diff --git a/User_Setups/Setup73_ESP32_S3_ILI9488.h b/User_Setups/Setup73_ESP32_S3_ILI9488.h
new file mode 100644
index 00000000..4d67b927
--- /dev/null
+++ b/User_Setups/Setup73_ESP32_S3_ILI9488.h
@@ -0,0 +1,33 @@
+// See SetupX_Template.h for all options available
+#define USER_SETUP_ID 21
+
+#define ILI9488_DRIVER
+
+#define TFT_MISO 19 // (leave TFT SDO disconnected if other SPI devices share MISO)
+#define TFT_MOSI 10 // GREEN
+#define TFT_SCLK 11 // YELLOW
+#define TFT_CS    12  // Chip select control pin PURPLE
+#define TFT_DC    13  // Data Command control pin BLUE 
+#define TFT_RST   9  // Reset pin (could connect to RST pin) GREY
+
+
+#define LOAD_GLCD   // Font 1. Original Adafruit 8 pixel font needs ~1820 bytes in FLASH
+#define LOAD_FONT2  // Font 2. Small 16 pixel high font, needs ~3534 bytes in FLASH, 96 characters
+#define LOAD_FONT4  // Font 4. Medium 26 pixel high font, needs ~5848 bytes in FLASH, 96 characters
+#define LOAD_FONT6  // Font 6. Large 48 pixel font, needs ~2666 bytes in FLASH, only characters 1234567890:-.apm
+#define LOAD_FONT7  // Font 7. 7 segment 48 pixel font, needs ~2438 bytes in FLASH, only characters 1234567890:.
+#define LOAD_FONT8  // Font 8. Large 75 pixel font needs ~3256 bytes in FLASH, only characters 1234567890:-.
+#define LOAD_GFXFF  // FreeFonts. Include access to the 48 Adafruit_GFX free fonts FF1 to FF48 and custom fonts
+
+#define SMOOTH_FONT
+
+
+// #define SPI_FREQUENCY  20000000
+//#define SPI_FREQUENCY  27000000
+ #define SPI_FREQUENCY  40000000
+// #define SPI_FREQUENCY  80000000
+
+// Optional reduced SPI frequency for reading TFT
+#define SPI_READ_FREQUENCY  16000000
+
+#define SPI_TOUCH_FREQUENCY  2500000