3+ Sensors does not work

[crushndent]

If I have more than 3 sensors on a single channel, the first 2-3 come in, but then repeat up until the MaxDevices.
0: 0xe900000094ed5028,
1: 0x1e3ce1d4435bb828,
2: 0x9c3ce1d443241c28,
3: 0x303ce1e380f9c628,
4: 0x1e3ce1d4435bb828,
5: 0x9c3ce1d443241c28,
6: 0x303ce1e380f9c628,
7: 0x1e3ce1d4435bb828,
8: 0x9c3ce1d443241c28,
9: 0x303ce1e380f9c628,
10: 0x1e3ce1d4435bb828,
11: 0x9c3ce1d443241c28,

[crushndent]

Using ESP32S3 development board with sensor bus on pin 32. Everything else is mostly stock using the example. Using 3.3V sensors but not parasitic powered.
I have tried other channels.
Considering RMT timings?