][nextion:144]: Serial Number: D9B334017B606E50
[21:47:32][C][nextion:145]: Flash Size: 16777216
[21:47:32][C][nextion:147]: Wake On Touch: YES
[21:47:32][C][nextion:148]: Exit reparse: YES
[21:47:32][C][factory_reset.button:011]: Factory Reset Button 'Factory reset'
[21:47:32][C][factory_reset.button:011]: Icon: 'mdi:restart-alert'
[21:47:32][C][restart.button:017]: Restart Button 'Restart'
[21:47:32][C][restart.button:017]: Icon: 'mdi:restart'
[21:47:32][C][adc:097]: ADC Sensor 'ntc_source'
[21:47:32][C][adc:097]: Device Class: 'voltage'
[21:47:32][C][adc:097]: State Class: 'measurement'
[21:47:32][C][adc:097]: Unit of Measurement: 'V'
[21:47:32][C][adc:097]: Accuracy Decimals: 2
[21:47:32][C][adc:107]: Pin: GPIO38
[21:47:32][C][adc:122]: Attenuation: 12db
[21:47:32][C][adc:141]: Samples: 4
[21:47:32][C][adc:142]: Update Interval: 10.0s
[21:47:32][C][resistance:010]: Resistance Sensor 'resistance_sensor'
[21:47:32][C][resistance:010]: State Class: 'measurement'
[21:47:32][C][resistance:010]: Unit of Measurement: 'Ω'
[21:47:32][C][resistance:010]: Accuracy Decimals: 1
[21:47:32][C][resistance:010]: Icon: 'mdi:flash'
[21:47:32][C][resistance:011]: Configuration: DOWNSTREAM
[21:47:32][C][resistance:012]: Resistor: 11200.00Ω
[21:47:32][C][resistance:013]: Reference Voltage: 3.3V
[21:47:32][C][ntc:014]: NTC Sensor 'Temperature'
[21:47:32][C][ntc:014]: Device Class: 'temperature'
[21:47:32][C][ntc:014]: State Class: 'measurement'
[21:47:32][C][ntc:014]: Unit of Measurement: '°C'
[21:47:32][C][ntc:014]: Accuracy Decimals: 1
[21:47:32][C][thermostat.climate:1296]: Thermostat 'Thermostat'
[21:47:32][C][thermostat.climate:1301]: Start-up Delay Enabled: NO
[21:47:32][C][thermostat.climate:1317]: Heating Parameters:
[21:47:32][C][thermostat.climate:1318]: Deadband: 0.5°C
[21:47:32][C][thermostat.climate:1319]: Overrun: 0.5°C
[21:47:32][C][thermostat.climate:1326]: Minimum Off Time: 300s
[21:47:32][C][thermostat.climate:1328]: Minimum Run Time: 300s
[21:47:32][C][thermostat.climate:1343]: Minimum Idle Time: 30s
[21:47:32][C][thermostat.climate:1344]: Supports AUTO: NO
[21:47:32][C][thermostat.climate:1345]: Supports HEAT/COOL: NO
[21:47:32][C][thermostat.climate:1346]: Supports COOL: NO
[21:47:32][C][thermostat.climate:1347]: Supports DRY: NO
[21:47:32][C][thermostat.climate:1348]: Supports FAN_ONLY: NO
[21:47:32][C][thermostat.climate:1350]: Supports FAN_ONLY_ACTION_USES_FAN_MODE_TIMER: NO
[21:47:32][C][thermostat.climate:1351]: Supports FAN_ONLY_COOLING: NO
[21:47:32][C][thermostat.climate:1356]: Supports FAN_WITH_HEATING: NO
[21:47:32][C][thermostat.climate:1358]: Supports HEAT: YES
[21:47:32][C][thermostat.climate:1359]: Supports FAN MODE ON: NO
[21:47:32][C][thermostat.climate:1360]: Supports FAN MODE OFF: NO
[21:47:32][C][thermostat.climate:1361]: Supports FAN MODE AUTO: NO
[21:47:32][C][thermostat.climate:1362]: Supports FAN MODE LOW: NO
[21:47:32][C][thermostat.climate:1363]: Supports FAN MODE MEDIUM: NO
[21:47:32][C][thermostat.climate:1364]: Supports FAN MODE HIGH: NO
[21:47:32][C][thermostat.climate:1365]: Supports FAN MODE MIDDLE: NO
[21:47:32][C][thermostat.climate:1366]: Supports FAN MODE FOCUS: NO
[21:47:32][C][thermostat.climate:1367]: Supports FAN MODE DIFFUSE: NO
[21:47:32][C][thermostat.climate:1368]: Supports FAN MODE QUIET: NO
[21:47:32][C][thermostat.climate:1369]: Supports SWING MODE BOTH: NO
[21:47:32][C][thermostat.climate:1370]: Supports SWING MODE OFF: NO
[21:47:32][C][thermostat.climate:1371]: Supports SWING MODE HORIZONTAL: NO
[21:47:32][C][thermostat.climate:1372]: Supports SWING MODE VERTICAL: NO
[21:47:32][C][thermostat.climate:1373]: Supports TWO SET POINTS: NO
[21:47:32][C][thermostat.climate:1375]: Supported PRESETS:
[21:47:32][C][thermostat.climate:1379]: Supports HOME: YES
[21:47:32][C][thermostat.climate:963]: HOME Is Default: NO
[21:47:32][C][thermostat.climate:970]: HOME Default Target Temperature Low: 18.0°C
[21:47:32][C][thermostat.climate:984]: HOME Default Mode: HEAT
[21:47:32][C][thermostat.climate:1383]: Supported CUSTOM PRESETS:
[21:47:32][C][thermostat.climate:1387]: Supports Off: YES
[21:47:32][C][thermostat.climate:963]: Off Is Default: YES
[21:47:32][C][thermostat.climate:970]: Off Default Target Temperature Low: 18.0°C
[21:47:32][C][thermostat.climate:984]: Off Default Mode: OFF
[21:47:32][C][thermostat.climate:1391]: On boot, restore from: MEMORY
[21:47:32][C][homeassistant.time:010]: Home Assistant Time:
[21:47:32][C][homeassistant.time:011]: Timezone: 'CET-1CEST,M3.5.0,M10.5.0/3'
[21:47:32][D][script.timer_page:3261]: Fallback to page Home
[21:47:33][C][mdns:116]: mDNS:
[21:47:33][C][mdns:117]: Hostname: nslekrum2
[21:47:33][C][esphome.ota:073]: Over-The-Air updates:
[21:47:33][C][esphome.ota:074]: Address: nslekrum2.local:3232
[21:47:33][C][esphome.ota:075]: Version: 2
[21:47:33][C][esphome.ota:078]: Password configured
[21:47:33][C][safe_mode:018]: Safe Mode:
[21:47:33][C][safe_mode:020]: Boot considered successful after 60 seconds
[21:47:33][C][safe_mode:021]: Invoke after 3 boot attempts
[21:47:33][C][safe_mode:023]: Remain in safe mode for 180 seconds
[21:47:33][C][api:140]: API Server:
[21:47:33][C][api:141]: Address: nslekrum2.local:6053
[21:47:33][C][api:143]: Using noise encryption: YES
[21:47:33][C][wifi_signal.sensor:010]: WiFi Signal 'RSSI'
[21:47:33][C][wifi_signal.sensor:010]: Device Class: 'signal_strength'
[21:47:33][C][wifi_signal.sensor:010]: State Class: 'measurement'
[21:47:33][C][wifi_signal.sensor:010]: Unit of Measurement: 'dBm'
[21:47:33][C][wifi_signal.sensor:010]: Accuracy Decimals: 0
[21:47:33][C][wifi_signal.sensor:010]: Icon: 'mdi:wifi'
[21:47:35][D][text_sensor:064]: 'Device Name': Sending state 'nslekrum2'
[21:47:40][D][sensor:094]: 'ntc_source': Sending state 1.59817 V with 2 decimals of accuracy
[21:47:40][D][resistance:039]: 'resistance_sensor' - Resistance 10517.8Ω
[21:47:40][D][sensor:094]: 'resistance_sensor': Sending state 10517.75781 Ω with 1 decimals of accuracy
[21:47:40][D][ntc:026]: 'Temperature' - Temperature: 23.9°C
[21:47:40][D][sensor:094]: 'Temperature': Sending state 23.86827 °C with 1 decimals of accuracy
[21:47:40][D][climate:396]: 'Thermostat' - Sending state:
[21:47:40][D][climate:399]: Mode: OFF
[21:47:40][D][climate:401]: Action: OFF
[21:47:40][D][climate:419]: Current Temperature: 23.87°C
[21:47:40][D][climate:425]: Target Temperature: 18.00°C
[21:47:41][C][nspanel_ha_blueprint:2224]: Wi-Fi: Excellent (-45 dBm)
[21:47:41][C][nspanel_ha_blueprint:2235]: API: Connected
[21:47:41][C][nspanel_ha_blueprint:2243]: Blueprint:
[21:47:41][C][nspanel_ha_blueprint:2245]: Version: 4.3.12
[21:47:41][C][nspanel_ha_blueprint:2246]: Init steps: 62 (100.0%)
[21:47:41][C][nspanel_ha_blueprint:2255]: ESPHome:
[21:47:41][C][nspanel_ha_blueprint:2256]: Version: 4.3.12
[21:47:41][C][nspanel_ha_blueprint:2257]: Compiler: 2024.10.3
[21:47:41][C][nspanel_ha_blueprint:2262]: Framework: ESP-IDF
[21:47:41][C][nspanel_ha_blueprint:2267]: Free heap:
[21:47:41][C][nspanel_ha_blueprint:2271]: Internal: 193800 bytes (55.2%)
[21:47:41][C][nspanel_ha_blueprint:2281]: PSRAM: 2002807 bytes (96.0%)
[21:47:41][C][nspanel_ha_blueprint:2288]: UART:
[21:47:41][C][nspanel_ha_blueprint:2289]: Baud rate: 115200 bps
[21:47:41][C][nspanel_ha_blueprint:2290]: Queue size: 0
[21:47:41][C][nspanel_ha_blueprint:2294]: Nextion:
[21:47:41][C][nspanel_ha_blueprint:2295]: Queue size: 31
[21:47:41][C][nspanel_ha_blueprint:2297]: Is setup: True
[21:47:41][C][nspanel_ha_blueprint:2304]: Init: True
[21:47:41][W][nspanel_ha_blueprint:2308]: TFT: UNKNOWN
[21:47:41][C][nspanel_ha_blueprint:2311]: Packages:
[21:47:41][C][nspanel_ha_blueprint:2313]: - Core
[21:47:41][C][nspanel_ha_blueprint:2322]: - Upload TFT
[21:47:41][C][nspanel_ha_blueprint:2325]: - Climate - Base
[21:47:41][C][nspanel_ha_blueprint:2334]: - Climate - Heat
[21:47:41][C][nspanel_ha_blueprint:097]: Add-on Upload TFT:
[21:47:41][C][nspanel_ha_blueprint:098]: File model: NSPanel EU
[21:47:41][C][nspanel_ha_blueprint:099]: Valid TFT: NO
[21:47:41][C][nspanel_ha_blueprint:133]: Add-on climate:
[21:47:41][C][nspanel_ha_blueprint:142]: Heat: Enabled
[21:47:41][E][nspanel_ha_blueprint:146]: Relay: 0
[21:47:41][W][component:237]: Component script took a long time for an operation (67 ms).
[21:47:41][W][component:238]: Components should block for at most 30 ms.
[21:47:46][D][button:010]: 'Update TFT display' Pressed.
[21:47:48][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[21:47:50][D][sensor:094]: 'ntc_source': Sending state 1.59933 V with 2 decimals of accuracy
[21:47:50][D][resistance:039]: 'resistance_sensor' - Resistance 10532.7Ω
[21:47:50][D][sensor:094]: 'resistance_sensor': Sending state 10532.65332 Ω with 1 decimals of accuracy
[21:47:50][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:47:50][D][sensor:094]: 'Temperature': Sending state 23.83667 °C with 1 decimals of accuracy
[21:47:50][D][climate:396]: 'Thermostat' - Sending state:
[21:47:50][D][climate:399]: Mode: OFF
[21:47:50][D][climate:401]: Action: OFF
[21:47:50][D][climate:419]: Current Temperature: 23.84°C
[21:47:50][D][climate:425]: Target Temperature: 18.00°C
[21:47:52][D][addon_upload_tft.script.report_upload_progress:158]: Set Nextion unavailable for blueprint calls
[21:47:52][D][binary_sensor:036]: 'Nextion display': Sending state OFF
[21:47:52][D][addon_upload_tft.script.report_upload_progress:158]: Preparing for upload...
[21:47:52][D][script.nextion_status:107]: Nextion status:
[21:47:52][D][script.nextion_status:108]: Is detected: YES
[21:47:52][D][script.nextion_status:109]: Is setup: YES
[21:47:52][D][script.nextion_status:110]: Queue size: 40
[21:47:52][D][addon_upload_tft.script.upload_tft:220]: Starting the upload script
[21:47:52][D][addon_upload_tft.script.upload_tft:221]: Valid TFT: NO
[21:47:52][D][addon_upload_tft.script.upload_tft:222]: Current baud rate: 115200 bps
[21:47:52][D][addon_upload_tft.script.upload_tft:223]: Target upload baud rate: 115200 bps
[21:47:52][D][addon_upload_tft.script.upload_tft:224]: Upload URL: https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/v4.3.12/hmi/nspanel_eu.tft
[21:47:54][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[21:47:58][D][addon_upload_tft.script.report_upload_progress:158]: Stopping other scripts
[21:47:58][D][script.nextion_status:107]: Nextion status:
[21:47:58][D][script.nextion_status:108]: Is detected: YES
[21:47:58][D][script.nextion_status:109]: Is setup: YES
[21:47:58][D][script.nextion_status:110]: Queue size: 42
[21:47:58][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[21:48:00][D][main:403]: Attempting to upload TFT
[21:48:00][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 115200 bps
[21:48:00][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[21:48:00][D][sensor:094]: 'ntc_source': Sending state 1.60083 V with 2 decimals of accuracy
[21:48:00][D][resistance:039]: 'resistance_sensor' - Resistance 10551.8Ω
[21:48:00][D][sensor:094]: 'resistance_sensor': Sending state 10551.83887 Ω with 1 decimals of accuracy
[21:48:00][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:48:00][D][sensor:094]: 'Temperature': Sending state 23.79604 °C with 1 decimals of accuracy
[21:48:00][D][climate:396]: 'Thermostat' - Sending state:
[21:48:00][D][climate:399]: Mode: OFF
[21:48:00][D][climate:401]: Action: OFF
