Skip to content

Latest commit

 

History

History
189 lines (124 loc) · 9.68 KB

How to build - Windows.md

File metadata and controls

189 lines (124 loc) · 9.68 KB
Raw

Building Slic3r on Microsoft Windows

The currently supported way of building Slic3r on Windows is with CMake and MS Visual Studio 2019. CMake installer can be downloaded from the official website.~~

Building with Visual Studio 2017 Community Edition. should work too.

How to get the source code

You have to gitclone the repository

git clone https://github.com/supermerill/SuperSlicer.git

and then you have to clone the profiles submodules

cd resources/profiles
git submodule update

How to build

You have to build the dependancies (in ./deps/build)

cmake .. -G "Visual Studio 16 2019" -A x64
msbuild /m ALL_BUILD.vcxproj

and then build and install Slic3r (in ./build as an elevated Command Prompt - 'Run As Administrator'):

cmake .. -G "Visual Studio 16 2019" -A x64 -DCMAKE_PREFIX_PATH="PATH_TO_Slic3r\deps\build\destdir\usr\local"
msbuild /m /P:Configuration=Release INSTALL.vcxproj

You can also build it in visual studio, for that open the .sln. Note that you need to have libgmp-10.dll and libmpfr-4.dll next to your built Slic3r. You can get them from any Slic3r release: So copy these two dlls from your deps-build dir (default: "\deps\build\destdir\usr\local\bin") into the target installation dir of Slic3r (default: "C:\Program Files (x86)\Slic3r")

If you want to create the zipped release, you can follow this script.

Old doc, not up-to-date:

Building the dependencies package yourself

The dependencies package is built using CMake scripts inside the deps subdirectory of Slic3r sources. (This is intentionally not interconnected with the CMake scripts in the rest of the sources.)

Open the preferred Visual Studio command line (64 or 32 bit variant, or just a cmd window) and cd into the directory with Slic3r sources. Then cd into the deps directory and use these commands to build:

mkdir build
cd build
cmake .. -G "Visual Studio 15 Win64" -DDESTDIR="C:\local\destdir-custom"
msbuild /m ALL_BUILD.vcxproj

You can also use the Visual Studio GUI or other generators as mentioned below.

Note that if you're building a 32-bit variant, you will need to change the "Visual Studio 15 Win64" to just "Visual Studio 15".

Conversely, if you're using Visual Studio version other than 2017, the version number will need to be changed accordingly (-G "Visual Studio 16 2019" -A "x64" for Visual Studio 2019 Community).

The DESTDIR option is the location where the bundle will be installed. This may be customized. If you leave it empty, the DESTDIR will be placed inside the same build directory.

Warning: If the build directory is nested too deep inside other folders, various file paths during the build become too long and the build might fail due to file writing errors (*). For this reason, it is recommended to place the build directory relatively close to the drive root.

Note that the build variant that you may choose using Visual Studio (i.e. Release or Debug etc.) when building the dependency package is not relevant. The dependency build will by default build both the Release and Debug variants regardless of what you choose in Visual Studio. You can disable building of the debug variant by passing the

-DDEP_DEBUG=OFF

option to CMake, this will only produce a Release build.

Refer to the CMake scripts inside the deps directory to see which dependencies are built in what versions and how this is done.

  • Specifically, the problem arises when building boost. Boost build tool appends all build options into paths of intermediate files, which are not handled correctly by either b2.exe or possibly ninja (?).

Building Slic3r with Visual Studio

First obtain the Slic3r sources via either git or by extracting the source archive.

Then you will need to note down the so-called 'prefix path' to the dependencies, this is the location of the dependencies packages + \usr\local appended.

When ready, open the relevant Visual Studio command line and cd into the directory with Slic3r sources. Use these commands to prepare Visual Studio solution file:

mkdir build
cd build
cmake .. -G "Visual Studio 15 Win64" -DCMAKE_PREFIX_PATH="C:\local\destdir-custom\usr\local"

Note that the '-G "Visual Studio 15 Win64"' have to be the same as the one you sue for building the dependencies. So replace it the same way your replace it when you built the dependencies (if you did).

