Information: Smart Battery Protect

[spattinson]

It works fine. The text sensors do not output anything under normal conditions
I tested turning the output off using the app
device_state 249 to 0
off_reason 0 to 4
output_state 1 to 0 - I guess this means whether the device is on or off, through manual switching or alarm
output_voltage changed from 13.6V to 0.4V
I did not configure battery voltage, but it should be the same as input_voltage
I have not configured any binary sensors.
alarm_reason, error, warning_reason are all zero as expected - I could raise the threshold voltage in the app and wait for the voltage to go below that to get different values if required?
Thanks for providing this.