Newbie can't get camera to display

[Thorium9O]

Howdy,
I'm new to Motion and can't get my camera to display. I have gotten the RTSP feed to open in Vlc and with ffplay but when I try with Motion the web interface gives a gray screen. I'm using an Amcrest IP5M-T1179EW running 5.15.114-2-MANJARO. Below is the output from Motion.
Thanks in advance for the help,
Tuck

[0:motion] [NTC] [ALL] conf_load: Processing thread 0 - config file /etc/motion/motion.conf
[0:motion] [NTC] [ALL] motion_startup: Logging to syslog
[0:motion] [NTC] [ALL] motion_startup: Motion 4.5.1 Started
[0:motion] [NTC] [ALL] motion_startup: Using default log type (ALL)
[0:motion] [NTC] [ALL] motion_startup: Using log type (ALL) log level (NTC)
[0:motion] [NTC] [STR] webu_start_strm: Starting all camera streams on port 8081
[0:motion] [NTC] [STR] webu_start_strm: Unable to start stream for camera 0
[0:motion] [NTC] [STR] webu_start_ctrl: Starting webcontrol on port 8080
[0:motion] [NTC] [STR] webu_start_ctrl: Unable to start MHD
[0:motion] [NTC] [ENC] ffmpeg_global_init: ffmpeg libavcodec version 60.3.100 libavformat version 60.3.100
[0:motion] [NTC] [ALL] translate_init: Language: English
[0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 0 is from /etc/motion/motion.conf
[0:motion] [NTC] [ALL] motion_start_thread: Camera ID: 0 Camera Name: (null) Service: rtsp:
[0:motion] [NTC] [ALL] main: Waiting for threads to finish, pid: 7627
[1:ml1] [NTC] [ALL] motion_init: Camera 0 started: motion detection Enabled
[1:ml1] [NTC] [VID] vid_start: Opening Netcam RTSP
[1:ml1] [NTC] [NET] motion_init: Substream not available. Image sizes not modulo 16.
[1:ml1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 1 items
[2:nc2] [NTC] [NET] netcam_rtsp_handler: norm: Camera handler thread [2] started
[2:nc2] [NTC] [NET] netcam_rtsp_connect: norm: Camera ((null)) connected
[1:ml1] [NTC] [ALL] image_ring_resize: Resizing pre_capture buffer to 4 items
^C[1:ml1] [NTC] [ALL] motion_loop: Thread exiting
[1:ml1] [NTC] [NET] netcam_rtsp_cleanup: Normal resolution: Shut down complete.
[0:motion] [NTC] [ALL] main: Threads finished
[0:motion] [NTC] [ALL] main: Motion terminating