Alarm arm button

[Rowbotronics]

Need to re-add the button that arms the alarm system. Ideally this would be via a dedicated module connected to the alarmsystem that handles all arm/disarm requests for MCP.

Arming via Keyswitch

• all zones (doors and motions) are immediately armed.
• the last discussed plan was to have a button push in MCP have a delay of maybe a minute before arming via keyswitch. Some kind of countdown or warning is needed.
• MCP would wait up to 3 minutes, check system is armed and if not attempt arming again.
• MCP would wait another duration, check system and attempt another re-arm
• MCP would check a final time and send notification at arm failed.