LVL3 arduino project

 /*

https://github.com/Kitecatcher/Bastion.git



//#define CAYENNE_DEBUG
#define CAYENNE_PRINT Serial
#include <CayenneMQTTESP32.h>
int ONOFF ;
const int LED0=16;//GPIO16  to trigger the emergency button
// WiFi network info.
char ssid[] = "----";
char wifiPassword[] = "_______";

// Cayenne authentication info. This should be obtained from the Cayenne Dashboard. Replace the xxxxxxxxxxxx with your MQTT  USERNAME, PASSWORD, and CLIENT_ID
char username[] = "09e43950-1180-11eb-8779-7d56e82df461";  
char password[] = "517d2e1cf5ddafc6abd76fef6caa5349b52080a3";  
char clientID[] = "7731ca90-1180-11eb-a2e4-b32ea624e442"; 
//=============== End Cayenne token and SSID/PW Setting =================
//=======================================================================
// the setup function runs once when you press reset or power the board
const int  = 4;   // The ______1 is wired to ESP32 board pin GPIO04
const int yellow_LED1  = ______2;   // The yellow LED1 is wired to ESP32 board pin GPIO02
const int green_LED1 = 15; // The ______3 is wired to ESP32 board pin GPIO15======
const int red_LED2  = 25;   // The red ______4 is wired to Mega board pin GPIO25
const int yellow_LED2  = 26;   // The yellow _____5 is wired to Mega board pin GPIO 26
const int green_LED2 = 27; // The ______6 is wired to Mega board pin GPIO 27 




Its a lantenern with 13 leds in series. with 2 220 resistors in line 
There is a 5vdc Paad04010bh
Testing fan 
What does series 1.5v aa *4 =?

i have an ardueno 2500 now... i will need to aquier a new esp3200 maby a differant board al together any ideas?




*/