Esp8266-Server.ino

/****************************************************************************************************************************
  ESP8266-Server.ino
  For ESP8266.

  Based on and modified from Gil Maimon's ArduinoWebsockets library https://github.com/gilmaimon/ArduinoWebsockets
  to support STM32F/L/H/G/WB/MP1, nRF52 and SAMD21/SAMD51 boards besides ESP8266 and ESP32


  The library provides simple and easy interface for websockets (Client and Server).
  
  Built by Khoi Hoang https://github.com/khoih-prog/Websockets2_Generic
  Licensed under MIT license
 *****************************************************************************************************************************/
/****************************************************************************************************************************
  ESP8266 Websockets Server : Minimal ESP8266 Websockets Server

  This sketch:
        1. Connects to a WiFi network
        2. Starts a websocket server on port 8080
        3. Waits for connections
        4. Once a client connects, it wait for a message from the client
        5. Sends an "echo" message to the client
        6. closes the connection and goes back to step 3

  Hardware:
        For this sketch you only need an ESP8266 board.

  Originally Created  : 15/02/2019
  Original Author     : By Gil Maimon
  Original Repository : https://github.com/gilmaimon/ArduinoWebsockets

*****************************************************************************************************************************/

#include "defines.h"

#define DEBUG_LOCAL   2

#include <WebSockets2_Generic.h>
#include <ESP8266WiFi.h>

using namespace websockets2_generic;

WebsocketsServer server;

void heartBeatPrint(void)
{
  static int num = 1;

  if (WiFi.status() == WL_CONNECTED)
    Serial.print("H");        // H means server WiFi connected
  else  
    Serial.print("F");        // F means server WiFi not connected
    
  if (num == 80)
  {
    Serial.println();
    num = 1;
  }
  else if (num++ % 10 == 0)
  {
    Serial.print(" ");
  }
}

void check_status()
{
  static unsigned long checkstatus_timeout = 0;

  //KH
#define HEARTBEAT_INTERVAL    10000L
  // Print hearbeat every HEARTBEAT_INTERVAL (10) seconds.
  if ((millis() > checkstatus_timeout) || (checkstatus_timeout == 0))
  {
    heartBeatPrint();
    checkstatus_timeout = millis() + HEARTBEAT_INTERVAL;
  }
}

void setup()
{
  Serial.begin(115200);
  while (!Serial);

  Serial.println("\nStarting ESP8266-Server on " + String(ARDUINO_BOARD));
  Serial.println(WEBSOCKETS2_GENERIC_VERSION);

  // Connect to wifi
  WiFi.begin(ssid, password);

  // Wait some time to connect to wifi
  for (int i = 0; i < 15 && WiFi.status() != WL_CONNECTED; i++)
  {
    Serial.print(".");
    delay(1000);
  }

  if (WiFi.status() == WL_CONNECTED)
    Serial.println("\nWiFi connected");
  else
  {
    Serial.println("\nNo WiFi");
    return;
  }

  server.listen(WEBSOCKETS_PORT);
  
  Serial.print(server.available() ? "WebSockets Server Running and Ready on " : "Server Not Running on ");
  Serial.println(BOARD_NAME);
  Serial.print("IP address: ");
  Serial.print(WiFi.localIP());     //You can get IP address assigned to SAMD
  Serial.print(", Port: ");
  Serial.println(WEBSOCKETS_PORT);    // Websockets Server Port
}

void loop()
{ 
  check_status();
  
  WebsocketsClient client = server.accept();
 
  if (client.available())
  {
    WebsocketsMessage msg = client.readBlocking();

    // log
    Serial.print("Got Message: ");
    Serial.println(msg.data());

    // return echo
    client.send("Echo: " + msg.data());

    // close the connection
    client.close();
  }

  delay(1000);
}