Welcome to TonexOneController Discussions!

[Builty]

👋 Welcome!

We’re using Discussions as a place to connect with other members of our community. We hope that you:

• Ask questions you’re wondering about.
• Share ideas.
• Engage with other community members.
• Welcome others and are open-minded. Remember that this is a community we
  build together 💪.

To get started, comment below with an introduction of yourself and tell us about what you do with this community.

[waltiti17]

Hey Greg Already left some comments on your YouTube videos and facebook post.
First thanks a lot, a lot.

Second, some suggestions.

1. Is possible to handle 2 tonex one units, not at the same time, maybe with a physical switch or software switch in the TonexOneController software?

2. is possible to use on the big Tonex Pedal, I think is a complete diferent unit, but maybe.

Thanks a lot again

[dxmadrid]

Hello .

A video tutorial of the start-up would be nice, for those of us who are not familiar with Arduino.
Thank you

[Builty]

Hi. Do you mean the process of putting the code onto the board, or the whole code development part?
First one I plan to do soon and is not difficult. The second one is far more complicated.

[dxmadrid]

Todo ok mi esp32s3zero funcionando sin problema.

[Builty]

Great

[denysetiaji]

hello greg, i dont undeestand. for tonex no display. i just create that board and 5v adapter or need doing some stuff like coding?

[Builty]

Hi. There are two steps needed.

1. Do the wiring, as per https://github.com/Builty/TonexOneController/blob/main/HardwarePlatforms.md#waveshare_zero
2. Upload the firmware, as per https://github.com/Builty/TonexOneController/blob/main/FirmwareUploading.md

You don't need to write any code or anything special like that. But you do need to put my code onto the PCB, which is what step 2 does.

This might help also:
https://www.youtube.com/watch?v=qkOs5gk3bcQ

[denysetiaji]

thank you for the respon, but is there any chance for using this to boss gx 10?

[Builty]

Hi. Sorry I don't know anything about the Boss gx10.
I can see it already has footswitches, and can use bluetooth also. I don't know what you would gain from adding this controller.

[denysetiaji]

its need usb midi like host midi i think, because i need to using pc or phone and app for using usb midi to wireless midi controller. bluetooth needs separate item to buy boss bt-dual.i just need mvave chcocolate for PC command to change preset

[Builty]

It's probably possible to change the code to do this. Replacing the Tonex host code with USB Midi code