If cmake has finished without errors, go to the build directory and open the Slic3r.sln solution file in Visual Studio. Before building, make sure you're building the right project (use one of those starting with Slic3r_app_...) and that you're building with the right configuration, i.e. Release vs. Debug. When unsure, choose Release. Note that you won't be able to build a Debug variant against a Release-only dependencies package.

Installing using the INSTALL project

Slic3r can be run from the Visual Studio or from Visual Studio's build directory (src\Release or src\Debug), but for longer-term usage you might want to install somewhere using the INSTALL project. By default, this installs into C:\Program Files\Slic3r. To customize the install path, use the -DCMAKE_INSTALL_PREFIX=<path of your choice> when invoking cmake.

Building from the command line

There are several options for building from the command line:

To build with msbuild, use the same CMake command as in previous paragraph and then build using

msbuild /m /P:Configuration=Release ALL_BUILD.vcxproj

To build with Ninja or nmake, replace the -G option in the CMake call with -G Ninja or -G "NMake Makefiles" , respectively. Then use either ninja or nmake to start the build.

To install, use msbuild /P:Configuration=Release INSTALL.vcxproj , ninja install , or nmake install .

Building the dependencies package yourself

The dependencies package is built using CMake scripts inside the deps subdirectory of PrusaSlicer sources. (This is intentionally not interconnected with the CMake scripts in the rest of the sources.)

Open the preferred Visual Studio command line (64 or 32 bit variant) and cd into the directory with PrusaSlicer sources. Then cd into the deps directory and use these commands to build:

mkdir build
cd build
cmake .. -G "Visual Studio 12 Win64" -DDESTDIR="C:\local\destdir-custom"
msbuild /m ALL_BUILD.vcxproj

You can also use the Visual Studio GUI or other generators as mentioned above.

The DESTDIR option is the location where the bundle will be installed. This may be customized. If you leave it empty, the DESTDIR will be placed inside the same build directory.

Warning: If the build directory is nested too deep inside other folders, various file paths during the build become too long and the build might fail due to file writing errors (*). For this reason, it is recommended to place the build directory relatively close to the drive root.

Note that the build variant that you may choose using Visual Studio (i.e. Release or Debug etc.) when building the dependency package is not relevant. The dependency build will by default build both the Release and Debug variants regardless of what you choose in Visual Studio. You can disable building of the debug variant by passing the

-DDEP_DEBUG=OFF

option to CMake, this will only produce a Release build.

Refer to the CMake scripts inside the deps directory to see which dependencies are built in what versions and how this is done.

*) Specifically, the problem arises when building boost. Boost build tool appends all build options into paths of intermediate files, which are not handled correctly by either b2.exe or possibly ninja (?).

Noob guide (step by step)

  • Install Visual Studio Community 2019 from visualstudio.microsoft.com/vs/

  • Select all workload options for C++

  • Install git for Windows from gitforwindows.org

    • download and run the exe accepting all defaults

  • Download PrusaSlicer-master.zip from github

    • This example will use the directory c:\PrusaSlicer and unzipped to c:\PrusaSlicer\PrusaSlicer-master\ so this will be the prefix for all the steps. Substitute your as required prefix.

  • Go to the Windows Start Menu and Click on "Visual Studio 2019" folder, then select the ->"x64 Native Tools Command Prompt" to open a command window

    cd c:\PrusaSlicer\PrusaSlicer-master\deps
mkdir build
cd build
cmake .. -G "Visual Studio 16 2019" -DDESTDIR="c:\PrusaSlicer\PrusaSlicer-master"
msbuild /m ALL_BUILD.vcxproj // This took 13.5 minutes on the following machine: core I7-7700K @ 4.2Ghz with 32GB main memory and 20min on an average laptop
cd c:\PrusaSlicer\PrusaSlicer-master\
mkdir build
cd build
cmake .. -G "Visual Studio 16 2019" -DCMAKE_PREFIX_PATH="c:\PrusaSlicer\PrusaSlicer-master\usr\local"

  • Open Visual Studio for c++ development (VS asks this the first time you start it)

Open->Project/Solution or File->Open->Project/Solution (depending on which dialog comes up first)

  • Click on c:\PrusaSlicer\PrusaSlicer-master\build\PrusaSlicer.sln

Debug->Start Debugging or Debug->Start Without debugging

  • PrusaSlicer should start.
  • You're up and running!

Note: Thanks to @douggorgen for the original guide, as an answer for a issue