Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Happymodel ES900 wiring #165

Open
gruffalostereo opened this issue Oct 9, 2024 · 2 comments
Open

Happymodel ES900 wiring #165

gruffalostereo opened this issue Oct 9, 2024 · 2 comments

Comments

@gruffalostereo
Copy link

I have two boot pads on my Happymodel ES900 RX. Which pad shoul I solder to the CLK pad on the VRX? Or it does not matter?

Another question: If my VRX has X and L channels, which channel should I set as a highiest (as it required in the manual)?
@pkendall64
Copy link
Contributor

The "boot pad" closest to the GND connector is also a GND pad. The one slight further away is the actual "boot pad"

@gruffalostereo
Copy link
Author

Hm, strange, in my case, everything is vice versa. Checked with the multimeter, upper one is connected with GND. And the pad just over the GND does not connected with ground.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@pkendall64 @gruffalostereo