[21:48:00][D][climate:419]: Current Temperature: 23.80°C
[21:48:00][D][climate:425]: Target Temperature: 18.00°C
[21:48:10][D][sensor:094]: 'ntc_source': Sending state 1.60133 V with 2 decimals of accuracy
[21:48:10][D][resistance:039]: 'resistance_sensor' - Resistance 10558.2Ω
[21:48:10][D][sensor:094]: 'resistance_sensor': Sending state 10558.24121 Ω with 1 decimals of accuracy
[21:48:10][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:48:10][D][sensor:094]: 'Temperature': Sending state 23.78250 °C with 1 decimals of accuracy
[21:48:10][D][climate:396]: 'Thermostat' - Sending state:
[21:48:10][D][climate:399]: Mode: OFF
[21:48:10][D][climate:401]: Action: OFF
[21:48:10][D][climate:419]: Current Temperature: 23.78°C
[21:48:10][D][climate:425]: Target Temperature: 18.00°C
[21:48:12][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[21:48:12][D][nextion.upload.idf:157]: Nextion TFT upload requested
[21:48:12][D][nextion.upload.idf:158]: Exit reparse: NO
[21:48:12][D][nextion.upload.idf:159]: URL: https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/v4.3.12/hmi/nspanel_eu.tft
[21:48:12][D][nextion.upload.idf:188]: Baud rate: 115200
[21:48:12][D][nextion.upload.idf:235]: TFT file size: 7610000 bytes
[21:48:12][D][nextion.upload.idf:248]: Uploading Nextion
[21:48:18][D][nextion.upload.idf:287]: Upgrade response is [] - 0 byte(s)
[21:48:18][E][nextion.upload.idf:293]: Preparation for TFT upload failed 0 ""
[21:48:18][D][nextion.upload.idf:294]: Close HTTP connection
[21:48:18][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[21:48:18][E][nextion.upload.idf:358]: Nextion TFT upload failed
[21:48:18][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[21:48:18][W][component:237]: Component script took a long time for an operation (6184 ms).
[21:48:18][W][component:238]: Components should block for at most 30 ms.
[21:48:18][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 115200 bps returned: NO
[21:48:20][D][sensor:094]: 'ntc_source': Sending state 1.60233 V with 2 decimals of accuracy
[21:48:20][D][resistance:039]: 'resistance_sensor' - Resistance 10571.1Ω
[21:48:20][D][sensor:094]: 'resistance_sensor': Sending state 10571.05957 Ω with 1 decimals of accuracy
[21:48:20][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:48:20][D][sensor:094]: 'Temperature': Sending state 23.75542 °C with 1 decimals of accuracy
[21:48:20][D][climate:396]: 'Thermostat' - Sending state:
[21:48:20][D][climate:399]: Mode: OFF
[21:48:20][D][climate:401]: Action: OFF
[21:48:20][D][climate:419]: Current Temperature: 23.76°C
[21:48:20][D][climate:425]: Target Temperature: 18.00°C
[21:48:21][D][sensor:094]: 'RSSI': Sending state -46.00000 dBm with 0 decimals of accuracy
[21:48:23][D][main:403]: Attempting to upload TFT
[21:48:23][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #2 at 115200 bps
[21:48:23][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[21:48:25][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[21:48:25][D][nextion.upload.idf:157]: Nextion TFT upload requested
[21:48:25][D][nextion.upload.idf:158]: Exit reparse: NO
[21:48:25][D][nextion.upload.idf:159]: URL: https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/v4.3.12/hmi/nspanel_eu.tft
[21:48:25][D][nextion.upload.idf:188]: Baud rate: 115200
[21:48:26][D][nextion.upload.idf:235]: TFT file size: 7610000 bytes
[21:48:26][D][nextion.upload.idf:248]: Uploading Nextion
[21:48:32][D][nextion.upload.idf:287]: Upgrade response is [] - 0 byte(s)
[21:48:32][E][nextion.upload.idf:293]: Preparation for TFT upload failed 0 ""
[21:48:32][D][nextion.upload.idf:294]: Close HTTP connection
[21:48:32][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[21:48:32][E][nextion.upload.idf:358]: Nextion TFT upload failed
[21:48:32][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[21:48:32][W][component:237]: Component script took a long time for an operation (7062 ms).
[21:48:32][W][component:238]: Components should block for at most 30 ms.
[21:48:32][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #2 at 115200 bps returned: NO
[21:48:32][D][esp32.preferences:114]: Saving 1 preferences to flash...
[21:48:32][D][esp32.preferences:143]: Saving 1 preferences to flash: 1 cached, 0 written, 0 failed
[21:48:32][D][sensor:094]: 'ntc_source': Sending state 1.60167 V with 2 decimals of accuracy
[21:48:32][D][resistance:039]: 'resistance_sensor' - Resistance 10562.5Ω
[21:48:32][D][sensor:094]: 'resistance_sensor': Sending state 10562.51172 Ω with 1 decimals of accuracy
[21:48:32][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:48:32][D][sensor:094]: 'Temperature': Sending state 23.77347 °C with 1 decimals of accuracy
[21:48:32][D][climate:396]: 'Thermostat' - Sending state:
[21:48:32][D][climate:399]: Mode: OFF
[21:48:32][D][climate:401]: Action: OFF
[21:48:32][D][climate:419]: Current Temperature: 23.77°C
[21:48:32][D][climate:425]: Target Temperature: 18.00°C
[21:48:35][D][text_sensor:064]: 'Device Name': Sending state 'nslekrum2'
[21:48:37][D][addon_upload_tft.script.report_upload_progress:158]: Restarting Nextion display
[21:48:37][D][switch:016]: 'Nextion display - Power' Turning OFF.
[21:48:37][D][switch:055]: 'Nextion display - Power': Sending state OFF
[21:48:39][D][switch:012]: 'Nextion display - Power' Turning ON.
[21:48:39][D][switch:055]: 'Nextion display - Power': Sending state ON
[21:48:40][D][sensor:094]: 'ntc_source': Sending state 1.60183 V with 2 decimals of accuracy
[21:48:40][D][resistance:039]: 'resistance_sensor' - Resistance 10564.6Ω
[21:48:40][D][sensor:094]: 'resistance_sensor': Sending state 10564.64746 Ω with 1 decimals of accuracy
[21:48:40][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:48:40][D][sensor:094]: 'Temperature': Sending state 23.76896 °C with 1 decimals of accuracy
[21:48:40][D][climate:396]: 'Thermostat' - Sending state:
[21:48:40][D][climate:399]: Mode: OFF
[21:48:40][D][climate:401]: Action: OFF
[21:48:40][D][climate:419]: Current Temperature: 23.77°C
[21:48:40][D][climate:425]: Target Temperature: 18.00°C
[21:48:44][D][script.nextion_status:107]: Nextion status:
[21:48:44][D][script.nextion_status:108]: Is detected: YES
[21:48:44][D][script.nextion_status:109]: Is setup: YES
[21:48:44][D][script.nextion_status:110]: Queue size: 0
[21:48:44][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[21:48:46][D][main:403]: Attempting to upload TFT
[21:48:46][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #3 at 115200 bps
[21:48:46][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[21:48:48][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[21:48:48][D][nextion.upload.idf:157]: Nextion TFT upload requested
[21:48:48][D][nextion.upload.idf:158]: Exit reparse: NO
[21:48:48][D][nextion.upload.idf:159]: URL: https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/v4.3.12/hmi/nspanel_eu.tft
[21:48:48][D][nextion.upload.idf:188]: Baud rate: 115200
[21:48:49][D][nextion.upload.idf:235]: TFT file size: 7610000 bytes
[21:48:49][D][nextion.upload.idf:248]: Uploading Nextion
[21:48:54][D][nextion.upload.idf:287]: Upgrade response is [] - 0 byte(s)
[21:48:54][E][nextion.upload.idf:293]: Preparation for TFT upload failed 0 ""
[21:48:54][D][nextion.upload.idf:294]: Close HTTP connection
[21:48:54][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[21:48:54][E][nextion.upload.idf:358]: Nextion TFT upload failed
[21:48:54][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[21:48:54][W][component:237]: Component script took a long time for an operation (6240 ms).
[21:48:54][W][component:238]: Components should block for at most 30 ms.
[21:48:54][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #3 at 115200 bps returned: NO
[21:48:54][D][sensor:094]: 'ntc_source': Sending state 1.60150 V with 2 decimals of accuracy
[21:48:54][D][resistance:039]: 'resistance_sensor' - Resistance 10560.4Ω
[21:48:54][D][sensor:094]: 'resistance_sensor': Sending state 10560.37695 Ω with 1 decimals of accuracy
[21:48:54][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:48:54][D][sensor:094]: 'Temperature': Sending state 23.77798 °C with 1 decimals of accuracy
[21:48:54][D][climate:396]: 'Thermostat' - Sending state:
[21:48:54][D][climate:399]: Mode: OFF
[21:48:54][D][climate:401]: Action: OFF
[21:48:59][D][main:403]: Attempting to upload TFT
[21:48:59][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #4 at 115200 bps
[21:48:59][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[21:49:00][D][sensor:094]: 'ntc_source': Sending state 1.60133 V with 2 decimals of accuracy
[21:49:00][D][resistance:039]: 'resistance_sensor' - Resistance 10558.2Ω
[21:49:00][D][sensor:094]: 'resistance_sensor': Sending state 10558.24414 Ω with 1 decimals of accuracy
[21:49:00][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:49:00][D][sensor:094]: 'Temperature': Sending state 23.78249 °C with 1 decimals of accuracy
[21:49:00][D][climate:396]: 'Thermostat' - Sending state:
[21:49:00][D][climate:399]: Mode: OFF
[21:49:00][D][climate:401]: Action: OFF
[21:49:00][D][climate:419]: Current Temperature: 23.78°C
[21:49:00][D][climate:425]: Target Temperature: 18.00°C
[21:49:01][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[21:49:01][D][nextion.upload.idf:157]: Nextion TFT upload requested
[21:49:01][D][nextion.upload.idf:158]: Exit reparse: NO
[21:49:01][D][nextion.upload.idf:159]: URL: https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/v4.3.12/hmi/nspanel_eu.tft
[21:49:01][D][nextion.upload.idf:188]: Baud rate: 115200
[21:49:02][D][nextion.upload.idf:235]: TFT file size: 7610000 bytes
[21:49:02][D][nextion.upload.idf:248]: Uploading Nextion
[21:49:08][D][nextion.upload.idf:287]: Upgrade response is [] - 0 byte(s)
[21:49:08][E][nextion.upload.idf:293]: Preparation for TFT upload failed 0 ""
[21:49:08][D][nextion.upload.idf:294]: Close HTTP connection
[21:49:08][D][nextion.upload.idf:342]: Nextion TFT upload finished: NO
[21:49:08][E][nextion.upload.idf:358]: Nextion TFT upload failed
[21:49:08][D][addon_upload_tft.script.nextion_upload:128]: TFT upload: NO
[21:49:08][W][component:237]: Component script took a long time for an operation (6290 ms).
[21:49:08][W][component:238]: Components should block for at most 30 ms.
[21:49:08][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #4 at 115200 bps returned: NO
[21:49:10][D][sensor:094]: 'ntc_source': Sending state 1.60167 V with 2 decimals of accuracy
[21:49:10][D][resistance:039]: 'resistance_sensor' - Resistance 10562.5Ω
[21:49:10][D][sensor:094]: 'resistance_sensor': Sending state 10562.51172 Ω with 1 decimals of accuracy
[21:49:10][D][ntc:026]: 'Temperature' - Temperature: 23.8°C
[21:49:10][D][sensor:094]: 'Temperature': Sending state 23.77347 °C with 1 decimals of accuracy
[21:49:10][D][climate:396]: 'Thermostat' - Sending state:
[21:49:10][D][climate:399]: Mode: OFF
[21:49:10][D][climate:401]: Action: OFF
[21:49:10][D][climate:419]: Current Temperature: 23.77°C
[21:49:10][D][climate:425]: Target Temperature: 18.00°C
[21:49:13][D][addon_upload_tft.script.report_upload_progress:158]: TFT upload failed
[21:49:13][D][addon_upload_tft.script.report_upload_progress:158]: Turn off Nextion and restart ESPHome
[21:49:13][D][switch:016]: 'Nextion display - Power' Turning OFF.
[21:49:13][D][switch:055]: 'Nextion display - Power': Sending state OFF

