Skip to content

Latest commit

 

History

History
30 lines (19 loc) · 845 Bytes

README.md

File metadata and controls

30 lines (19 loc) · 845 Bytes
Raw

DPMI Measurement Point

Build Status

Install

autoreconf -si # if from git repo
./configure [--with-dag=PREFIX] [--with-pcap] [--without-raw]
make
make install

Running locally

mp --local -v -i pcapeth0 -s eth1 --caplen 96 -o 01::10

Where "pcapeth0" is the device to capture on (eth0, using pcap) and "eth1" is the output interface to broadcast on. 01::10 is the DPMI output address.

mp --local -v- i pcapeth0 --caplen 96 -o myfile.cap

Same as above but saving to myfile.cap instead of broadcasting.

Running with MArCd

mp -v -i dag0 -s eth0

Where "dag0" is the device to capture on (dag0, using DAG-card) and "eth0" is the interface MArCd is running on.