-
设置160MHz后,路由器重启后WiFi会掉 |
Beta Was this translation helpful? Give feedback.
Replies: 9 comments 10 replies
-
?你自己改了什么我也不知道 |
Beta Was this translation helpful? Give feedback.
-
系统日志
|
Beta Was this translation helpful? Give feedback.
-
内核日志
|
Beta Was this translation helpful? Give feedback.
This comment was marked as off-topic.
This comment was marked as off-topic.
-
不好意思刚才那个我看错了,那个我之前想着就80Mhz将就用了所以又调回去了,所以重启正常的是40信道80Mhz状态的,后来我连上160Mhz设备却还是80Mhz才发现是忘记调回160Mhz,所以我又调回160Mhz重启了测试,启动完成后果然还是不行,还是disabled state 我把系统日志里关于wlan1和radio1的日志截取下来了:
是不是因为
导致的,但我不知道这个原因是什么,但它说wlan1这个接口名称已使用 |
Beta Was this translation helpful? Give feedback.
-
然后这个是手动重新选一个信道(我这里选的是60信道@5.3Ghz)保存并应用后,wlan1正常启动的系统日志:
|
Beta Was this translation helpful? Give feedback.
-
|
Beta Was this translation helpful? Give feedback.
-
绝了,我找到原因了,居然是和访客网络那个luci-app冲突了,把它创建的访客网络删除后,再重启就完全正常了 |
Beta Was this translation helpful? Give feedback.
绝了,我找到原因了,居然是和访客网络那个luci-app冲突了,把它创建的访客网络删除后,再重启就完全正常了