slangpetter · 2024-11-11T20:51:57Z

Could it be a power problem? I´we tryed with a nother powersource so it sholuden´t be that...

slangpetter · 2024-11-11T20:55:24Z

Oh well, thank you Sir for all the help!!! I think I´l order a cople more and thow this one in the bin! ;)
Keep up the good work!!

edwardtfn · 2024-11-11T21:20:41Z

Your panel is responding at 115200bps:

[21:47:41][C][nspanel_ha_blueprint:2288]: UART:
[21:47:41][C][nspanel_ha_blueprint:2289]: Baud rate: 115200 bps
[21:47:41][C][nspanel_ha_blueprint:2290]: Queue size: 0
[21:47:41][C][nspanel_ha_blueprint:2294]: Nextion:
[21:47:41][C][nspanel_ha_blueprint:2295]: Queue size: 31
[21:47:41][C][nspanel_ha_blueprint:2297]: Is setup: True

Try everything to 115200bps and try again. This is default.

I don't think this file size is correct. Do you have any restriction in your network to prevent your panel accessing the Internet?


[21:49:01][D][nextion.upload.idf:159]: URL: https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/v4.3.12/hmi/nspanel_eu.tft
[21:49:01][D][nextion.upload.idf:188]: Baud rate: 115200
[21:49:02][D][nextion.upload.idf:235]: TFT file size: 7610000 bytes

By the way, before giving up, try setting the framework to Arduino and try the upload again.
Just add this to your panel's yaml:

esp32:
  framework:
    type: arduino

shruxx · 2024-11-19T10:10:39Z

Hi, I have the same issue. I updated ESPHome and after that updated the panel wirelessly to the latest version. After that, the error Nextion reported variable name invalid! came up and the device has only the clock shown and one button is working. I tried to re-enroll the original tft upload file from my host, but it didn't work. Now it is running the latest version again. Is there a way to fix it?
Home Assistant gives me the following: Die Automatisierung „nspaneldiele“ (automation.nspaneldiele) hat eine unbekannte Aktion: esphome.nspaneldiele_page_home.

EDIT: right now I tried to flash the panel wirelessly with nspanel_blanktft, which was successfully done. But I don't know why the panel only shows the clock and nothing else.

