Pimox is a port of Proxmox to the Raspberry Pi allowing you to build a Proxmox cluster of Rapberry Pi's or even a hybrid cluster of Pis and x86 hardware.
- Raspberry Pi 4
- Pre-installed Debian Bullseye based 64-bit OS (not 32-bit)
- In /etc/network/interfaces, give the Pi a static IP address. You cannot use dhcp.
- In /etc/network/interfaces, remove any IPv6 addresses.
- In /etc/hostname, make sure the Pi has a name.
- In /etc/hosts, make sure this hostname corresponds to the static IP you previous set.
- Do this at the console, not over a network. The network will be reconfigured as part of the install.
- sudo -s
- curl https://raw.githubusercontent.com/pimox/pimox7/master/pimox.sh | sh
- This repo just contains the precompiled debian packages. The original Proxmox sources can be found at https://git.proxmox.com
- The (very minimally) patched sources to rebuild this can be found at https://github.com/pimox