StakingFactory.sol

// File: @openzeppelin/contracts/utils/Context.sol

// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin/contracts/access/Ownable.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// File: ether-library/contracts/IERC20.sol

pragma solidity >=0.4.0;

interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the token decimals.
     */
    function decimals() external view returns (uint8);

    /**
     * @dev Returns the token symbol.
     */
    function symbol() external view returns (string memory);

    /**
     * @dev Returns the token name.
     */
    function name() external view returns (string memory);

    /**
     * @dev Returns the erc20 token owner.
     */
    function getOwner() external view returns (address);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount)
        external
        returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address _owner, address spender)
        external
        view
        returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// File: @openzeppelin/contracts/math/SafeMath.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b)
        internal
        pure
        returns (bool, uint256)
    {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(
        uint256 a,
        uint256 b,
        string memory errorMessage
    ) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin/contracts/utils/ReentrancyGuard.sol

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() internal {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// File: @openzeppelin/contracts/utils/Address.sol

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{value: value}(
            data
        );
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data)
        internal
        view
        returns (bytes memory)
    {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data)
        internal
        returns (bytes memory)
    {
        return
            functionDelegateCall(
                target,
                data,
                "Address: low-level delegate call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: ether-library/contracts/SafeERC20.sol

pragma solidity ^0.6.0;

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transfer.selector, to, value)
        );
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
        );
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.approve.selector, spender, value)
        );
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(
            value
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(
            value,
            "SafeERC20: decreased allowance below zero"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(
            data,
            "SafeERC20: low-level call failed"
        );
        if (returndata.length > 0) {
            // Return data is optional
            // solhint-disable-next-line max-line-length
            require(
                abi.decode(returndata, (bool)),
                "SafeERC20: ERC20 operation did not succeed"
            );
        }
    }
}


// File: contracts/StakingInitializable.sol

pragma solidity 0.6.12;

contract StakingInitializable is Ownable, ReentrancyGuard {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // The address of the staking factory
    address public STAKING_FACTORY;

    // Whether a limit is set for users
    bool public hasUserLimit;

    // Whether it is initialized
    bool public isInitialized;

    // Accrued token per share
    uint256 public accTokenPerShare;

    // The block number when reward ends.
    uint256 public endBlock;

    // The block number when reward starts.
    uint256 public startBlock;

    // The block number of the last pool update
    uint256 public lastRewardBlock;

    // The deposit fee
    uint16 public depositFee;

    // The withdraw fee when stake before the locked time
    uint16 public withdrawFee;

    // The withdraw lock period
    uint256 public lockPeriod;

    // The fee address
    address payable public feeAddress;

    // The pool limit (0 if none)
    uint256 public poolLimitPerUser;

    // reward tokens created per block.
    uint256 public rewardPerBlock;

    uint16 public constant MAX_DEPOSIT_FEE = 2000;
    uint16 public constant MAX_WITHDRAW_FEE = 2000;
    uint256 public constant MAX_LOCK_PERIOD = 30 days;
    uint256 public constant MAX_EMISSION_RATE = 10**7;

    // The precision factor
    uint256 public PRECISION_FACTOR;

    // The reward token
    IERC20 public rewardToken;

    // The staked token
    IERC20 public stakedToken;

    // Total supply of staked token
    uint256 public stakedSupply;

    // Info of each user that stakes tokens (stakedToken)
    mapping(address => UserInfo) public userInfo;

    struct UserInfo {
        uint256 amount; // How many staked tokens the user has provided
        uint256 rewardDebt; // Reward debt
        uint256 lastDepositedAt; // Last deposited time
    }

    event AdminTokenRecovery(address tokenRecovered, uint256 amount);
    event UserDeposited(address indexed user, uint256 amount);
    event EmergencyWithdrawn(address indexed user, uint256 amount);
    event EmergencyRewardWithdrawn(uint256 amount);
    event StartAndEndBlocksUpdated(uint256 startBlock, uint256 endBlock);
    event RewardPerBlockUpdated(uint256 oldValue, uint256 newValue);
    event DepositFeeUpdated(uint16 oldValue, uint16 newValue);
    event WithdrawFeeUpdated(uint16 oldValue, uint16 newValue);
    event LockPeriodUpdated(uint256 oldValue, uint256 newValue);
    event FeeAddressUpdated(address oldAddress, address newAddress);
    event PoolLimitUpdated(uint256 oldValue, uint256 newValue);
    event RewardsStopped(uint256 blockNumber);
    event UserWithdrawn(address indexed user, uint256 amount);