[11:05:58][I][app:100]: ESPHome version 2024.10.3 compiled on Nov 19 2024, 10:44:39
[11:05:58][I][app:102]: Project esphome.NSPanel_HA_Blueprint version 4.3.12
[11:05:58][C][wifi:600]: WiFi:
[11:05:58][C][wifi:428]:   Local MAC: 48:E7:29:C1:C9:A8
[11:05:58][C][wifi:433]:   SSID: [redacted]
[11:05:58][C][wifi:436]:   IP Address: 192.168.1.8
[11:05:58][C][wifi:440]:   BSSID: [redacted]
[11:05:58][C][wifi:441]:   Hostname: 'nspaneldiele'
[11:05:58][C][wifi:443]:   Signal strength: -49 dB ▂▄▆█
[11:05:58][C][wifi:447]:   Channel: 8
[11:05:58][C][wifi:448]:   Subnet: 255.255.255.0
[11:05:58][C][wifi:449]:   Gateway: 192.168.1.254
[11:05:58][C][wifi:450]:   DNS1: 192.168.1.254
[11:05:58][C][wifi:451]:   DNS2: 0.0.0.0
[11:05:58][C][logger:185]: Logger:
[11:05:58][C][logger:186]:   Level: DEBUG
[11:05:58][C][logger:188]:   Log Baud Rate: 0
[11:05:58][C][logger:189]:   Hardware UART: UART0
[11:05:58][C][uart.idf:159]: UART Bus 0:
[11:05:58][C][uart.idf:160]:   TX Pin: GPIO16
[11:05:58][C][uart.idf:161]:   RX Pin: GPIO17
[11:05:58][C][uart.idf:163]:   RX Buffer Size: 256
[11:05:58][C][uart.idf:165]:   Baud Rate: 115200 baud
[11:05:58][C][uart.idf:166]:   Data Bits: 8
[11:05:58][C][uart.idf:167]:   Parity: NONE
[11:05:58][C][uart.idf:168]:   Stop bits: 1
[11:05:58][C][ledc.output:180]: LEDC Output:
[11:05:58][C][ledc.output:181]:   Pin GPIO21
[11:05:58][C][ledc.output:182]:   LEDC Channel: 0
[11:05:58][C][ledc.output:183]:   PWM Frequency: 1000.0 Hz
[11:05:58][C][ledc.output:184]:   Phase angle: 0.0°
[11:05:58][C][ledc.output:185]:   Bit depth: 16
[11:05:58][C][template.binary_sensor:028]: Template Binary Sensor 'Nextion display'
[11:05:58][C][template.binary_sensor:028]:   Device Class: 'connectivity'
[11:05:58][C][template.number:050]: Template Number 'Display Brightness'
[11:05:58][C][template.number:050]:   Unit of Measurement: '%'
[11:05:58][C][template.number:051]:   Optimistic: YES
[11:05:58][C][template.number:052]:   Update Interval: 60.0s
[11:05:58][C][template.number:050]: Template Number 'Display Brightness Dimdown'
[11:05:58][C][template.number:050]:   Unit of Measurement: '%'
[11:05:58][C][template.number:051]:   Optimistic: YES
[11:05:58][C][template.number:052]:   Update Interval: 60.0s
[11:05:58][C][template.number:050]: Template Number 'Display Brightness Sleep'
[11:05:58][C][template.number:050]:   Unit of Measurement: '%'
[11:05:58][C][template.number:051]:   Optimistic: YES
[11:05:58][C][template.number:052]:   Update Interval: 60.0s
[11:05:58][C][template.number:050]: Template Number 'Temperature Correction'
[11:05:58][C][template.number:050]:   Unit of Measurement: '°C'
[11:05:58][C][template.number:051]:   Optimistic: YES
[11:05:58][C][template.number:052]:   Update Interval: 60.0s
[11:05:58][C][template.number:050]: Template Number 'Timeout Page'
[11:05:58][C][template.number:050]:   Icon: 'mdi:timer'
[11:05:58][C][template.number:050]:   Unit of Measurement: 's'
[11:05:58][C][template.number:051]:   Optimistic: YES
[11:05:58][C][template.number:052]:   Update Interval: 60.0s
[11:05:58][C][template.number:050]: Template Number 'Timeout Dimming'
[11:05:58][C][template.number:050]:   Icon: 'mdi:timer'
[11:05:58][C][template.number:050]:   Unit of Measurement: 's'
[11:05:58][C][template.number:051]:   Optimistic: YES
[11:05:58][C][template.number:052]:   Update Interval: 60.0s
[11:05:58][C][template.number:050]: Template Number 'Timeout Sleep'
[11:05:58][C][template.number:050]:   Icon: 'mdi:timer'
[11:05:58][C][template.number:050]:   Unit of Measurement: 's'
[11:05:58][C][template.number:051]:   Optimistic: YES
[11:05:58][C][template.number:052]:   Update Interval: 60.0s
[11:05:58][C][template.select:065]: Template Select 'Baud rate'
[11:05:58][C][template.select:065]:   Icon: 'mdi:swap-horizontal'
[11:05:58][C][template.select:066]:   Update Interval: 60.0s
[11:05:58][C][template.select:069]:   Optimistic: YES
[11:05:58][C][template.select:070]:   Initial Option: 115200
[11:05:58][C][template.select:071]:   Restore Value: YES
[11:05:58][C][template.select:065]: Template Select 'Wake-up page'
[11:05:58][C][template.select:065]:   Icon: 'mdi:page-next-outline'
[11:05:58][C][template.select:066]:   Update Interval: 60.0s
[11:05:58][C][template.select:069]:   Optimistic: YES
[11:05:58][C][template.select:070]:   Initial Option: home
[11:05:58][C][template.select:071]:   Restore Value: YES
[11:05:58][C][template.select:065]: Template Select 'Update TFT display - Model'
[11:05:58][C][template.select:065]:   Icon: 'mdi:file-sync'
[11:05:58][C][template.select:066]:   Update Interval: 60.0s
[11:05:58][C][template.select:069]:   Optimistic: YES
[11:05:58][C][template.select:070]:   Initial Option: NSPanel EU
[11:05:58][C][template.select:071]:   Restore Value: YES
[11:05:58][C][template.select:065]: Template Select 'Update TFT display - Baud rate'
[11:05:58][C][template.select:065]:   Icon: 'mdi:swap-horizontal'
[11:05:58][C][template.select:066]:   Update Interval: 60.0s
[11:05:58][C][template.select:069]:   Optimistic: YES
[11:05:58][C][template.text_sensor:020]: Template Sensor 'Device Name'
[11:05:58][C][template.text_sensor:020]:   Icon: 'mdi:identifier'
[11:05:58][C][template.text_sensor:020]: Template Sensor 'Detailed Entity'
[11:05:58][C][template.text_sensor:020]:   Icon: 'mdi:tablet-dashboard'
[11:05:58][C][template.text_sensor:020]: Template Sensor 'Notification Label'
[11:05:58][C][template.text_sensor:020]: Template Sensor 'Notification Text'
[11:05:58][C][template.text_sensor:020]: Template Sensor 'Version Blueprint'
[11:05:58][C][template.text_sensor:020]:   Icon: 'mdi:tag-text-outline'
[11:05:58][C][template.text_sensor:020]: Template Sensor 'Version ESPHome'
[11:05:58][C][template.text_sensor:020]:   Icon: 'mdi:tag-text-outline'
[11:05:58][C][template.sensor:022]: Template Sensor 'Blueprint'
[11:05:58][C][template.sensor:022]:   State Class: ''
[11:05:58][C][template.sensor:022]:   Unit of Measurement: '%'
[11:05:58][C][template.sensor:022]:   Accuracy Decimals: 1
[11:05:58][C][template.sensor:022]:   Icon: 'mdi:link-variant'
[11:05:58][C][template.sensor:023]:   Update Interval: 60.0s
[11:05:59][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Left Button'
[11:05:59][C][gpio.binary_sensor:016]:   Pin: GPIO14
[11:05:59][C][gpio.binary_sensor:015]: GPIO Binary Sensor 'Right Button'
[11:05:59][C][gpio.binary_sensor:016]:   Pin: GPIO27
[11:05:59][C][switch.gpio:068]: GPIO Switch 'Relay 1'
[11:05:59][C][switch.gpio:091]:   Restore Mode: restore defaults to OFF
[11:05:59][C][switch.gpio:031]:   Pin: GPIO22
[11:05:59][C][switch.gpio:068]: GPIO Switch 'Relay 2'
[11:05:59][C][switch.gpio:091]:   Restore Mode: restore defaults to OFF
[11:05:59][C][switch.gpio:031]:   Pin: GPIO19
[11:05:59][C][template.switch:068]: Template Switch 'Notification unread'
[11:05:59][C][template.switch:091]:   Restore Mode: always OFF
[11:05:59][C][template.switch:057]:   Optimistic: YES
[11:05:59][C][template.switch:068]: Template Switch 'Notification sound'
[11:05:59][C][template.switch:091]:   Restore Mode: restore defaults to OFF
[11:06:00][C][template.switch:057]:   Optimistic: YES
[11:06:05][D][sensor:094]: 'ntc_source': Sending state 1.67683 V with 2 decimals of accuracy
[11:06:05][D][resistance:039]: 'resistance_sensor' - Resistance 11570.3Ω
[11:06:05][D][sensor:094]: 'resistance_sensor': Sending state 11570.30469 Ω with 1 decimals of accuracy
[11:06:05][D][ntc:026]: 'Temperature' - Temperature: 21.8°C
[11:06:05][D][sensor:094]: 'Temperature': Sending state 21.75328 °C with 1 decimals of accuracy
[11:06:08][C][nspanel_ha_blueprint:2224]: Wi-Fi:         Good (-50 dBm)
[11:06:08][C][nspanel_ha_blueprint:2235]: API:           Connected
[11:06:08][C][nspanel_ha_blueprint:2243]: Blueprint:
[11:06:08][W][nspanel_ha_blueprint:2248]:   Init steps:  0 (0.0%)
[11:06:08][W][nspanel_ha_blueprint:2249]:   State:       Pending
[11:06:08][C][nspanel_ha_blueprint:2250]: Requesting blueprint settings
[11:06:08][D][script:077]: Script 'boot_event' restarting (mode: restart)
[11:06:08][C][nspanel_ha_blueprint:2255]: ESPHome:
[11:06:08][C][nspanel_ha_blueprint:2256]:   Version:     4.3.12
[11:06:08][C][nspanel_ha_blueprint:2257]:   Compiler:    2024.10.3
[11:06:08][C][nspanel_ha_blueprint:2262]:   Framework:   ESP-IDF
[11:06:08][C][nspanel_ha_blueprint:2267]:   Free heap:
[11:06:08][C][nspanel_ha_blueprint:2271]:     Internal:   212212 bytes (60.4%)
[11:06:08][C][nspanel_ha_blueprint:2281]:     PSRAM:     1999583 bytes (95.9%)
[11:06:08][C][nspanel_ha_blueprint:2288]: UART:
[11:06:09][C][nspanel_ha_blueprint:2289]:   Baud rate:   115200 bps
[11:06:11][D][text_sensor:064]: 'Device Name': Sending state 'nspaneldiele'
[11:06:15][D][sensor:094]: 'ntc_source': Sending state 1.67800 V with 2 decimals of accuracy
[11:06:15][D][resistance:039]: 'resistance_sensor' - Resistance 11586.7Ω
[11:06:15][D][sensor:094]: 'resistance_sensor': Sending state 11586.68262 Ω with 1 decimals of accuracy
[11:06:15][D][ntc:026]: 'Temperature' - Temperature: 21.7°C
[11:06:15][D][sensor:094]: 'Temperature': Sending state 21.72214 °C with 1 decimals of accuracy
[11:06:21][D][sensor:094]: 'RSSI': Sending state -49.00000 dBm with 0 decimals of accuracy
[11:06:25][D][sensor:094]: 'ntc_source': Sending state 1.67850 V with 2 decimals of accuracy
[11:06:25][D][resistance:039]: 'resistance_sensor' - Resistance 11593.7Ω
[11:06:25][D][sensor:094]: 'resistance_sensor': Sending state 11593.71094 Ω with 1 decimals of accuracy
[11:06:25][D][ntc:026]: 'Temperature' - Temperature: 21.7°C
[11:06:25][D][sensor:094]: 'Temperature': Sending state 21.70879 °C with 1 decimals of accuracy
[11:06:35][D][sensor:094]: 'ntc_source': Sending state 1.67883 V with 2 decimals of accuracy
[11:06:35][D][resistance:039]: 'resistance_sensor' - Resistance 11598.4Ω
[11:06:35][D][sensor:094]: 'resistance_sensor': Sending state 11598.39746 Ω with 1 decimals of accuracy
[11:06:35][D][ntc:026]: 'Temperature' - Temperature: 21.7°C
[11:06:35][D][sensor:094]: 'Temperature': Sending state 21.69990 °C with 1 decimals of accuracy
[11:06:45][D][sensor:094]: 'ntc_source': Sending state 1.67917 V with 2 decimals of accuracy
[11:06:45][D][resistance:039]: 'resistance_sensor' - Resistance 11603.1Ω
[11:06:45][D][sensor:094]: 'resistance_sensor': Sending state 11603.08496 Ω with 1 decimals of accuracy
[11:06:45][D][ntc:026]: 'Temperature' - Temperature: 21.7°C
[11:06:45][D][sensor:094]: 'Temperature': Sending state 21.69101 °C with 1 decimals of accuracy
[11:06:55][D][sensor:094]: 'ntc_source': Sending state 1.67933 V with 2 decimals of accuracy
[11:06:55][D][resistance:039]: 'resistance_sensor' - Resistance 11605.4Ω
[11:06:55][D][sensor:094]: 'resistance_sensor': Sending state 11605.42969 Ω with 1 decimals of accuracy
[11:06:55][D][ntc:026]: 'Temperature' - Temperature: 21.7°C
[11:06:55][D][sensor:094]: 'Temperature': Sending state 21.68656 °C with 1 decimals of accuracy
[11:07:00][W][nextion:431]: Nextion reported variable name invalid!
[11:07:00][W][nextion:431]: Nextion reported variable name invalid!
[11:07:05][D][sensor:094]: 'ntc_source': Sending state 1.68067 V with 2 decimals of accuracy
[11:07:05][D][resistance:039]: 'resistance_sensor' - Resistance 11624.2Ω
[11:07:05][D][sensor:094]: 'resistance_sensor': Sending state 11624.20605 Ω with 1 decimals of accuracy
[11:07:05][D][ntc:026]: 'Temperature' - Temperature: 21.7°C
[11:07:05][D][sensor:094]: 'Temperature': Sending state 21.65099 °C with 1 decimals of accuracy
[11:07:11][D][text_sensor:064]: 'Device Name': Sending state 'nspaneldiele'
[11:07:15][D][sensor:094]: 'ntc_source': Sending state 1.68117 V with 2 decimals of accuracy
[11:07:15][D][resistance:039]: 'resistance_sensor' - Resistance 11631.3Ω
[11:07:15][D][sensor:094]: 'resistance_sensor': Sending state 11631.25684 Ω with 1 decimals of accuracy
[11:07:15][D][ntc:026]: 'Temperature' - Temperature: 21.6°C
[11:07:15][D][sensor:094]: 'Temperature': Sending state 21.63765 °C with 1 decimals of accuracy
[11:07:21][D][sensor:094]: 'RSSI': Sending state -49.00000 dBm with 0 decimals of accuracy

