MSL1000
This is the basic lab needed for all the OSMS-Experiments. The base version contains only basic lab equipment, but it can be upgraded with additional experiment equipment rack broth to the station in equipment rack containers. All OSMS-Experiments need additional equipment or a MEP-825.
####Stats: Production: 1 MSL_LabTime per hour
Using: 5 electrical charge per hour when running
Crew capacity: 2
Minimal crew: 1
Needed tech: Space Exploration
Enty Cost: 6000
Cost: 2000
Mass: 4
Additional lab equipment is transported in containers, when a container is docked to a station with a MSL-1000 the equipment in the container can be installed in the lab. Right click on the lab an install the equipment. Installing equipment will add some mass to the lab an reduce the mass of the container. Installed can produce additional research resources needed by experiments.
The CIR is needed to safely run combustion experiments in the lab. In real life the CIR was launched to the ISS in November 2008 by the Space Shuttle (STS-126). NASA Page
####Stats: Production: 1 CIRBurnTime per hour
Using: 60 electrical charge per hour when running
Needed tech: Space Exploration
Enty Cost: 3500
Cost: 1500
Mass: 3 / 3.2 (with container)
The FFR is needed to run fluids experiments in the lab. In real life the Fluid Integrated Rack (FIR) was launched to the International Space Station (ISS) in August 2009 by the Space Shuttle (STS-128). NASA Page
####Stats: Production: 0.6 FFRTestRun per hour
Using: 30 electrical charge per hour when running
Needed tech: Fuel Systems
Enty Cost: 3500
Cost: 1500
Mass: 3 / 3.2 (with container)
The 3PR is needed to run 3d printer experiments in the lab. In real life a 3D printer made by MADEINSPACE was launched to the International Space Station (ISS) in September 2014 by the SpaceX (CRS-4). NASA Page
####Stats: Production: 10 3D_PrintLayer per hour
Using: 5 electrical charge per hour when running
Needed tech: Specialized Construction
Enty Cost: 2000
Cost: 1000
Mass: 2.7 / 2.9 (with container)