    constructor() public {
        STAKING_FACTORY = msg.sender;
    }

    /**
     * @notice Initialize the contract
     * @param _stakedToken: staked token address
     * @param _rewardToken: reward token address
     * @param _rewardPerBlock: reward per block (in rewardToken)
     * @param _startBlock: start block
     * @param _endBlock: end block
     * @param _poolLimitPerUser: pool limit per user in stakedToken (if any, else 0)
     * @param _depositFee: deposit fee
     * @param _withdrawFee: withdraw fee
     * @param _lockPeriod: lock period
     * @param _feeAddress: fee address
     * @param _admin: admin address with ownership
     */
    function initialize(
        IERC20 _stakedToken,
        IERC20 _rewardToken,
        uint256 _rewardPerBlock,
        uint256 _startBlock,
        uint256 _endBlock,
        uint256 _poolLimitPerUser,
        uint16 _depositFee,
        uint16 _withdrawFee,
        uint256 _lockPeriod,
        address payable _feeAddress,
        address _admin
    ) external {
        require(!isInitialized, "Already initialized");
        require(msg.sender == STAKING_FACTORY, "Not factory");
        require(_stakedToken.totalSupply() >= 0, "Invalid stake token");
        require(_rewardToken.totalSupply() >= 0, "Invalid reward token");
        require(_feeAddress != address(0), "Invalid zero address");

        _stakedToken.balanceOf(address(this));
        _rewardToken.balanceOf(address(this));
        // require(_stakedToken != _rewardToken, "stakedToken must be different from rewardToken");
        require(_startBlock > block.number, "startBlock cannot be in the past");
        require(
            _startBlock < _endBlock,
            "startBlock must be lower than endBlock"
        );

        // Make this contract initialized
        isInitialized = true;

        stakedToken = _stakedToken;
        rewardToken = _rewardToken;
        rewardPerBlock = _rewardPerBlock;
        startBlock = _startBlock;
        endBlock = _endBlock;
        require(_depositFee <= MAX_DEPOSIT_FEE, "Invalid deposit fee");
        depositFee = _depositFee;
        require(_withdrawFee <= MAX_WITHDRAW_FEE, "Invalid withdraw fee");
        withdrawFee = _withdrawFee;
        require(_lockPeriod <= MAX_LOCK_PERIOD, "Invalid lock period");
        lockPeriod = _lockPeriod;

        feeAddress = _feeAddress;

        if (_poolLimitPerUser > 0) {
            hasUserLimit = true;
            poolLimitPerUser = _poolLimitPerUser;
        }

        uint256 decimalsRewardToken = uint256(rewardToken.decimals());
        require(decimalsRewardToken < 30, "Must be inferior to 30");

        PRECISION_FACTOR = uint256(10**(uint256(30).sub(decimalsRewardToken)));

        // Set the lastRewardBlock as the startBlock
        lastRewardBlock = startBlock;

        // Transfer ownership to the admin address who becomes owner of the contract
        transferOwnership(_admin);
    }

    /*
     * @notice Deposit staked tokens and collect reward tokens (if any)
     * @param _amount: amount to withdraw (in rewardToken)
     */
    function deposit(uint256 _amount) external nonReentrant {
        UserInfo storage user = userInfo[msg.sender];

        if (hasUserLimit) {
            require(
                _amount.add(user.amount) <= poolLimitPerUser,
                "User amount above limit"
            );
        }

        _updatePool();

        if (user.amount > 0) {
            uint256 pending = user
                .amount
                .mul(accTokenPerShare)
                .div(PRECISION_FACTOR)
                .sub(user.rewardDebt);
            if (pending > 0) {
                safeRewardTransfer(msg.sender, pending);
            }
        }

        if (_amount > 0) {
            uint256 balanceBefore = stakedToken.balanceOf(address(this));
            stakedToken.safeTransferFrom(msg.sender, address(this), _amount);
            _amount = stakedToken.balanceOf(address(this)).sub(balanceBefore);
            uint256 feeAmount = 0;

            if (depositFee > 0) {
                feeAmount = _amount.mul(depositFee).div(10000);
                if (feeAmount > 0) {
                    stakedToken.safeTransfer(feeAddress, feeAmount);
                }
            }

