Funky behavior with crystal and liquid

[eamondo2]

I've got an unconventional and overcomplicated setup, running latest revelation modpack.
Getting this bizarre text bug on the liquid and the crystals, seems to happen just after moving them into the top stage of my purifiers.

Using compact machines, fluid flows through with no effect, but after the buffer tank

I get this distortion

Which persists, and borks the rest of the machines. Tested a similar setup elsewhere and can't figure why.
I've got opencomputers switching the pumps on and off, cycling a tank's worth of liquid through and waiting until it is all approx 80% pure, then dumping and refilling.

This breaks it, it purifies, but doesn't get affected by lasers etc because the bugged data causes it to skip the cutoff.

Also, it reaches 106% purity somehow

which I feel shouldn't be possible.

[eamondo2]

I've got the fluid looping through the purifiers until it gets dumped to holding at the cutoff purity, theoretically it will all hit the required amount, and then dump, then the system should refill.

[eamondo2]

yeah, at 130% purity now. Not quite sure what's going on.

[goodboyrobot]

I have the same issue, it appears to be the valve which causes the issue:

The fluid is fine until it reaches the purity and other attributes required by the valve, at which point it drops into the lower tank and the Quality. purity and strength values change to the square question mark error icon.

Attempting to use the crystal in a reactor causes it to fail instantly, leaving you with a depleted crystal (which weirdly is still red).

Please fix this, the valve is worse than useless if it destroys the fluid you pump into it.

[goodboyrobot]

Forgot to add, I am on FTB Revelations 1.6.0 with Deep Resonance 1.12-1.6.0