Using an inflatable butt plug to detect pressure changes indicative of pelvic floor contractions, this software, and associated hardware, is used to detect when the user is approaching orgasm and control stimulation accordingly. The net result: automated edging and orgasm denial.
Edge-o-Matic 3000 devices support a WebSocket communication channel to be used on a web UI. The current Web UI can be accessed at nogasm-ui.maustec.io. The source code is at github.com/maustec/nogasm-ui. For control outside your Local Area Network, please consider a port-forwarding software such as Ngrok. You will have to permit insecure content for that domain within Chrome to be able to connect your device while the page is loaded over HTTPS. This cannot be done automatically for you.
Documentation for the WebSocket API can be found in doc/WebSocket.md.
If you have hardware already, please see examples/config.json or your own config.json file
shipped with your SD card. Note that this JSON document does not support comment preprocessing,
and is automatically generated. Here is a quick summary of config variables:
| Key | Type | Default | Note |
|---|---|---|---|
wifi_ssid |
String | "" | Your WiFi SSID. |
wifi_key |
String | "" | Your WiFi Password. |
wifi_on |
Boolean | false | Enable WiFi and the Websocket server. Cannot be enabled if AzureFang is on. |
bt_display_name |
String | "Edge-o-Matic 3000" | AzureFang* device name, you might wanna change this. |
bt_on |
Boolean | false | Enable AzureFang connectivity. Cannot be enabled if WiFi is on. |
force_bt_coex |
Boolean | false | Force AzureFang and WiFi at the same time**. |
led_brightness |
Byte | 128 | Status LED maximum brightness. |
websocket_port |
Int | 80 | Port to listen for incoming Websocket connections. |
use_ssl |
Boolean | false | Enable SSL server, which will eat all your RAM! |
hostname |
String | "eom3k" | Local hostname for your device. |
motor_start_speed |
Byte | 10 | The minimum speed the motor will start at in automatic mode. |
motor_max_speed |
Byte | 128 | Maximum speed for the motor in auto-ramp mode. |
motor_ramp_time_s |
Int | 30 | The time it takes for the motor to reach Motor Max Speed in automatic mode. |
edge_delay |
Int | 10000 | Minimum time (ms) after edge detection before resuming stimulation. |
max_additional_delay |
Int | 10000 | Maximum time (ms) that can be added to the edge delay before resuming stimulation. A random number will be picked between 0 and this setting each cycle. 0 to disable. |
minimum_on_time |
Int | 1000 | Time (ms) after stimulation starts before edge detection is resumed. |
screen_dim_seconds |
Int | 10 | Time, in seconds, before the screen dims. 0 to disable. |
screen_timeout_seconds |
Int | 0 | Time, in seconds, before the screen turns off. 0 to disable. |
pressure_smoothing |
Byte | 5 | Number of samples to take an average of. Higher results in lag and lower resolution! |
classic_serial |
Boolean | false | Output continuous stream of arousal data over serial for backwards compatibility with other software. |
sensitivity_threshold |
Int | 600 | The arousal threshold for orgasm detection. Lower values stop sooner. |
update_frequency_hz |
Int | 50 | Update frequency for pressure readings and arousal steps. Higher = crash your serial monitor. |
sensor_sensitivity |
Byte | 128 | Analog pressure prescaling. Please see instruction manual. |
use_average_values |
Boolean | false | Use average values when calculating arousal. This smooths noisy data. |
vibration_mode |
VibrationMode | RampStop | Vibration Mode for main vibrator control. |
use_post_orgasm |
Boolean | false | Use post-orgasm torture mode and functionality. |
clench_pressure_sensitivity |
Int | 200 | Minimum additional Arousal level to detect clench. See manual. |
clench_threshold_2_orgasm |
Int | 35 | Threshold variable that is tick counts of clench to detect orgasm. See manual. |
clench_detector_in_edging |
Boolean | false | Use the clench detector to adjust Arousal. See manual. |
auto_edging_duration_minutes |
Int | 30 | How long to edge before permiting an orgasm. |
post_orgasm_duration_seconds |
Int | 10 | How long to stimulate after orgasm detected. |
edge_menu_lock |
Boolean | false | Deny access to menu starting in the edging session. |
post_orgasm_menu_lock |
Boolean | false | Deny access to menu starting after orgasm detected. |
max_clench_duration |
Int | 100 | Duration the clench detector can raise arousal if clench detector turned on in edging session. |
* AzureFang refers to a common wireless technology that is blue and involves chewing face-rocks. However, the trademark holders of this technology require the name to be licensed, so we're totally just using AzureFang.
** AzureFang and WiFi coexistance is EXPERIMENTAL and may cause system instability. If your device resets with both of these turned on, please turn them back off. Additionally, it might be helpful to post some info in discord of the last serial dump on the console when your device reset, assuming you have a console connected.
| ID | Name | Description |
|---|---|---|
| 1 | Ramp-Stop | Vibrator ramps up from set min speed to max speed, stopping abruptly on arousal threshold crossing. |
| 2 | Depletion | Vibrator speed ramps up from min to max, but is reduced as arousal approaches threshold. |
| 3 | Enhancement | Vibrator speed ramps up as arousal increases, holding a peak for ramp_time. |
| 0 | Global Sync | When set on secondary vibrators, they will follow the primary vibrator speed. |
| Seconds | Description |
|---|---|
| 0 | Turn off stimulation at orgasm dectection - Failed Orgasm |
| 5-15 | Turn off stimulation after amount of seconds - Normal orgasm |
| 16-4095 | Turn off stimulation after amount of seconds - Post orgasm Torture |
Hardware builds for this project can be purchased from Maus-Tec Electronics, at maustec.io/eom.
Hardware development and assembly helps keep pizza in the freezer and a roof over the head of the maintainer. Your support helps a small business grow into something neat, and ensures future devices like this can continue to be produced.
The User Guide for the hardware can be downloaded at doc/Edge-o-Matic_UserGuide.docx.
Information for emulating the hardware, including a breadboard-friendly pinout for the ESP32, will be available once again following a rewrite of the hardware layer of this code to align with current production units and variances in part availability. All production units shipped are compatible with the main code branch here on GitHub.
The RJ45 Jack IS NOT ETHERNET! That is a balanced twisted pair extension of the I2C bus on the controller, and is available as a convenience for future development, dongles, and accessories. It carries +5V and SDA+/-, SCL+/- signals. You must use an I2C redriver IC or compatible module to interface with this. Additionaly, this is terminated at 100ohm assuming standard CAT5. We recommend SparkFun's BOB-14589.
| Pin | Signal |
|---|---|
| 1 | SCL- |
| 2 | SCL+ |
| 3 | NC |
| 4 | +5V |
| 5 | GND |
| 6 | NC |
| 7 | SDA- |
| 8 | SDA+ |
Any changes to configuration values should be linted. Run ruby bin/config_lint.rb to check documentation, serializers
and structs for consistency.
Thanks for readin'!