edwardtfn · 2024-11-19T12:00:38Z

When you open the automation using the Blueprint in Home Assistant, which version is shown there?
I should be v4.3.12. If you see something else, please re-import your blueprint, reload your automations (or reset Home Assistant) and please collect new logs from ESPHome if the problem persists.

shruxx · 2024-11-19T13:03:27Z

Thanks Edward for the quick fix. The panel is working again :)

Xitro01 · 2024-11-24T08:57:30Z

Same issue here, don't know how to solve. When pressing Update TFT, it writes and then it is stuck at 4% and just crashes.
Tried reimporting blueprint and reloading all automations, but no luck.
Is the nspanel_eu.tft v4.3.12 broken?

[09:56:02][W][nextion:091]: Nextion is not connected! 
[09:56:02][W][nextion:091]: Nextion is not connected! 
[09:56:03][W][nextion:091]: Nextion is not connected! 
[09:56:03][W][nextion:091]: Nextion is not connected! 
[09:56:04][W][nextion:091]: Nextion is not connected! 
[09:56:04][W][nextion:091]: Nextion is not connected! 
[09:56:05][W][nextion:091]: Nextion is not connected! 
[09:56:05][W][nextion:091]: Nextion is not connected! 
[09:56:06][W][nextion:091]: Nextion is not connected! 
[09:56:06][D][sensor:094]: 'ntc_source': Sending state 1.77283 V with 2 decimals of accuracy
[09:56:06][D][resistance:039]: 'resistance_sensor' - Resistance 13001.7Ω
[09:56:06][D][sensor:094]: 'resistance_sensor': Sending state 13001.67969 Ω with 1 decimals of accuracy
[09:56:06][D][ntc:026]: 'Temperature' - Temperature: 19.2°C
[09:56:06][D][sensor:094]: 'Temperature': Sending state 19.20744 °C with 1 decimals of accuracy
[09:56:06][W][nextion:091]: Nextion is not connected! 
[09:56:07][D][script.timer_sleep:3298]: Going to sleep from page 
[09:56:07][W][nextion:091]: Nextion is not connected! 
[09:56:07][W][nextion:091]: Nextion is not connected! 
[09:56:08][I][safe_mode:041]: Boot seems successful; resetting boot loop counter
[09:56:08][D][esp32.preferences:114]: Saving 1 preferences to flash...
[09:56:08][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
[09:56:08][D][script.boot_log:2048]: Restart Nextion
[09:56:08][D][switch:016]: 'Nextion display - Power' Turning OFF.
[09:56:08][D][switch:055]: 'Nextion display - Power': Sending state OFF
[09:56:08][W][nextion:091]: Nextion is not connected! 
[09:56:08][W][nextion:091]: Nextion is not connected! 
[09:56:09][W][nextion:091]: Nextion is not connected! 
[09:56:09][W][nextion:091]: Nextion is not connected! 
[09:56:10][D][switch:012]: 'Nextion display - Power' Turning ON.
[09:56:10][D][switch:055]: 'Nextion display - Power': Sending state ON
[09:56:10][W][nextion:091]: Nextion is not connected! 
[09:56:11][I][nextion:097]: Nextion is connected
[09:56:11][C][nextion:138]: Nextion:
[09:56:11][C][nextion:142]:   Device Model:     NX4832F035_011C
[09:56:11][C][nextion:143]:   Firmware Version: 110
[09:56:11][C][nextion:144]:   Serial Number:    BD8C34011A6AD56E
[09:56:11][C][nextion:145]:   Flash Size:       16777216
[09:56:11][C][nextion:147]:   Wake On Touch:    YES
[09:56:11][C][nextion:148]:   Exit reparse:     YES
[09:56:11][W][nextion:431]: Nextion reported variable name invalid!
[09:56:11][E][nextion:311]: Nextion queue is empty!
[09:56:11][W][nextion:431]: Nextion reported variable name invalid!
[09:56:11][E][nextion:311]: Nextion queue is empty!
[09:56:11][W][component:237]: Component display took a long time for an operation (155 ms).
[09:56:11][W][component:238]: Components should block for at most 30 ms.
[09:56:16][D][sensor:094]: 'ntc_source': Sending state 1.77417 V with 2 decimals of accuracy
[09:56:16][D][resistance:039]: 'resistance_sensor' - Resistance 13022.8Ω
[09:56:16][D][sensor:094]: 'resistance_sensor': Sending state 13022.82812 Ω with 1 decimals of accuracy
[09:56:16][D][ntc:026]: 'Temperature' - Temperature: 19.2°C
[09:56:16][D][sensor:094]: 'Temperature': Sending state 19.17227 °C with 1 decimals of accuracy
[09:56:17][D][script.timer_page:3261]: Fallback to page Home
[09:56:19][D][nextion:302]: Manually set nextion report ready
[09:56:19][D][nextion:380]: Nextion is setup
[09:56:19][D][script.boot_log:2048]: on_setup
[09:56:19][D][binary_sensor:036]: 'Nextion display': Sending state ON
[09:56:19][W][nextion:431]: Nextion reported variable name invalid!
[09:56:19][E][nextion:311]: Nextion queue is empty!
[09:56:26][D][sensor:094]: 'ntc_source': Sending state 1.77383 V with 2 decimals of accuracy
[09:56:26][D][resistance:039]: 'resistance_sensor' - Resistance 13017.5Ω
[09:56:26][D][sensor:094]: 'resistance_sensor': Sending state 13017.53809 Ω with 1 decimals of accuracy
[09:56:26][D][ntc:026]: 'Temperature' - Temperature: 19.2°C
[09:56:26][D][sensor:094]: 'Temperature': Sending state 19.18106 °C with 1 decimals of accuracy
[09:56:30][W][nextion:431]: Nextion reported variable name invalid!
[09:56:30][W][nextion:431]: Nextion reported variable name invalid!
[09:56:30][W][nextion:431]: Nextion reported variable name invalid!
[09:56:32][D][sensor:094]: 'Display Current brightness': Sending state 25.00000 % with 0 decimals of accuracy
[09:56:36][D][sensor:094]: 'ntc_source': Sending state 1.77383 V with 2 decimals of accuracy
[09:56:36][D][resistance:039]: 'resistance_sensor' - Resistance 13017.5Ω
[09:56:36][D][sensor:094]: 'resistance_sensor': Sending state 13017.54004 Ω with 1 decimals of accuracy
[09:56:36][D][ntc:026]: 'Temperature' - Temperature: 19.2°C
[09:56:36][D][sensor:094]: 'Temperature': Sending state 19.18106 °C with 1 decimals of accuracy
[09:56:41][D][text_sensor:064]: 'Device Name': Sending state 'nspanel_pckamer'
[09:56:46][D][sensor:094]: 'ntc_source': Sending state 1.77400 V with 2 decimals of accuracy
[09:56:46][D][resistance:039]: 'resistance_sensor' - Resistance 13020.2Ω
[09:56:46][D][sensor:094]: 'resistance_sensor': Sending state 13020.18457 Ω with 1 decimals of accuracy
[09:56:46][D][ntc:026]: 'Temperature' - Temperature: 19.2°C
[09:56:46][D][sensor:094]: 'Temperature': Sending state 19.17666 °C with 1 decimals of accuracy
[09:56:52][D][sensor:094]: 'RSSI': Sending state -59.00000 dBm with 0 decimals of accuracy
[09:56:56][D][sensor:094]: 'ntc_source': Sending state 1.77350 V with 2 decimals of accuracy
[09:56:56][D][resistance:039]: 'resistance_sensor' - Resistance 13012.3Ω
[09:56:56][D][sensor:094]: 'resistance_sensor': Sending state 13012.25195 Ω with 1 decimals of accuracy
[09:56:56][D][ntc:026]: 'Temperature' - Temperature: 19.2°C
[09:56:56][D][sensor:094]: 'Temperature': Sending state 19.18985 °C with 1 decimals of accuracy
[09:57:00][W][nextion:431]: Nextion reported variable name invalid!
[09:57:00][W][nextion:431]: Nextion reported variable name invalid!
[09:57:00][W][nextion:431]: Nextion reported variable name invalid!
[09:57:00][W][nextion:431]: Nextion reported variable name invalid!
[09:57:00][W][nextion:431]: Nextion reported variable name invalid!
[09:57:00][W][nextion:431]: Nextion reported variable name invalid!
[09:57:00][W][nextion:431]: Nextion reported variable name invalid!
[09:57:02][D][script.check_versions:2131]: Versions:
[09:57:02][D][script.check_versions:2132]:   TFT:       
[09:57:02][D][script.check_versions:2133]:   ESPHome:   4.3.12
[09:57:02][E][script.check_versions:2135]: TFT version mismatch!

