Getting X failed to open display, while testing GPU on the work-in-progress branch for the JetPack 6 Developer Preview #112
Replies: 3 comments 1 reply
-
|
I tried all the Please avoid to run those application on the serial UART or ssh session. |
Beta Was this translation helpful? Give feedback.
-
|
BTW, could you please explain the origin of this application |
Beta Was this translation helpful? Give feedback.
-
|
/usr/bin/glmark2-es |
Beta Was this translation helpful? Give feedback.
-
|
root@nvidia-jetson-agx-orin-devkit:/# /usr/bin/glmark2-es2 File names seems to different from my project directory....Tried executing them, failing to start due to above error. |
Beta Was this translation helpful? Give feedback.
-
root@nvidia-jetson-agx-orin-devkit:/# /usr/bin/glmark2-es
-sh: /usr/bin/glmark2-es: No such file or directory
root@nvidia-jetson-agx-orin-devkit:/# /usr/bin/l4t-graphics-demos/x11/bubble
X failed to open display.
Usage: bubble [options]
Frequency with which to automatically poke bubble:
[-autopoke ]
Turn on framerate logging:
[-fps]
To run in Fixed-Frame Increment mode (Fixed increment of frames):
[-ff]
Delta used in Fixed-Frame Increment which defines amount of change in scene:
[-delta ]
Window system options (not all available on all platforms):
[-windowsize] [ ] (window size)
[-windowoffset ] (window position)
Not supported on Wayland
Rendering options (availability varies by platform):
[-buffering ] (n-buffered swaps)
(Max 4)
[-msaa ] (multi sampling)
[-csaa ] (coverage sampling)
[-vcaa ] (coverage sampling)
[-useprogbin ] (program binary loading)
[-smart ] (detect termination in
cross-partition stream)
[-eglstreamsocket ] (socket to get EGLStream from)
[-fifo ] (0 min, 5 max)
[-renderahead ] (-1 min, 10 max)
(Max number of in-flight GPU
frames in mailbox mode to
throttle mailbox mode.)
[-latency ] (0 min, 2147483647 max)
[-timeout ] (0 min, 2147483647 max)
[-frames <#>] (max numnber of frames to run)
[-ip ] (IP address)
[-port ] (port number for multiple consumers)
[-proctype ] (Producer or Consumer)
[-surfaceid ] (0 min, 9999 max)
[-sec ] (0 forever, 3153600 max)
[-inactivity ] (time to render on/off)
Note:
Use of parameters which modify the display configuration
is primarily intended for use when running the application
in a standalone fashion. When there is a separate display
server running, their use is discouraged, as they will blindly
change the state without regard to any other applications
sharing the display.
root@nvidia-jetson-agx-orin-devkit:/# /usr/bin/l4t-graphics-demos/x11/ctree
X failed to open display.
Usage: ctree [options]
Put into demo mode:
[-demo]
Use low resolution textures:
[-smalltex]
Disable the menu interface:
[-nomenu]
Disable rendering of the sky:
[-nosky]
Turn on framerate logging:
[-fps]
Window system options (not all available on all platforms):
[-windowsize] [ ] (window size)
[-windowoffset ] (window position)
Not supported on Wayland
Rendering options (availability varies by platform):
[-buffering ] (n-buffered swaps)
(Max 4)
[-msaa ] (multi sampling)
[-csaa ] (coverage sampling)
[-vcaa ] (coverage sampling)
[-useprogbin ] (program binary loading)
[-smart ] (detect termination in
cross-partition stream)
[-eglstreamsocket ] (socket to get EGLStream from)
[-fifo ] (0 min, 5 max)
[-renderahead ] (-1 min, 10 max)
(Max number of in-flight GPU
frames in mailbox mode to
throttle mailbox mode.)
[-latency ] (0 min, 2147483647 max)
[-timeout ] (0 min, 2147483647 max)
[-frames <#>] (max numnber of frames to run)
[-ip ] (IP address)
[-port ] (port number for multiple consumers)
[-proctype ] (Producer or Consumer)
[-surfaceid ] (0 min, 9999 max)
[-sec ] (0 forever, 3153600 max)
[-inactivity ] (time to render on/off)
Note:
Use of parameters which modify the display configuration
is primarily intended for use when running the application
in a standalone fashion. When there is a separate display
server running, their use is discouraged, as they will blindly
change the state without regard to any other applications
sharing the display.
root@nvidia-jetson-agx-orin-devkit:/# /usr/bin/l4t-graphics-demos/x11/eglstreamcube
X failed to open display.
