Add Custom TMC setup for Australia and New Zealand #69
Replies: 7 comments 20 replies
-
I also look forward to integrating TMC cracking into the new version of MIB. After audi connect expires, VC can no longer display traffic conditions. Currently I see someone on the Russian forum has achieved it. |
Beta Was this translation helpful? Give feedback.
-
If you can bring the input and help with testing. |
Beta Was this translation helpful? Give feedback.
-
When I find some time in the next few weeks I write up a proper script and a menu for it (now that I sunk some time into understanding the menus last week) AUS/NZ is easy as I have that data, and I could probably find the Russian info as that is where I started with this and have the original configs somewhere. It does rely on two things, one that the encryption keys exist in the encryption tables already (via maps or base firmware) it's not always the case and in AUS/NZ the keys were removed from the discover media maps in late 2010s, though still works fine with MIB Discover pro units etc, and then a little bit of info on which stations actually broadcast the tmc data (not hard to find with a sdr radio or similar) Station Id, country id etc The last thing is just trying the "7" different encryption index values until you find what works. |
Beta Was this translation helpful? Give feedback.
-
guys, thx a lot for your hard work. |
Beta Was this translation helpful? Give feedback.
-
I am in AUS and changed 1024 to 33792, it enables the Traffic overlay menu in Navigation but there is no traffic information available. |
Beta Was this translation helpful? Give feedback.
-
Hi,there |
Beta Was this translation helpful? Give feedback.
-
Ran across this and makes me want to play with the HDradio option again. I am in NA in a place where Kia as an example gets free traffic via HDradio. I see that code as an option and have tried that on my b9 without any luck. Must be missing something beyond 1538. |
Beta Was this translation helpful? Give feedback.
-
https://github.com/catatonicChimp/mib2-tmc-ANZ/tree/main/MIB2HIGH(MHI2)
I've created a patch to enable HereTraffic TMC-RDS based on a patch made some people on Drive.ru. It is a set of custom paytmc.json and paytmc_aus.json files with custom entries for HereTraffic in Australia and NZ and an update to /mnt/app/navigation/resources/app/vw/*/version-cfg.txt so the nav unit points to the custom version rather then what was installed via the map update.
It would be great to add a menu option in M.I.B. to install them.
the install script probably needs some clean up and currently its only tested with my VW Golf, but have tested it works in Both NZ and NSW (Australia)
Cheers
Beta Was this translation helpful? Give feedback.
All reactions