diff --git a/docs/_pages/installation/dreame.md b/docs/_pages/installation/dreame.md
index e55b0988304..b6c1e340dd7 100644
--- a/docs/_pages/installation/dreame.md
+++ b/docs/_pages/installation/dreame.md
@@ -302,7 +302,7 @@ Follow these steps to enter fastboot:
 Plug the Breakout PCB into your robot. Make sure that the USB OTG ID Jumper is **NOT** set and plug a cable into
 the Micro USB port.
 
-<img src="./img/dreame_breakout_fel.jpg" alt="Dreame Breakout PCB connected" width="1200" height="700">
+<img src="./img/dreame_breakout_breakout_fel.jpg" alt="Dreame Breakout PCB connected" width="1200" height="700">
 
 1. Press and hold the button on the PCB.
 2. Then, press and hold the power button of the robot. Keep pressing the button on the PCB.
@@ -460,7 +460,7 @@ Here are the steps again:
 Plug the Breakout PCB into your robot. Make sure that the USB OTG ID Jumper is **NOT** set and plug a cable into
 the Micro USB port.
 
-<img src="./img/dreame_breakout_fel.jpg" alt="Dreame Breakout PCB connected" width="1200" height="700">
+<img src="./img/dreame_breakout_breakout_fel.jpg" alt="Dreame Breakout PCB connected" width="1200" height="700">
 
 1. Press and hold the button on the PCB.
 2. Then, press and hold the power button of the robot. Keep pressing the button on the PCB.
diff --git a/docs/_pages/installation/img/dreame_breakout_breakout_fel.jpg b/docs/_pages/installation/img/dreame_breakout_breakout_fel.jpg
new file mode 100644
index 00000000000..22b5cea3596
Binary files /dev/null and b/docs/_pages/installation/img/dreame_breakout_breakout_fel.jpg differ
diff --git a/docs/_pages/installation/img/dreame_breakout_fel.jpg b/docs/_pages/installation/img/dreame_breakout_fel.jpg
deleted file mode 100644
index dca86bf1b7a..00000000000
Binary files a/docs/_pages/installation/img/dreame_breakout_fel.jpg and /dev/null differ