            user.amount = user.amount.add(_amount).sub(feeAmount);
            user.lastDepositedAt = block.timestamp;
            stakedSupply = stakedSupply.add(_amount).sub(feeAmount);
        }

        user.rewardDebt = user.amount.mul(accTokenPerShare).div(
            PRECISION_FACTOR
        );

        emit UserDeposited(msg.sender, _amount);
    }

    /*
     * @notice Withdraw staked tokens and collect reward tokens
     * @param _amount: amount to withdraw (in rewardToken)
     */
    function withdraw(uint256 _amount) external nonReentrant {
        UserInfo storage user = userInfo[msg.sender];
        require(
            stakedSupply >= _amount && user.amount >= _amount,
            "Amount to withdraw too high"
        );

        _updatePool();

        uint256 pending = user
            .amount
            .mul(accTokenPerShare)
            .div(PRECISION_FACTOR)
            .sub(user.rewardDebt);

        if (_amount > 0) {
            user.amount = user.amount.sub(_amount);
            stakedSupply = stakedSupply.sub(_amount);
            // Check if lock period passed
            if (user.lastDepositedAt.add(lockPeriod) > block.timestamp) {
                uint256 feeAmount = _amount.mul(withdrawFee).div(10000);
                if (feeAmount > 0) {
                    _amount = _amount.sub(feeAmount);
                    stakedToken.safeTransfer(feeAddress, feeAmount);
                }
            }
            if (_amount > 0) {
                stakedToken.safeTransfer(msg.sender, _amount);
            }
        }

        if (pending > 0) {
            safeRewardTransfer(msg.sender, pending);
        }

        user.rewardDebt = user.amount.mul(accTokenPerShare).div(
            PRECISION_FACTOR
        );

        emit UserWithdrawn(msg.sender, _amount);
    }

    /**
     * @notice Safe reward transfer, just in case if rounding error causes pool to not have enough reward tokens.
     * @param _to receiver address
     * @param _amount amount to transfer
     * @return realAmount amount sent to the receiver
     */
    function safeRewardTransfer(address _to, uint256 _amount)
        internal
        returns (uint256 realAmount)
    {
        uint256 rewardBalance = rewardToken.balanceOf(address(this));
        if (_amount > 0 && rewardBalance > 0) {
            realAmount = _amount;
            // When there is not enough reward balance, just send available rewards
            if (realAmount > rewardBalance) {
                realAmount = rewardBalance;
            }

            // When staked token is same as reward token, rewarding amount should not occupy staked amount
            if (
                address(stakedToken) != address(rewardToken) ||
                stakedSupply.add(realAmount) <= rewardBalance
            ) {
                rewardToken.safeTransfer(_to, realAmount);
            } else if (stakedSupply < rewardBalance) {
                realAmount = rewardBalance.sub(stakedSupply);
                rewardToken.safeTransfer(_to, realAmount);
            } else {
                realAmount = 0;
            }
        } else {
            realAmount = 0;
        }

        return realAmount;
    }

    /**
     * @notice Withdraw staked tokens without caring about rewards rewards
     * @dev Needs to be for emergency.
     */
    function emergencyWithdraw() external nonReentrant {
        UserInfo storage user = userInfo[msg.sender];
        uint256 amountToTransfer = user.amount;
        user.amount = 0;
        user.rewardDebt = 0;
        stakedSupply = stakedSupply.sub(amountToTransfer);

        if (amountToTransfer > 0) {
            stakedToken.safeTransfer(msg.sender, amountToTransfer);
        }

        emit EmergencyWithdrawn(msg.sender, amountToTransfer);
    }

    /**
     * @notice Withdraw all reward tokens
     * @dev Only callable by owner. Needs to be for emergency.
     */
    function emergencyRewardWithdraw(uint256 _amount) external onlyOwner {
        require(
            startBlock > block.number || endBlock < block.number,
            "Not allowed to remove reward tokens while pool is live"
        );
        safeRewardTransfer(msg.sender, _amount);

        emit EmergencyRewardWithdrawn(_amount);
    }

    /**
     * @notice It allows the admin to recover wrong tokens sent to the contract
     * @param _tokenAddress: the address of the token to withdraw
     * @param _tokenAmount: the number of tokens to withdraw
     * @dev This function is only callable by admin.
     */
    function recoverWrongTokens(address _tokenAddress, uint256 _tokenAmount)
        external
        onlyOwner
    {
        require(
            _tokenAddress != address(stakedToken),
            "Cannot be staked token"
        );
        require(
            _tokenAddress != address(rewardToken),
            "Cannot be reward token"
        );

