No Response on Initial Message

[amansoni7477030]

Sometimes, in the Flowise embedded chat, when a user types a message for the first time, there is a loading period in the chatbot, but then it does not produce any response.

@HenryHengZJ , After reviewing the Flowise embed code, I suggest adding an extra condition in:

https://github.com/FlowiseAI/FlowiseChatEmbed/blob/83576e276a6940c916bded323e4a8bd4a76f0475/src/components/Bot.tsx
https://github.com/FlowiseAI/FlowiseChatEmbed/blob/83576e276a6940c916bded323e4a8bd4a76f0475/src/queries/sendMessageQuery.ts
The condition should check if the websocket is not connected, and if so, produce the output directly. This adjustment could help alleviate the issue to some extent, enabling users with lower CPU and RAM to use it smoothly, as the current Flowise only works well with good CPU and RAM.

Note: I also checked your Digital Ocean video here https://youtu.be/nchOuARbqEk?si=yKvtNbsI9DrX0Hfb and followed the same steps, facing the same issue of websocket connection delay. Thus, I believe addressing this should be a priority.