edwardtfn · 2024-11-24T09:09:31Z

Could you please share ESPHome logs from right before you press the update button until a few seconds after the device restarts?

Xitro01 · 2024-11-24T09:11:40Z

Could you please share ESPHome logs from right before you press the update button until a few seconds after the device restarts?

Will do, give me a couple of minutes. Currently trying Blank to see if that solves stuff.

Xitro01 · 2024-11-24T09:17:03Z

[10:15:06][D][button:010]: 'Update TFT display' Pressed.
[10:15:06][W][nextion:431]: Nextion reported variable name invalid!
[10:15:08][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[10:15:08][W][nextion:392]: Nextion reported page ID invalid!
[10:15:10][W][nextion:431]: Nextion reported variable name invalid!
[10:15:11][D][script.timer_sleep:3298]: Going to sleep from page 
[10:15:11][W][nextion:392]: Nextion reported page ID invalid!
[10:15:11][D][sensor:094]: 'Display Current brightness': Sending state 0.00000 % with 0 decimals of accuracy
[10:15:12][D][addon_upload_tft.script.report_upload_progress:158]: Set Nextion unavailable for blueprint calls
[10:15:12][D][binary_sensor:036]: 'Nextion display': Sending state OFF
[10:15:12][D][addon_upload_tft.script.report_upload_progress:158]: Preparing for upload...
[10:15:12][D][script.nextion_status:107]: Nextion status:
[10:15:12][D][script.nextion_status:108]:   Is detected: YES
[10:15:12][D][script.nextion_status:109]:   Is setup:    YES
[10:15:12][D][script.nextion_status:110]:   Queue size:  0
[10:15:12][D][addon_upload_tft.script.upload_tft:220]: Starting the upload script
[10:15:12][D][addon_upload_tft.script.upload_tft:221]:   Valid TFT:               NO
[10:15:12][D][addon_upload_tft.script.upload_tft:222]:   Current baud rate:       115200 bps
[10:15:12][D][addon_upload_tft.script.upload_tft:223]:   Target upload baud rate: 921600 bps
[10:15:12][D][addon_upload_tft.script.upload_tft:224]:   Upload URL: https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/v4.3.12/hmi/nspanel_eu.tft
[10:15:14][D][addon_upload_tft.script.open_upload_dialog:134]: Showing upload dialog page
[10:15:14][W][nextion:392]: Nextion reported page ID invalid!
[10:15:16][D][sensor:094]: 'ntc_source': Sending state 1.77150 V with 2 decimals of accuracy
[10:15:16][D][resistance:039]: 'resistance_sensor' - Resistance 12980.6Ω
[10:15:16][D][sensor:094]: 'resistance_sensor': Sending state 12980.56934 Ω with 1 decimals of accuracy
[10:15:16][D][ntc:026]: 'Temperature' - Temperature: 19.2°C
[10:15:16][D][sensor:094]: 'Temperature': Sending state 19.24261 °C with 1 decimals of accuracy
[10:15:16][W][nextion:431]: Nextion reported variable name invalid!
[10:15:18][D][addon_upload_tft.script.report_upload_progress:158]: Stopping other scripts
[10:15:18][D][script.nextion_status:107]: Nextion status:
[10:15:18][D][script.nextion_status:108]:   Is detected: YES
[10:15:18][D][script.nextion_status:109]:   Is setup:    YES
[10:15:18][D][script.nextion_status:110]:   Queue size:  0
[10:15:18][D][addon_upload_tft.script.report_upload_progress:158]: Setting baud rate
[10:15:18][D][script.set_baud_rate:3022]: Baud rate changing from 115200 to 921600 bps
[10:15:18][D][script.set_baud_rate:3023]: Flush UART
[10:15:18][D][script.set_baud_rate:3029]: Sending instruction 'baud=921600' to Nextion
[10:15:18][D][script.set_baud_rate:3031]: Flush UART
[10:15:18][D][script.set_baud_rate:3037]: Set ESPHome new baud rate to 921600 bps
[10:15:18][C][uart.idf:153]: UART 0 was reloaded.
[10:15:18][C][uart.idf:159]: UART Bus 0:
[10:15:18][C][uart.idf:160]:   TX Pin: GPIO16
[10:15:18][C][uart.idf:161]:   RX Pin: GPIO17
[10:15:18][C][uart.idf:163]:   RX Buffer Size: 256
[10:15:20][D][main:403]: Attempting to upload TFT
[10:15:20][D][addon_upload_tft.script.report_upload_progress:158]: Attempt #1 at 921600 bps
[10:15:20][D][addon_upload_tft.script.nextion_upload:118]: Waiting for empty UART and Nextion queues
[10:15:22][D][addon_upload_tft.script.nextion_upload:126]: Starting TFT upload...
[10:15:22][D][nextion.upload.idf:157]: Nextion TFT upload requested
[10:15:22][D][nextion.upload.idf:158]: Exit reparse: NO
[10:15:22][D][nextion.upload.idf:159]: URL: https://raw.githubusercontent.com/Blackymas/NSPanel_HA_Blueprint/v4.3.12/hmi/nspanel_eu.tft
[10:15:22][D][nextion.upload.idf:188]: Baud rate: 921600
WARNING nspanel-pckamer @ 192.168.1.120: Connection error occurred: [Errno 104] Connection reset by peer
INFO Processing unexpected disconnect from ESPHome API for nspanel-pckamer @ 192.168.1.120
WARNING Disconnected from API
INFO Successfully connected to nspanel-pckamer @ 192.168.1.120 in 0.011s
INFO Successful handshake with nspanel-pckamer @ 192.168.1.120 in 0.020s
[10:15:48][D][sensor:094]: 'ntc_source': Sending state 1.76867 V with 2 decimals of accuracy
[10:15:48][D][resistance:039]: 'resistance_sensor' - Resistance 12935.8Ω
[10:15:48][D][sensor:094]: 'resistance_sensor': Sending state 12935.82910 Ω with 1 decimals of accuracy
[10:15:48][D][ntc:026]: 'Temperature' - Temperature: 19.3°C
[10:15:48][D][sensor:094]: 'Temperature': Sending state 19.31735 °C with 1 decimals of accuracy
[10:15:48][W][nextion:091]: Nextion is not connected! 
[10:15:48][W][nextion:091]: Nextion is not connected! 
[10:15:49][W][nextion:091]: Nextion is not connected! 
[10:15:49][W][nextion:091]: Nextion is not connected! 
[10:15:50][W][nextion:091]: Nextion is not connected! 
[10:15:50][W][nextion:091]: Nextion is not connected! 
[10:15:51][W][nextion:091]: Nextion is not connected! 
[10:15:51][W][nextion:091]: Nextion is not connected! 
[10:15:52][W][nextion:091]: Nextion is not connected! 
[10:15:52][W][nextion:091]: Nextion is not connected! 
[10:15:53][W][nextion:091]: Nextion is not connected! 
[10:15:53][W][nextion:091]: Nextion is not connected! 
[10:15:53][D][api:103]: Accepted 192.168.1.6
[10:15:54][W][nextion:091]: Nextion is not connected! 
[10:15:54][D][api.connection:1446]: Home Assistant 2024.11.3 (192.168.1.6): Connected successfully
[10:15:54][D][script:077]: Script 'dump_config' restarting (mode: restart)
[10:15:54][D][time:051]: Synchronized time: 2024-11-24 10:15:54
[10:15:54][D][time.on_time_sync:211]: System clock synchronized
[10:15:54][D][time.on_time_sync:212]: Timezone: CET-1CEST,M3.5.0,M10.5.0/3
[10:15:54][W][nextion:091]: Nextion is not connected! 
[10:15:55][W][nextion:091]: Nextion is not connected! 
[10:15:55][W][nextion:091]: Nextion is not connected! 
[10:15:56][W][nextion:091]: Nextion is not connected! 
[10:15:56][W][nextion:091]: Nextion is not connected! 
[10:15:57][W][nextion:091]: Nextion is not connected! 
[10:15:57][W][nextion:091]: Nextion is not connected! 
[10:15:58][D][sensor:094]: 'ntc_source': Sending state 1.76950 V with 2 decimals of accuracy
[10:15:58][D][resistance:039]: 'resistance_sensor' - Resistance 12949.0Ω
[10:15:58][D][sensor:094]: 'resistance_sensor': Sending state 12948.96973 Ω with 1 decimals of accuracy
[10:15:58][D][ntc:026]: 'Temperature' - Temperature: 19.3°C
[10:15:58][D][sensor:094]: 'Temperature': Sending state 19.29537 °C with 1 decimals of accuracy
[10:15:58][W][nextion:091]: Nextion is not connected! 
[10:15:58][W][nextion:091]: Nextion is not connected! 
[10:15:59][W][nextion:091]: Nextion is not connected! 
[10:15:59][W][nextion:091]: Nextion is not connected! 
[10:16:00][W][nextion:091]: Nextion is not connected! 
[10:16:00][W][nextion:091]: Nextion is not connected! 
[10:16:01][W][nextion:091]: Nextion is not connected! 
[10:16:02][W][nextion:091]: Nextion is not connected! 
[10:16:02][W][nextion:091]: Nextion is not connected! 
[10:16:03][W][nextion:091]: Nextion is not connected! 
[10:16:03][W][nextion:091]: Nextion is not connected! 
[10:16:04][W][nextion:091]: Nextion is not connected! 
[10:16:04][C][nspanel_ha_blueprint:2224]: Wi-Fi:         Fair (-60 dBm)
[10:16:04][C][nspanel_ha_blueprint:2235]: API:           Connected
[10:16:04][C][nspanel_ha_blueprint:2243]: Blueprint:
[10:16:04][W][nspanel_ha_blueprint:2248]:   Init steps:  0 (0.0%)
[10:16:04][W][nspanel_ha_blueprint:2249]:   State:       Pending
[10:16:04][C][nspanel_ha_blueprint:2250]: Requesting blueprint settings
[10:16:04][C][nspanel_ha_blueprint:2255]: ESPHome:
[10:16:04][C][nspanel_ha_blueprint:2256]:   Version:     4.3.12
[10:16:04][C][nspanel_ha_blueprint:2257]:   Compiler:    2024.11.1
[10:16:04][C][nspanel_ha_blueprint:2262]:   Framework:   ESP-IDF
[10:16:04][C][nspanel_ha_blueprint:2267]:   Free heap:
[10:16:04][C][nspanel_ha_blueprint:2271]:     Internal:   203136 bytes (57.8%)
[10:16:04][C][nspanel_ha_blueprint:2281]:     PSRAM:     2001127 bytes (96.0%)
[10:16:04][C][nspanel_ha_blueprint:2288]: UART:
[10:16:04][C][nspanel_ha_blueprint:2289]:   Baud rate:   115200 bps
[10:16:04][C][nspanel_ha_blueprint:2290]:   Queue size:  0
[10:16:04][W][nextion:091]: Nextion is not connected! 
[10:16:05][W][nextion:091]: Nextion is not connected! 
[10:16:05][W][nextion:091]: Nextion is not connected! 
[10:16:06][W][nextion:091]: Nextion is not connected! 
[10:16:06][W][nextion:091]: Nextion is not connected! 
[10:16:07][W][nextion:091]: Nextion is not connected! 
[10:16:07][D][text_sensor:064]: 'Device Name': Sending state 'nspanel_pckamer'
[10:16:07][W][nextion:091]: Nextion is not connected! 
[10:16:08][D][sensor:094]: 'ntc_source': Sending state 1.76860 V with 2 decimals of accuracy
[10:16:08][D][resistance:039]: 'resistance_sensor' - Resistance 12934.8Ω
[10:16:08][D][sensor:094]: 'resistance_sensor': Sending state 12934.77637 Ω with 1 decimals of accuracy
[10:16:08][D][ntc:026]: 'Temperature' - Temperature: 19.3°C
[10:16:08][D][sensor:094]: 'Temperature': Sending state 19.31911 °C with 1 decimals of accuracy
[10:16:08][W][nextion:091]: Nextion is not connected! 
[10:16:08][W][nextion:091]: Nextion is not connected! 
[10:16:09][W][nextion:091]: Nextion is not connected! 