        IERC20(_tokenAddress).safeTransfer(msg.sender, _tokenAmount);

        emit AdminTokenRecovery(_tokenAddress, _tokenAmount);
    }

    /*
     * @notice Stop rewards
     * @dev Only callable by owner
     */
    function stopReward() external onlyOwner {
        require(startBlock < block.number, "Pool has not started");
        require(block.number <= endBlock, "Pool has ended");
        endBlock = block.number;

        emit RewardsStopped(block.number);
    }

    /*
     * @notice Update pool limit per user
     * @dev Only callable by owner.
     * @param _hasUserLimit: whether the limit remains forced
     * @param _poolLimitPerUser: new pool limit per user
     */
    function updatePoolLimitPerUser(
        bool _hasUserLimit,
        uint256 _poolLimitPerUser
    ) external onlyOwner {
        require(hasUserLimit, "Must be set");
        uint256 oldValue = poolLimitPerUser;
        if (_hasUserLimit) {
            require(
                _poolLimitPerUser > poolLimitPerUser,
                "New limit must be higher"
            );
            poolLimitPerUser = _poolLimitPerUser;
        } else {
            hasUserLimit = _hasUserLimit;
            poolLimitPerUser = 0;
        }
        emit PoolLimitUpdated(oldValue, _poolLimitPerUser);
    }

    /*
     * @notice Update reward per block
     * @dev Only callable by owner.
     * @param _rewardPerBlock: the reward per block
     */
    function updateRewardPerBlock(uint256 _rewardPerBlock) external onlyOwner {
        require(rewardPerBlock != _rewardPerBlock, "Same value alrady set");
        uint256 rewardDecimals = uint256(rewardToken.decimals());
        require(
            _rewardPerBlock <= MAX_EMISSION_RATE.mul(10**rewardDecimals),
            "Out of maximum emission rate"
        );
        _updatePool();
        emit RewardPerBlockUpdated(rewardPerBlock, _rewardPerBlock);
        rewardPerBlock = _rewardPerBlock;
    }

    /*
     * @notice Update deposit fee
     * @dev Only callable by owner.
     * @param _depositFee: the deposit fee
     */
    function updateDepositFee(uint16 _depositFee) external onlyOwner {
        require(depositFee != _depositFee, "Same vaue already set");
        require(_depositFee <= MAX_DEPOSIT_FEE, "Invalid deposit fee");
        emit DepositFeeUpdated(depositFee, _depositFee);
        depositFee = _depositFee;
    }

    /*
     * @notice Update withdraw fee
     * @dev Only callable by owner.
     * @param _withdrawFee: the deposit fee
     */
    function updateWithdrawFee(uint16 _withdrawFee) external onlyOwner {
        require(withdrawFee != _withdrawFee, "Same value already set");
        require(_withdrawFee <= MAX_WITHDRAW_FEE, "Invalid withdraw fee");
        emit WithdrawFeeUpdated(withdrawFee, _withdrawFee);
        withdrawFee = _withdrawFee;
    }

    /*
     * @notice Update withdraw lock period
     * @dev Only callable by owner.
     * @param _lockPeriod: the withdraw lock period
     */
    function updateLockPeriod(uint256 _lockPeriod) external onlyOwner {
        require(lockPeriod != _lockPeriod, "Same value already set");
        require(_lockPeriod <= MAX_LOCK_PERIOD, "Exceeds max lock period");
        emit LockPeriodUpdated(lockPeriod, _lockPeriod);
        lockPeriod = _lockPeriod;
    }

    /*
     * @notice Update fee address
     * @dev Only callable by owner.
     * @param _feeAddress: the fee address
     */
    function updateFeeAddress(address _feeAddress) external onlyOwner {
        require(_feeAddress != address(0), "Invalid zero address");
        require(feeAddress != _feeAddress, "Same value already set");
        require(feeAddress != _feeAddress, "Same fee address already set");
        emit FeeAddressUpdated(feeAddress, _feeAddress);
        feeAddress = payable(_feeAddress);
    }

