Document where to load Skew corrections #641
Replies: 3 comments
-
I can confirm that after uninstalling KAMP, the block [gcode_macro START_PRINT] is not commented out and I can load the SKEW calibration profile that I created. If anyone finds a way of having KAMP and loading the SKEW calibration, please document it. |
Beta Was this translation helpful? Give feedback.
-
I added mine in the Machine Start GCode for the printer on OrcaSlicer |
Beta Was this translation helpful? Give feedback.
-
That works, but the skew is a property of the printer, so it should go with the printer. If you sell the printer, lend it, or print files that have been sliced by others, which is a common scenario for a printer at a school, then the slicers won't have the same skew parameters. |
Beta Was this translation helpful? Give feedback.
-
Klipper documents how to do Skew corrections in software at https://www.klipper3d.org/Skew_Correction.html
Once the Skew profile is saved, it is recommended that it be loaded inside the block [gcode_macro START_PRINT], but this block of code is commented out on my gcode_macro.cfg file.
I looked around and found that the [gcode_macro START_PRINT] block that seems to be used in my case resides inside
/Helper-Script/KAMP/Start_Print.cfg
, but I don't think I can modify the content of this file because it shows a lock in the Web interface.What is a good place to load the skew profile by adding a line like this?
SKEW_PROFILE LOAD=calilantern_skew_profile
It would be preferred if this line is not erased by future updates.
Beta Was this translation helpful? Give feedback.
All reactions