Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Disable equipment size counts for zone HVAC equipment #240

Open
mdahlhausen opened this issue Oct 22, 2024 · 1 comment
Open

Disable equipment size counts for zone HVAC equipment #240

mdahlhausen opened this issue Oct 22, 2024 · 1 comment
Labels
postprocessing PR improves or adds postprocessing content reporting measure PR improves or adds reporting measures

Comments

@mdahlhausen
Copy link
Contributor

With zone multipliers, zone HVAC equipment capacities are equal to design load times the zone multiplier. So a zone multiplier of 10 will overstate capacity by 10x. This only influences zone HVAC equipment.

We should remove equipment size counts for zone HVAC equipment until we account for this in our models and reporting.

@mdahlhausen mdahlhausen added reporting measure PR improves or adds reporting measures postprocessing PR improves or adds postprocessing content labels Oct 23, 2024
@asparke2
Copy link
Member

These are the columns to disable:

out.params.vrf_indoor_unit_count
out.params.vrf_outdoor_unit_count
out.params.hvac_count_dx_cooling_0_to_30_kbtuh
out.params.hvac_count_dx_cooling_135_to_240_kbtuh
out.params.hvac_count_dx_cooling_240_to_760_kbtuh
out.params.hvac_count_dx_cooling_30_to_65_kbtuh
out.params.hvac_count_dx_cooling_65_to_135_kbtuh
out.params.hvac_count_dx_cooling_760_plus_kbtuh
out.params.hvac_count_dx_heating_0_to_30_kbtuh
out.params.hvac_count_dx_heating_135_to_240_kbtuh
out.params.hvac_count_dx_heating_240_plus_kbtuh
out.params.hvac_count_dx_heating_30_to_65_kbtuh
out.params.hvac_count_dx_heating_65_to_135_kbtuh
out.params.hvac_count_primary_gas_coil_0_to_30_kbtuh
out.params.hvac_count_primary_gas_coil_135_to_240_kbtuh
out.params.hvac_count_primary_gas_coil_240_plus_kbtuh
out.params.hvac_count_primary_gas_coil_30_to_65_kbtuh
out.params.hvac_count_primary_gas_coil_65_to_135_kbtuh
out.params.hvac_count_supplemental_gas_coil_0_to_30_kbtuh
out.params.hvac_count_supplemental_gas_coil_135_to_240_kbtuh
out.params.hvac_count_supplemental_gas_coil_240_plus_kbtuh
out.params.hvac_count_supplemental_gas_coil_30_to_65_kbtuh
out.params.hvac_count_supplemental_gas_coil_65_to_135_kbtuh
out.params.hvac_count_heat_pumps_cooling
out.params.hvac_count_heat_pumps_heating
out.params.hvac_count_heat_pumps_heating_0_to_300_kbtuh
out.params.hvac_count_heat_pumps_heating_2500_plus_kbtuh
out.params.hvac_count_heat_pumps_heating_300_to_2500_kbtuh

asparke2 added a commit that referenced this issue Dec 17, 2024
Disables reporting of HVAC system counts which were incorrect because of the introduction of zone multipliers. These may be re-enabled after correct handling of zone multipliers in the reporting system.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
postprocessing PR improves or adds postprocessing content reporting measure PR improves or adds reporting measures
Projects
None yet
Development

No branches or pull requests

2 participants