Hardware LEDs Indication State

LEDs indication states

Below are LED states for PandwaRF Big Rev.D (1.04) and later revisions.

Simplified LEDs indication states (TL;DR)

Eye	Color	Used for
Right	Orange	USB Charging status
Right	Blue	BLE state
Left	Green	RX
Left	Red	TX/Error

Detailled LEDs indication states

			ISP130301	ISP130301	CC1111	CC1111
Eye	LED id	Color	Pin	Used for	Pin	Used for
Right	2	Orange	2	Charging status	P1_3	USB
Right	4	Blue	8	BLE state	P1_0	-
Left	1	Green	1	-	P1_2	RX
Left	3	Red	0	Error	P1_1	TX

---

Mode	Phase	Red LED	Green LED	Blue LED	Orange LED
ISP130301		Error		BLE activity	Battery status
CC1111		TX activity	RX activity		USB
CCTL Bootloader	Waiting trigger to enter upgrade mode	Blink	Blink
CCTL Bootloader	Waiting in upgrade mode
CCTL Bootloader	Error
CCTL Bootloader	CCTL not needed, entering PM3	Same in opposite phase	Toggle 10 times every 300ms
BLE Bootloader	OTA DFU initializing
BLE Bootloader	OTA DFU ongoing
BLE Firmware	Waiting for BL response			(T:0.6 sec, duty cycle: 50%)
BLE Firmware	Waiting			1 Hz
BLE Firmware	BLE Advertising			0.2 Hz
BLE Firmware	BLE Connected
BLE Firmware	Battery Charging				1 Hz
BLE Firmware	Battery Charged
BLE Firmware	Battery Low				0.2 Hz
BLE Firmware	Battery Critical	0.1 Hz			0.1 Hz
BLE Firmware	Whitelist bypass mode			2.5 Hz
BLE Firmware	Whitelist clear	5 Hz		5 Hz
RF Firmware	RF Alive
RF Firmware	RF RX activity		when RX
RF Firmware	RF TX activity	when TX
RF Firmware	Spectrum Analyzer
RF Firmware	RF Jamming