Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

seems not all parameters are there #123

Open
paqpaqpaq opened this issue May 28, 2024 · 7 comments
Open

seems not all parameters are there #123

paqpaqpaq opened this issue May 28, 2024 · 7 comments
Assignees
@LukasGrebe
Labels
documentation Improvements or additions to documentation

Comments

@paqpaqpaq
Copy link

paqpaqpaq commented May 28, 2024 •
edited
Loading

This my config:

scanconfig: true
loglevel_all: notice
mqtttopic: ebusd
mqttint: /etc/ebusd/mqtt-hassio.cfg
mqttjson: true
mode: enh
network_device: 192.168.108.39:3335
configpath: /config/ebusd-configuration/ebusd-2.1.x/en

2ad9b828-ebusd:/# ebusctl info
version: ebusd 23.2.p20230716
update check: version 23.3 available, broadcast.csv: different version available, memory.csv: different version available, vaillant/08.hmu.csv: different version available, vaillant/broadcast.csv: different version available, vaillant/errors.inc: different version available, vaillant/general.csv: different version available, vaillant/hcmode.inc: different version available
device: 192.168.108.39:3335, enhanced
signal: acquired
symbol rate: 122
max symbol rate: 173
min arbitration micros: 1
max arbitration micros: 75
min symbol latency: 15
max symbol latency: 55
scan: finished
reconnects: 0
masters: 5
messages: 235
conditional: 0
poll: 89
update: 15
address 03: master #11
address 08: slave #11, scanned "MF=Vaillant;ID=HMU00;SW=0902;HW=5103", loaded "vaillant/08.hmu.csv"
address 10: master #2
address 15: slave #2, scanned "MF=Vaillant;ID=CTLV3;SW=0709;HW=3704"
address 31: master #8, ebusd
address 36: slave #8, ebusd
address 71: master #9
address 76: slave #9, scanned "MF=Vaillant;ID=VWZIO;SW=0202;HW=0103"
address f1: master #10
address f6: slave #10, scanned "MF=Vaillant;ID=NETX3;SW=0119;HW=0404"

Despite pointing at a custom file for my 08.hmu, it seems it is not loading the correct csv?
The display of the Vaillant VZWAI e.g. does show compressor RPS, modulation rate, flow, etc, but the output of the addon does not.
These parameters are present though in the linked csv
Scherm­afbeelding 2024-05-28 om 13 23 40

How can I address this issue?
@paqpaqpaq
Copy link
Author

This is a part of the log by the way:

2024-05-28 14:39:37.074 [update notice] received read hmu unknownMB513h0528 QQ=10: 01
2024-05-28 14:39:37.306 [update notice] sent poll-read hmu OutdoorTemp QQ=31: -99.0
2024-05-28 14:39:37.487 [update notice] received update-read broadcast unknownBCb510h06 QQ=10: 00
2024-05-28 14:39:37.874 [update notice] received unknown MS cmd: 0376b51206130017000006 / 0200ff
2024-05-28 14:39:38.117 [update notice] received read hmu State07 QQ=71: 0;0.4;Eco mode HP off;ready
2024-05-28 14:39:41.612 [update notice] received read hmu State07 QQ=71: 0;0.4;Eco mode HP off;ready
2024-05-28 14:39:43.294 [update notice] sent poll-read hmu ReturnTemp QQ=31: 20.1
2024-05-28 14:39:43.428 [update notice] received unknown MS cmd: 7108b51a03040732 / 0e0707c0cfc07b3c00b01b20000000
2024-05-28 14:39:43.750 [update notice] received unknown MS cmd: 7108b51a03040833 / 0e080000c08b020000000000000000
2024-05-28 14:39:44.133 [update notice] received read hmu State01 QQ=10: 21.5;20.0;-;-;-;off
2024-05-28 14:39:44.293 [update notice] received unknown MS cmd: 7108b51a03040934 / 0e09cf2000c0022101001800061800
2024-05-28 14:39:44.471 [update notice] received unknown MS cmd: 1076b5110101 / 09ffff3014ffff0000ff
2024-05-28 14:39:44.644 [update notice] received unknown MS cmd: 7108b51a03040a35 / 0e0a00000000000100900100001000
2024-05-28 14:39:44.839 [update notice] received unknown MS cmd: 1076b512030f0001 / 070080020080ff00
2024-05-28 14:39:45.130 [update notice] received unknown MS cmd: 7108b51a03040b36 / 0e0b00000000000000000000000000
2024-05-28 14:39:45.342 [update notice] received unknown MS cmd: f115b52406020002001e00 / 0601021e000000
2024-05-28 14:39:45.657 [update notice] received read hmu State07 QQ=71: 0;0.4;Eco mode HP off;ready
2024-05-28 14:39:45.750 [update notice] received unknown MS cmd: f115b52406020003002200 / 08030322000000a041
2024-05-28 14:39:45.822 [update notice] received unknown MS cmd: 0376b51206130017000006 / 0200ff
2024-05-28 14:39:45.999 [update notice] received unknown MS cmd: f115b52406020003001400 / 08010314000000a041
2024-05-28 14:39:46.181 [update notice] received unknown MS cmd: f115b52406020003000600 / 06030306000200
2024-05-28 14:39:46.273 [update notice] received update-write hmu SetMode QQ=10: 00 00 ff ff ff 07 00 00
2024-05-28 14:39:46.425 [update notice] received unknown MS cmd: f115b52406020003001500 / 08010315000000c041
2024-05-28 14:39:46.593 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101
2024-05-28 14:39:46.743 [update notice] received unknown MS cmd: f115b52406020003012200 / 08020322000000a841
2024-05-28 14:39:48.011 [update notice] received unknown MS cmd: f115b52406020003010600 / 06020306000100
2024-05-28 14:39:49.042 [update notice] received read hmu State07 QQ=71: 0;0.4;Eco mode HP off;ready
2024-05-28 14:39:49.344 [update notice] sent poll-read hmu RunDataAirIntakeTemp QQ=31: 20.583
2024-05-28 14:39:49.365 [bus notice] arbitration won in invalid state ready
2024-05-28 14:39:51.853 [update notice] received unknown MS cmd: f115b52406020003001b00 / 0601031b000000
2024-05-28 14:39:52.025 [update notice] received unknown MS cmd: f115b52406020003011b00 / 0600031b000000
2024-05-28 14:39:52.544 [update notice] received read hmu State07 QQ=71: 0;0.4;Eco mode HP off;ready
2024-05-28 14:39:52.794 [update notice] received read hmu State01 QQ=f1: 21.5;20.0;-;-;-;off
2024-05-28 14:39:52.986 [update notice] received read hmu State00 QQ=f1: 21.56;23;0.0;off;0;0;inactive;0.0
2024-05-28 14:39:53.548 [update notice] received read hmu State01 QQ=10: 21.5;20.0;-;-;-;off
2024-05-28 14:39:53.861 [update notice] received unknown MS cmd: 1076b5110101 / 09ffff2014ffff0000ff
2024-05-28 14:39:54.178 [update notice] received unknown MS cmd: 1076b512030f0001 / 070080020080ff00
2024-05-28 14:39:54.301 [update notice] received unknown MS cmd: 0376b51206130017000006 / 0200ff
2024-05-28 14:39:55.132 [bus error] poll hmu RunDataBuildingCPumpPower failed: ERR: SYN received
2024-05-28 14:39:56.061 [update notice] received unknown MS cmd: 1076b51009000000ffffff050000 / 0101
2024-05-28 14:39:56.131 [update notice] received read hmu State07 QQ=71: 0;0.4;Eco mode HP off;ready
2024-05-28 14:39:59.290 [update notice] received read hmu State07 QQ=71: 0;0.4;Eco mode HP off;ready
2024-05-28 14:40:01.328 [update notice] sent poll-read hmu RunDataCompressorInletTemp QQ=31: 22.8924
2024-05-28 14:40:01.822 [update notice] received unknown MS cmd: 0376b51206130017000006 / 0200ff
2024-05-28 14:40:02.750 [update notice] received read hmu State07 QQ=71: 0;0.4;Eco mode HP off;ready
2024-05-28 14:40:02.974 [update notice] received read hmu State01 QQ=10: 21.5;20.0;-;-;-;off
2024-05-28 14:40:03.236 [update notice] received unknown MS cmd: 1076b5110101 / 09ffff3014ffff0000ff
2024-05-28 14:40:03.889 [update notice] received update-write hmu SetMode QQ=10: 00 00 ff ff ff 07 00 00
2024-05-28 14:40:06.195 [update notice] received read hmu State07 QQ=71: 0;0.4;Eco mode HP off;ready
2024-05-28 14:40:07.330 [update notice] sent poll-read hmu RunDataCompressorOutletTemp QQ=31: 25.5
2024-05-28 14:40:08.339 [update notice] received unknown MS cmd: f115b52406020003011b00 / 0600031b000000

@paqpaqpaq
Copy link
Author

@LukasGrebe
I spent hours on getting this to work, but somehow, can't.
Where are the 'lost' parameters?

Scherm­afbeelding 2024-05-31 om 14 49 01

If I address it directly, like so:
2ad9b828-ebusd:/# ebusctl r -f CompressorSpeed
0.0

I do get a proper respons...

@paqpaqpaq
Copy link
Author

Scherm­afbeelding 2024-05-31 om 15 41 21 It also is found by MQTT Explorer so it does get broadcasted.

@piotrtobolski
Copy link

HA discovery is part of ebusd project, this addon has nothing to do. Since Alpine Linux can't use the latest version of ebusd, we need to wait, possibly many months for another ebusd release.

@universal
Copy link

without having spent much time looking into it: is it related to this? john30/ebusd#1245

so changing the mqtt-hassio.cfg might fix this?!

@LukasGrebe
Copy link
Owner

@LukasGrebe

I spent hours on getting this to work, but somehow, can't.

Where are the 'lost' parameters?

Do you mean command line parameters? You can use commandline_options - see #128 as an example.

Or are you looking for something different?

@LukasGrebe LukasGrebe self-assigned this Jul 1, 2024
@LukasGrebe LukasGrebe added the documentation Improvements or additions to documentation label Jul 1, 2024
@cociweb
Copy link
Collaborator

cociweb commented Sep 13, 2024 •
edited
Loading

according to @universal's answer, you can adjust your --mqttvar parameter as:
image
There was a Home Assistant update in the spring of 2024, and some classes did not match the old configuration. In my case, the pressure was misread/retained, resulting in invalid values for half a year until I discovered it.

...and the "pressure" is still not merged to the upstream 23.3 config....

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees

@LukasGrebe LukasGrebe

Labels
documentation Improvements or additions to documentation
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
5 participants
@universal @piotrtobolski @LukasGrebe @cociweb @paqpaqpaq