[10:16:09][W][nextion:091]: Nextion is not connected! 
[10:16:10][D][sensor:094]: 'RSSI': Sending state -59.00000 dBm with 0 decimals of accuracy
[10:16:10][W][nextion:091]: Nextion is not connected! 
[10:16:10][W][nextion:091]: Nextion is not connected! 
[10:16:11][W][nextion:091]: Nextion is not connected! 
[10:16:11][W][nextion:091]: Nextion is not connected! 
[10:16:12][W][nextion:091]: Nextion is not connected! 
[10:16:12][W][nextion:091]: Nextion is not connected! 
[10:16:13][W][nextion:091]: Nextion is not connected! 
[10:16:13][W][nextion:091]: Nextion is not connected! 
[10:16:14][W][nextion:091]: Nextion is not connected! 
[10:16:14][W][nextion:091]: Nextion is not connected! 
[10:16:15][W][nextion:091]: Nextion is not connected! 
[10:16:15][W][nextion:091]: Nextion is not connected! 
[10:16:16][W][nextion:091]: Nextion is not connected! 
[10:16:16][W][nextion:091]: Nextion is not connected! 
[10:16:17][W][nextion:091]: Nextion is not connected! 
[10:16:17][W][nextion:091]: Nextion is not connected! 
[10:16:18][D][sensor:094]: 'ntc_source': Sending state 1.76950 V with 2 decimals of accuracy
[10:16:18][D][resistance:039]: 'resistance_sensor' - Resistance 12949.0Ω
[10:16:18][D][sensor:094]: 'resistance_sensor': Sending state 12948.96973 Ω with 1 decimals of accuracy
[10:16:18][D][ntc:026]: 'Temperature' - Temperature: 19.3°C
[10:16:18][D][sensor:094]: 'Temperature': Sending state 19.29537 °C with 1 decimals of accuracy
[10:16:18][W][nextion:091]: Nextion is not connected! 
[10:16:18][W][nextion:091]: Nextion is not connected! 
[10:16:19][W][nextion:091]: Nextion is not connected! 
[10:16:19][W][nextion:091]: Nextion is not connected! 
[10:16:20][W][nextion:091]: Nextion is not connected! 
[10:16:21][W][nextion:091]: Nextion is not connected! 
[10:16:21][W][nextion:091]: Nextion is not connected! 
[10:16:22][W][nextion:091]: Nextion is not connected! 
[10:16:22][W][nextion:091]: Nextion is not connected! 
[10:16:23][W][nextion:091]: Nextion is not connected! 
[10:16:23][W][nextion:091]: Nextion is not connected! 
[10:16:24][W][nextion:091]: Nextion is not connected! 
[10:16:24][W][nextion:091]: Nextion is not connected! 
[10:16:25][W][nextion:091]: Nextion is not connected! 
[10:16:25][W][nextion:091]: Nextion is not connected! 
[10:16:26][W][nextion:091]: Nextion is not connected! 
[10:16:26][W][nextion:091]: Nextion is not connected! 
[10:16:27][W][nextion:091]: Nextion is not connected! 
[10:16:27][W][nextion:091]: Nextion is not connected! 
[10:16:28][D][sensor:094]: 'ntc_source': Sending state 1.77033 V with 2 decimals of accuracy
[10:16:28][D][resistance:039]: 'resistance_sensor' - Resistance 12962.1Ω
[10:16:28][D][sensor:094]: 'resistance_sensor': Sending state 12962.12695 Ω with 1 decimals of accuracy
[10:16:28][D][ntc:026]: 'Temperature' - Temperature: 19.3°C
[10:16:28][D][sensor:094]: 'Temperature': Sending state 19.27338 °C with 1 decimals of accuracy
[10:16:28][W][nextion:091]: Nextion is not connected! 
[10:16:28][W][nextion:091]: Nextion is not connected! 
[10:16:29][I][safe_mode:041]: Boot seems successful; resetting boot loop counter
[10:16:29][D][esp32.preferences:114]: Saving 1 preferences to flash...
[10:16:29][D][esp32.preferences:143]: Saving 1 preferences to flash: 0 cached, 1 written, 0 failed
[10:16:29][W][nextion:091]: Nextion is not connected! 
[10:16:29][D][script.boot_log:2048]: Restart Nextion
[10:16:29][D][switch:016]: 'Nextion display - Power' Turning OFF.
[10:16:29][D][switch:055]: 'Nextion display - Power': Sending state OFF
[10:16:29][W][nextion:091]: Nextion is not connected! 
[10:16:29][I][script.set_timezone:3151]: Setting timezone: 
[10:16:29][C][homeassistant.time:010]: Home Assistant Time:
[10:16:29][C][homeassistant.time:011]:   Timezone: 'CET-1CEST,M3.5.0,M10.5.0/3'
[10:16:29][D][script.boot_log:2048]: init_page_home
[10:16:29][D][sensor:094]: 'Blueprint': Sending state 3.22581 % with 1 decimals of accuracy
[10:16:29][D][sensor:094]: 'Blueprint': Sending state 9.67742 % with 1 decimals of accuracy
[10:16:29][D][script.boot_log:2048]: init_page_settings
[10:16:29][D][sensor:094]: 'Blueprint': Sending state 22.58064 % with 1 decimals of accuracy
[10:16:29][D][script.boot_log:2048]: init_hardware
[10:16:29][D][sensor:094]: 'Blueprint': Sending state 48.38710 % with 1 decimals of accuracy
[10:16:29][D][script.boot_log:2048]: init_global
[10:16:30][D][script.boot_log:2048]: Global settings
[10:16:30][D][text_sensor:064]: 'Version Blueprint': Sending state '4.3.12'
[10:16:30][D][script:077]: Script 'check_versions' restarting (mode: restart)
[10:16:30][D][script.page_changed:2644]: New page: 
[10:16:30][D][text_sensor:064]: 'Detailed Entity': Sending state ''
[10:16:30][D][sensor:094]: 'Blueprint': Sending state 100.00000 % with 1 decimals of accuracy
[10:16:30][W][nextion:091]: Nextion is not connected! 
[10:16:30][W][nextion:091]: Nextion is not connected! 
[10:16:31][D][switch:012]: 'Nextion display - Power' Turning ON.
[10:16:31][D][switch:055]: 'Nextion display - Power': Sending state ON
[10:16:31][W][nextion:091]: Nextion is not connected! 
[10:16:31][W][nextion:091]: Nextion is not connected! 
[10:16:32][D][nextion:080]: 0x1A error ignored during setup
[10:16:32][D][nextion:080]: 0x1A error ignored during setup
[10:16:32][I][nextion:097]: Nextion is connected
[10:16:32][C][nextion:138]: Nextion:
[10:16:32][C][nextion:142]:   Device Model:     NX4832F035_011C
[10:16:32][C][nextion:143]:   Firmware Version: 110
[10:16:32][C][nextion:144]:   Serial Number:    BD8C34011A6AD56E
[10:16:32][C][nextion:145]:   Flash Size:       16777216
[10:16:32][C][nextion:147]:   Wake On Touch:    YES
[10:16:32][C][nextion:148]:   Exit reparse:     YES
[10:16:32][W][component:237]: Component display took a long time for an operation (148 ms).
[10:16:32][W][component:238]: Components should block for at most 30 ms.
[10:16:35][D][script.timer_sleep:3298]: Going to sleep from page 
[10:16:38][D][sensor:094]: 'ntc_source': Sending state 1.77133 V with 2 decimals of accuracy
[10:16:38][D][resistance:039]: 'resistance_sensor' - Resistance 12977.9Ω
[10:16:38][D][sensor:094]: 'resistance_sensor': Sending state 12977.93359 Ω with 1 decimals of accuracy
[10:16:38][D][ntc:026]: 'Temperature' - Temperature: 19.2°C
[10:16:38][D][sensor:094]: 'Temperature': Sending state 19.24700 °C with 1 decimals of accuracy
[10:16:40][D][nextion:302]: Manually set nextion report ready
[10:16:40][D][nextion:380]: Nextion is setup
[10:16:40][D][script.boot_log:2048]: on_setup
[10:16:40][D][binary_sensor:036]: 'Nextion display': Sending state ON
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][I][script.set_timezone:3151]: Setting timezone: 
[10:16:40][C][homeassistant.time:010]: Home Assistant Time:
[10:16:40][C][homeassistant.time:011]:   Timezone: 'CET-1CEST,M3.5.0,M10.5.0/3'
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][E][nextion:311]: Nextion queue is empty!
[10:16:40][D][script.boot_log:2048]: init_page_home
[10:16:40][D][sensor:094]: 'Blueprint': Sending state 100.00000 % with 1 decimals of accuracy
[10:16:40][W][component:237]: Component api took a long time for an operation (69 ms).
[10:16:40][W][component:238]: Components should block for at most 30 ms.
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][D][sensor:094]: 'Blueprint': Sending state 100.00000 % with 1 decimals of accuracy
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][D][script.boot_log:2048]: init_page_settings
[10:16:40][D][sensor:094]: 'Blueprint': Sending state 100.00000 % with 1 decimals of accuracy
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][D][script.boot_log:2048]: init_hardware
[10:16:40][D][sensor:094]: 'Blueprint': Sending state 100.00000 % with 1 decimals of accuracy
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][D][script.boot_log:2048]: init_global
[10:16:40][D][script.boot_log:2048]: Global settings
[10:16:40][D][text_sensor:064]: 'Version Blueprint': Sending state '4.3.12'
[10:16:40][D][script:077]: Script 'check_versions' restarting (mode: restart)
[10:16:40][D][script:077]: Script 'check_versions' restarting (mode: restart)
[10:16:40][D][script.page_changed:2644]: New page: 
[10:16:40][D][text_sensor:064]: 'Detailed Entity': Sending state ''
[10:16:40][D][script:077]: Script 'timer_page' restarting (mode: restart)
[10:16:40][D][script:077]: Script 'timer_dim' restarting (mode: restart)
[10:16:40][D][sensor:094]: 'Blueprint': Sending state 100.00000 % with 1 decimals of accuracy
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:392]: Nextion reported page ID invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:40][W][nextion:431]: Nextion reported variable name invalid!
[10:16:41][W][nextion:431]: Nextion reported variable name invalid!
[10:16:41][W][nextion:431]: Nextion reported variable name invalid!
[10:16:41][W][nextion:431]: Nextion reported variable name invalid!
[10:16:41][W][nextion:431]: Nextion reported variable name invalid!
[10:16:41][W][nextion:431]: Nextion reported variable name invalid!
[10:16:41][W][nextion:431]: Nextion reported variable name invalid!
[10:16:41][W][nextion:431]: Nextion reported variable name invalid!
[10:16:45][D][script.timer_sleep:3298]: Going to sleep from page 
[10:16:45][W][nextion:392]: Nextion reported page ID invalid!
[10:16:45][D][sensor:094]: 'Display Current brightness': Sending state 0.00000 % with 0 decimals of accuracy
[10:16:48][D][sensor:094]: 'ntc_source': Sending state 1.77017 V with 2 decimals of accuracy
[10:16:48][D][resistance:039]: 'resistance_sensor' - Resistance 12959.5Ω
[10:16:48][D][sensor:094]: 'resistance_sensor': Sending state 12959.49707 Ω with 1 decimals of accuracy
[10:16:48][D][ntc:026]: 'Temperature' - Temperature: 19.3°C
[10:16:48][D][sensor:094]: 'Temperature': Sending state 19.27777 °C with 1 decimals of accuracy

