GPUhack example run

On an interactive node (e.g. via voltash command) the binary executes normally, that is:

hpclogin2(username) $ voltash

... wait a bit for interactive node

nodename(username) $ ./BNL_H8.out -n1e8 lambda=2.36 -dmy_dir 
Instrument:     BNL_H8 on n-62-20-1.
Monochromator : DM = 3.3539
A1 = 20.60, A2 = 41.20 (deg)
Ki = 2.662 Angs-1 Energy = 14.69 meV
Velocity = 1676 m/s, lambda = 2.36 Angs
[BNL_H8] Initialize

Save [BNL_H8]
Detector: D0_Source_I=0.00316469 D0_Source_ERR=1.39388e-06 D0_Source_N=5.15476e+06 "D0_Source.psd"
Detector: D1_SC1_Out_I=0.0204115 D1_SC1_Out_ERR=3.53868e-06 D1_SC1_Out_N=3.3459e+07 "D1_SC1_Out.psd"
Detector: D2_A4_I=0.0137503 D2_A4_ERR=2.90472e-06 D2_A4_N=2.2573e+07 "D2_A4.psd"
Detector: D4_SC2_In_I=0.00154987 D4_SC2_In_ERR=9.75286e-07 D4_SC2_In_N=2.56212e+06 "D4_SC2_In.psd"
Detector: D5_SC2_Out_I=0.00121189 D5_SC2_Out_ERR=8.62348e-07 D5_SC2_Out_N=2.01959e+06 "D5_SC2_Out.psd"
Detector: D7_SC3_In_I=1.24521e-07 D7_SC3_In_ERR=2.24855e-10 D7_SC3_In_N=336749 "D7_SC3_In.psd"
Detector: D8_SC3_Out_I=2.38721e-08 D8_SC3_Out_ERR=9.90139e-11 D8_SC3_Out_N=63914 "D8_SC3_Out.psd"
Detector: D10_SC4_In_I=1.29521e-09 D10_SC4_In_ERR=2.31474e-11 D10_SC4_In_N=3443 "D10_SC4_In.psd"
Detector: He3H_I=1.0102e-09 He3H_ERR=2.04559e-11 He3H_N=2679 "He3.psd"

Finally [BNL_H8: my_dir]. Time: 431400 [h] 

Next topic: GPUhack measure wall clock