From fe41933c2ec7d397cc0b3e20b59641157246acd1 Mon Sep 17 00:00:00 2001 From: jans23 Date: Mon, 9 Dec 2024 10:07:42 +0100 Subject: [PATCH] typos --- source/components/nitropad/troubleshooting.rst.inc | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/source/components/nitropad/troubleshooting.rst.inc b/source/components/nitropad/troubleshooting.rst.inc index d11f36d9b8..5d7649c120 100644 --- a/source/components/nitropad/troubleshooting.rst.inc +++ b/source/components/nitropad/troubleshooting.rst.inc @@ -12,7 +12,6 @@ Here you will find a collection of common issues. - Starting in recovery shell -------------------------- @@ -44,7 +43,7 @@ steps: NitroPad doesn’t start ---------------------- -If the Laptop does not start and only flashes briefly when switched on, please try the following +If the laptop does not start and only flashes briefly when switched on, please try the following steps: 1. Try a hard reboot: @@ -59,11 +58,11 @@ steps: Invalid Code ------------ -Each boot the code is generated on the Nitropad and the Nitrokey, if its +Each boot the code is generated on the NitroPad and the Nitrokey, if its connected. It is allowed to run 10 boots without loosing the synchronization between the devices, after which the bad code signal is shown, regardless of the rest of the system being in a correct state. If -you are sure the system was not beign tampered with (e.g. the Nitropad +you are sure the system was not beign tampered with (e.g. the NitroPad was booted more than 10 times without the Nitrokey), you can safely reset the system’s warning.