Request to add bedmesh mod to script #582
Keron868
started this conversation in
Features Request
Replies: 0 comments
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
-
I have made an update to the printer.cfg to allow more than 36 mesh points for bed leveling. Which means we can now do meshes bigger than 6x6 like 9x9 meshes etc which works great with KAMP. Is it possible for you to add this to your helper script?
`[prtouch_v2]
pr_version: 1
step_base: 2
z_offset: 0
noz_ex_com: 0.09 #0.09 喷头加热补偿值
tilt_corr_dis:0.05 # //0.05 #热床差补偿值
tri_min_hold: 6000,10000 #2000,10000
tri_max_hold: 13000,60000
pres_cnt: 4
pres0_clk_pins: leveling_mcu:PA7
pres0_sdo_pins: leveling_mcu:PA4
pres1_clk_pins: leveling_mcu:PA6
pres1_sdo_pins: leveling_mcu:PA3
pres2_clk_pins: leveling_mcu:PA2
pres2_sdo_pins: leveling_mcu:PA0
pres3_clk_pins: leveling_mcu:PA5
pres3_sdo_pins: leveling_mcu:PA1
show_msg: False
step_swap_pin: PC10
pres_swap_pin: leveling_mcu:PB1
g28_wait_cool_down: true
pa_clr_down_mm: -0.15
clr_noz_start_x: 130
clr_noz_start_y: 303
clr_noz_len_x: 40
clr_noz_len_y: 2
speeds: 2.5,1.0
tri_hftr_cut: 2,1
tri_lftr_k1: 0.50,0.15
[bed_mesh]
speed: 150
mesh_min: 5,5
mesh_max: 295,295
probe_count: 9,9
fade_start: 1.0
fade_end: 20.0
algorithm: bicubic
bicubic_tension: 0.2`
Beta Was this translation helpful? Give feedback.
All reactions