Voltage and current values from mppt

[ondrej0402]

Hi Fabian,
thanks for your contributions, I would like to ask, if its possible to add pv panels values of voltage and current into victron ble communications? Thx Ondrej

[Fabian-Schmidt]

Please ask Victron to add this information to the Bluetooth advertising messages sent by the devices.

Currently I expose all data the advertising message frame contains.

Victron uses the Bluetooth advertising messages in the app for the overview page and as they don't display PV voltage there they are not sent it.

[ondrej0402]

And these messages are not the same like victron send it from device? Because mppt voltage and current are visible in the victron app, connected by bluetooth. Thanks for answer Dňa ut 5. 11. 2024 o 10:48 Fabian ***@***.***> napísala(a):

…

Please ask Victron to add this information to the Bluetooth advertising messages sent by the devices. Currently I expose all data the advertising message frame contains. Victron uses the Bluetooth advertising messages in the app for the overview page and as they don't display PV voltage there they are not sent it. — Reply to this email directly, view it on GitHub <#72 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BGP2M5BGIYUK3TVWQCJZIZ3Z7CH6NAVCNFSM6AAAAABRF7YBKCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINJWG4YDQMBSGI> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[Fabian-Schmidt]

The messages are the same as displayed in the overview page of the app.

When connecting to a device different messages are used.

[Bloodcarver]

I dont understand, the value from bluetooth application do not match the value from victron-ble.
Look at the attached images.

[Fabian-Schmidt]

The mppt device only transmits the battery (output) voltage and not the solar panel voltage.

It is the same values you can see in the app on the overview page, before you connect to the device.

[ondrej0402]

Your solpanelernas spanning use device battery voltage in yaml, you have same value, and same for strom.