Fatfish-F16---EdgeTX-2.10.5-DE---Display-is-upside-down

[udodill]

Is there an existing issue for this problem?

• I have searched the existing issues

What part of EdgeTX is the focus of this bug?

Transmitter firmware

Current Behavior

The Fatfish F16 transmitter is delivered with EdgeTX version 2.10.0-selfbuild, date 2024-05-20. After updating EdgeTX to version 2.10.5, the output on the display is upside down.

Expected Behavior

The information on the display should be displayed normally.

Steps To Reproduce

Turn on the transmitter.

Version

2.10.5

Transmitter

Fatfish F16

Operating System (OS)

No response

OS Version

not relevant

Anything else?

[richardclli]

There are 2 versions of Fatfish hardware, in which the LCD orientation is different, and the firmware should be able to detect and choose the correct orientation properly. It is strange that the LCD orientation detection did not operate properly. The detection is done by the PCBREV information hardwired in the hardware. Not sure what is wrong though.

When did you get this radio?

[udodill]

Hello, Thank you very much for the feedback. In edgetx 2.11.0 Nightly the error is gone and the display is the right way round again. Am 4. Dezember 2024 06:43:27 MEZ schrieb richardclli ***@***.***>:

There are 2 versions of Fatfish hardware, in which the LCD orientation is different, and the firmware should be able to detect and choose the correct orientation properly. It is strange that the LCD orientation detection did not operate properly. The detection is done by the PCBREV information hardwired in the hardware. Not sure what is wrong though. -- Reply to this email directly or view it on GitHub: #5673 (comment) You are receiving this because you authored the thread. Message ID: ***@***.***>

Udo Dillschneider, Homburg / Saar