## Klicky Probe with additional holes by StefanRaatz
This is a modified Klicky probe with two holes so that you can feed through the uninsolated part of the cable a little bit more. Gave me better contact
## KlickyVoron 2.4 Direct Mount MGN12 X Carriage by bluedragonx
This is a modified MGN12 X carriage for the Voron 2.4 which directly interfaces with the Klicky. This is based on Arkeet's MGN12 carriage
## More Roboust Klicky Probe by oc_geek
Beefier column and revised holes for zip tie (was def too small); reduced height 1mm (was excess) Chanfered bottom in all direction (also sides) on the probe carriage Microswitch body exposed by a tiny bit
## Fixed gantry Klicky dock mount for Legacy by Baltojikale
Modified gantry Klicky Probe to mount on a Voron Legacy, should work without adjustments.
## Adjustable Klicky dock mount for Legacy by Maverick
Modified Klicky Probe to mount on a Voron Legacy. Docking components are designed to allow for adjustments on the Z and Y axis.
## Modded Z endstop for v1.8 by Yeri
Designed for V1.8 "I had originally used the z endstop in the stock position but due to the crashes with the probe attached I extended it in Y by 14 mm -- here's the new stl"