Usage: eglstreamcube [options] [command] [command options]
Listen on :
[-socket ]
Window system options (not all available on all platforms):
[-windowsize] [ ] (window size)
[-windowoffset ] (window position)
Not supported on Wayland
Rendering options (availability varies by platform):
[-buffering ] (n-buffered swaps)
(Max 4)
[-msaa ] (multi sampling)
[-csaa ] (coverage sampling)
[-vcaa ] (coverage sampling)
[-useprogbin ] (program binary loading)
[-smart ] (detect termination in
cross-partition stream)
[-eglstreamsocket ] (socket to get EGLStream from)
[-fifo ] (0 min, 5 max)
[-renderahead ] (-1 min, 10 max)
(Max number of in-flight GPU
frames in mailbox mode to
throttle mailbox mode.)
[-latency ] (0 min, 2147483647 max)
[-timeout ] (0 min, 2147483647 max)
[-frames <#>] (max numnber of frames to run)
[-ip ] (IP address)
[-port ] (port number for multiple consumers)
[-proctype ] (Producer or Consumer)
[-surfaceid ] (0 min, 9999 max)
[-sec ] (0 forever, 3153600 max)
[-inactivity ] (time to render on/off)
Note:
Use of parameters which modify the display configuration
is primarily intended for use when running the application
in a standalone fashion. When there is a separate display
server running, their use is discouraged, as they will blindly
change the state without regard to any other applications
sharing the display.
root@nvidia-jetson-agx-orin-devkit:/# /usr/bin/l4t-graphics-demos/x11/gears
X failed to open display.
Usage: gears [options] [runtime]
(negative runtime means "forever")
Clear color option:
[-clearColor ] (background color)
Window system options (not all available on all platforms):
[-windowsize] [ ] (window size)
[-windowoffset ] (window position)
Not supported on Wayland
Rendering options (availability varies by platform):
[-buffering ] (n-buffered swaps)
(Max 4)
[-msaa ] (multi sampling)
[-csaa ] (coverage sampling)
[-vcaa ] (coverage sampling)
[-useprogbin ] (program binary loading)
[-smart ] (detect termination in
cross-partition stream)
[-eglstreamsocket ] (socket to get EGLStream from)
[-fifo ] (0 min, 5 max)
[-renderahead ] (-1 min, 10 max)
(Max number of in-flight GPU
frames in mailbox mode to
throttle mailbox mode.)
[-latency ] (0 min, 2147483647 max)
[-timeout ] (0 min, 2147483647 max)
[-frames <#>] (max numnber of frames to run)
[-ip ] (IP address)
[-port ] (port number for multiple consumers)
[-proctype ] (Producer or Consumer)
[-surfaceid ] (0 min, 9999 max)
[-sec ] (0 forever, 3153600 max)
[-inactivity ] (time to render on/off)
Note:
Use of parameters which modify the display configuration
is primarily intended for use when running the application
in a standalone fashion. When there is a separate display
server running, their use is discouraged, as they will blindly
change the state without regard to any other applications
sharing the display.
root@nvidia-jetson-agx-orin-devkit:/# /usr/bin/l4t-graphics-demos/x11/gearscube
X failed to open display.
Usage: gearscube [options]
(negative runTime means "forever")
Method to use for render-to-texture:
[-method { fbo pixmap pbuffercopy }
Texture size:
[-texsize ]
Window system options (not all available on all platforms):
[-windowsize] [ ] (window size)
[-windowoffset ] (window position)
Not supported on Wayland
Rendering options (availability varies by platform):
[-buffering ] (n-buffered swaps)
(Max 4)
[-msaa ] (multi sampling)
[-csaa ] (coverage sampling)
[-vcaa ] (coverage sampling)
[-useprogbin ] (program binary loading)
[-smart ] (detect termination in
cross-partition stream)
[-eglstreamsocket ] (socket to get EGLStream from)
[-fifo ] (0 min, 5 max)
[-renderahead ] (-1 min, 10 max)
(Max number of in-flight GPU
frames in mailbox mode to
throttle mailbox mode.)
[-latency ] (0 min, 2147483647 max)
[-timeout ] (0 min, 2147483647 max)
[-frames <#>] (max numnber of frames to run)
[-ip ] (IP address)
[-port ] (port number for multiple consumers)
[-proctype ] (Producer or Consumer)
[-surfaceid ] (0 min, 9999 max)
[-sec ] (0 forever, 3153600 max)
[-inactivity ] (time to render on/off)
Note:
Use of parameters which modify the display configuration
is primarily intended for use when running the application
in a standalone fashion. When there is a separate display
server running, their use is discouraged, as they will blindly
change the state without regard to any other applications
sharing the display.
Beta Was this translation helpful? Give feedback.
All reactions