PCB Support

Changelog:

• Add PCB support(Only Arduino Nano ESP32)
• Change Display resolution to 240x240

Flash using:
python3 esptool.py --chip esp32s3 --port UPLOAD_PORT --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size FLASH_SIZE(16MB or 8MB) 0x0000 bootloader.bin 0x8000 partitions.bin 0xe000 boot_app0.bin 0x10000 firmware.bin

If you don't know size of board, use detect as flash_size and use the 8MB image. For Arduino Nano ESP32 use detect and the only image available here

New version is out!

Changelog:

• Added support for Arduino Nano ESP32
• Added ARP Poisoner
• Fixed crash when scanned Wi-Fi networks is empty

Flash using:
python3 esptool.py --chip esp32s3 --port UPLOAD_PORT --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size FLASH_SIZE(16MB or 8MB) 0x0000 bootloader.bin 0x8000 partitions.bin 0xe000 boot_app0.bin 0x10000 firmware.bin

If you don't know size of board, use detect as flash_size and use the 8MB image. For Arduino Nano ESP32 use detect and the only image available here

First beta of CapibaraZero

Working Features:

• Wi-Fi support
• BLE support
• BadUSB support
• NFC support(Expect bugs)
• Some network attacks

WIP features:

• SubGHZ
• IR

Flash using:
python3 esptool.py --chip esp32s3 --port UPLOAD_PORT --baud 460800 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 80m --flash_size FLASH_SIZE(16MB or 8MB) 0x0000 bootloader.bin 0x8000 partitions.bin 0xe000 boot_app0.bin 0x10000 firmware.bin