Xitro01 · 2024-11-24T09:25:00Z

Coming much further now, after just retrying a couple of times.
Maybe it is just my WiFi (or the device) acting up.. Came to 24%, now only to 2%.

EDIT: Restarted one of my access points and forced it to the other and now it completed without any issues. So probably it was related to my WiFi being unstable.

edwardtfn · 2024-11-24T10:28:11Z

Nice to hear it worked. :)

slangpetter added the Bug Identifies an issue where the system is not functioning as expected. label Nov 8, 2024

edwardtfn added the Upload TFT Pertains to problems encountered during TFT file uploads. label Nov 8, 2024

TFT stuck, can´t update #2372

TFT stuck, can´t update #2372

Comments

slangpetter commented Nov 8, 2024

TFT Version

Firmware Version

Blueprint Version

Panel Model

What is the bug?

Steps to Reproduce

Your Panel's YAML

ESPHome Logs

Home Assistant Logs

edwardtfn commented Nov 8, 2024

slangpetter commented Nov 8, 2024

edwardtfn commented Nov 8, 2024

slangpetter commented Nov 8, 2024

slangpetter commented Nov 8, 2024

edwardtfn commented Nov 8, 2024

slangpetter commented Nov 8, 2024 • edited Loading

edwardtfn commented Nov 8, 2024

edwardtfn commented Nov 8, 2024

slangpetter commented Nov 8, 2024

edwardtfn commented Nov 8, 2024

slangpetter commented Nov 8, 2024

slangpetter commented Nov 8, 2024

slangpetter commented Nov 8, 2024

edwardtfn commented Nov 8, 2024

Mauricewillemstein commented Nov 9, 2024

slangpetter commented Nov 11, 2024

slangpetter commented Nov 11, 2024

Settings - Editable values

Add-on configuration (if needed)

heater_relay: "1" # Possible values: "1" or "2"

Customization area

My customization - Start

My customization - End

Core and optional configurations

slangpetter commented Nov 11, 2024

edwardtfn commented Nov 11, 2024 • edited Loading

edwardtfn commented Nov 11, 2024

slangpetter commented Nov 11, 2024

slangpetter commented Nov 11, 2024

edwardtfn commented Nov 11, 2024

edwardtfn commented Nov 11, 2024

slangpetter commented Nov 11, 2024

slangpetter commented Nov 11, 2024

slangpetter commented Nov 11, 2024

slangpetter commented Nov 11, 2024

slangpetter commented Nov 11, 2024

slangpetter commented Nov 11, 2024

edwardtfn commented Nov 11, 2024

slangpetter commented Nov 11, 2024 • edited Loading

edwardtfn commented Nov 11, 2024

edwardtfn commented Nov 11, 2024

slangpetter commented Nov 11, 2024

slangpetter commented Nov 11, 2024

slangpetter commented Nov 11, 2024

edwardtfn commented Nov 11, 2024

edwardtfn commented Nov 11, 2024

edwardtfn commented Nov 11, 2024

slangpetter commented Nov 11, 2024

slangpetter commented Nov 11, 2024

slangpetter commented Nov 11, 2024 • edited Loading

slangpetter commented Nov 11, 2024

edwardtfn commented Nov 11, 2024

shruxx commented Nov 19, 2024 • edited by edwardtfn Loading

edwardtfn commented Nov 19, 2024

shruxx commented Nov 19, 2024

Xitro01 commented Nov 24, 2024 • edited Loading

edwardtfn commented Nov 24, 2024

Xitro01 commented Nov 24, 2024

Xitro01 commented Nov 24, 2024

Xitro01 commented Nov 24, 2024 • edited Loading

edwardtfn commented Nov 24, 2024

slangpetter commented Nov 8, 2024 •

edited

Loading

edwardtfn commented Nov 11, 2024 •

edited

Loading

slangpetter commented Nov 11, 2024 •

edited

Loading

slangpetter commented Nov 11, 2024 •

edited

Loading

shruxx commented Nov 19, 2024 •

edited by edwardtfn

Loading

Xitro01 commented Nov 24, 2024 •

edited

Loading

Xitro01 commented Nov 24, 2024 •

edited

Loading