    /**
     * @notice It allows the admin to update start and end blocks
     * @dev This function is only callable by owner.
     * @param _startBlock: the new start block
     * @param _endBlock: the new end block
     */
    function updateStartAndEndBlocks(uint256 _startBlock, uint256 _endBlock)
        external
        onlyOwner
    {
        require(block.number < startBlock, "Pool has started");
        require(
            _startBlock < _endBlock,
            "New startBlock must be lower than new endBlock"
        );
        require(
            block.number < _startBlock,
            "New startBlock must be higher than current block"
        );

        startBlock = _startBlock;
        endBlock = _endBlock;

        // Set the lastRewardBlock as the startBlock
        lastRewardBlock = startBlock;

        emit StartAndEndBlocksUpdated(_startBlock, _endBlock);
    }

    /*
     * @notice View function to see pending reward on frontend.
     * @param _user: user address
     * @return Pending reward for a given user
     */
    function pendingReward(address _user) external view returns (uint256) {
        UserInfo storage user = userInfo[_user];
        if (block.number > lastRewardBlock && stakedSupply != 0) {
            uint256 multiplier = _getMultiplier(lastRewardBlock, block.number);
            uint256 rewardAmount = multiplier.mul(rewardPerBlock);
            uint256 adjustedTokenPerShare = accTokenPerShare.add(
                rewardAmount.mul(PRECISION_FACTOR).div(stakedSupply)
            );
            return
                user
                    .amount
                    .mul(adjustedTokenPerShare)
                    .div(PRECISION_FACTOR)
                    .sub(user.rewardDebt);
        } else {
            return
                user.amount.mul(accTokenPerShare).div(PRECISION_FACTOR).sub(
                    user.rewardDebt
                );
        }
    }

    /*
     * @notice Update reward variables of the given pool to be up-to-date.
     */
    function _updatePool() internal {
        if (block.number <= lastRewardBlock) {
            return;
        }

        if (stakedSupply == 0) {
            lastRewardBlock = block.number;
            return;
        }

        uint256 multiplier = _getMultiplier(lastRewardBlock, block.number);
        uint256 rewardAmount = multiplier.mul(rewardPerBlock);
        accTokenPerShare = accTokenPerShare.add(
            rewardAmount.mul(PRECISION_FACTOR).div(stakedSupply)
        );
        lastRewardBlock = block.number;
    }

    /*
     * @notice Return reward multiplier over the given _from to _to block.
     * @param _from: block to start
     * @param _to: block to finish
     */
    function _getMultiplier(uint256 _from, uint256 _to)
        internal
        view
        returns (uint256)
    {
        if (_to <= endBlock) {
            return _to.sub(_from);
        } else if (_from >= endBlock) {
            return 0;
        } else {
            return endBlock.sub(_from);
        }
    }
}

// File: contracts/StakingFactory.sol

pragma solidity 0.6.12;

contract StakingFactory is Ownable {
    event NewStakingContract(address indexed smartChef);

    constructor() public {
        //
    }

    /**
     * @notice Deploy the pool
     * @param _stakedToken: staked token address
     * @param _rewardToken: reward token address
     * @param _rewardPerBlock: reward per block (in rewardToken)
     * @param _startBlock: start block
     * @param _endBlock: end block
     * @param _depositFee: deposit fee
     * @param _poolLimitPerUser: pool limit per user in stakedToken (if any, else 0)
     * @param _feeAddress: address which the fee sent to
     * @param _admin: admin address with ownership
     */
    function deployPool(
        IERC20 _stakedToken,
        IERC20 _rewardToken,
        uint256 _rewardPerBlock,
        uint256 _startBlock,
        uint256 _endBlock,
        uint256 _poolLimitPerUser,
        uint16 _depositFee,
        uint16 _withdrawFee,
        uint256 _lockPeriod,
        address payable _feeAddress,
        address _admin
    ) external onlyOwner {
        bytes memory bytecode = type(StakingInitializable).creationCode;
        bytes32 salt = keccak256(
            abi.encodePacked(_stakedToken, _rewardToken, _startBlock)
        );
        address stakingAddress;

        assembly {
            stakingAddress := create2(
                0,
                add(bytecode, 32),
                mload(bytecode),
                salt
            )
        }

        StakingInitializable(stakingAddress).initialize(
            _stakedToken,
            _rewardToken,
            _rewardPerBlock,
            _startBlock,
            _endBlock,
            _poolLimitPerUser,
            _depositFee,
            _withdrawFee,
            _lockPeriod,
            _feeAddress,
            _admin
        );

        emit NewStakingContract(stakingAddress);
    }
}