Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Viewer not responding #1180

Open
carlo-p-tech opened this issue Apr 29, 2023 · 0 comments
Open

Viewer not responding #1180

carlo-p-tech opened this issue Apr 29, 2023 · 0 comments

Comments

@carlo-p-tech
Copy link

carlo-p-tech commented Apr 29, 2023

When I run ./bin/Protonect it outputs the following

Version: 0.2.0
Environment variables: LOGFILE=<protonect.log>
Usage: ./bin/Protonect [-gpu=<id>] [gl | cl | clkde | cuda | cudakde | cpu] [<device serial>]
        [-noviewer] [-norgb | -nodepth] [-help] [-version]
        [-frames <number of frames to process>]
To pause and unpause: pkill -USR1 Protonect
[Info] [Freenect2Impl] enumerating devices...
[Info] [Freenect2Impl] 11 usb devices connected
[Info] [Freenect2Impl] found valid Kinect v2 @2:6 with serial 015076245347
[Info] [Freenect2Impl] found 1 devices
[Info] [Freenect2DeviceImpl] opening...
[Info] [Freenect2DeviceImpl] transfer pool sizes rgb: 20*16384 ir: 60*8*33792
[Info] [Freenect2DeviceImpl] opened
[Info] [Freenect2DeviceImpl] starting...
[Debug] [Freenect2DeviceImpl] status 0x090000: 9729
[Debug] [Freenect2DeviceImpl] status 0x090000: 9731
[Info] [Freenect2DeviceImpl] submitting rgb transfers...
[Info] [Freenect2DeviceImpl] submitting depth transfers...
[Info] [Freenect2DeviceImpl] started
device serial: 015076245347
device firmware: 4.0.3917.0
[Info] [TurboJpegRgbPacketProcessor] avg. time: 14.6731ms -> ~68.1519Hz
[Info] [TurboJpegRgbPacketProcessor] avg. time: 14.8602ms -> ~67.2938Hz
[Info] [TurboJpegRgbPacketProcessor] avg. time: 16.836ms -> ~59.3964Hz
[Info] [TurboJpegRgbPacketProcessor] avg. time: 16.2895ms -> ~61.3892Hz
[Info] [TurboJpegRgbPacketProcessor] avg. time: 17.2111ms -> ~58.1022Hz

However, the viewer goes to not responding.
In the dmesg output I get the following:

[ 2572.806845] xhci_hcd 0000:01:00.0: Looking for event-dma 00000000c0638760 trb-start 00000000c8142000 trb-end 0000000000000000 seg-start 00000000c8142000 seg-end 00000000c8142ff0
[ 2572.806845] xhci_hcd 0000:01:00.0: Looking for event-dma 00000000c0638760 trb-start 00000000cd50f000 trb-end 0000000000000000 seg-start 00000000cd50f000 seg-end 00000000cd50fff0
[ 2572.806845] xhci_hcd 0000:01:00.0: Looking for event-dma 00000000c0638760 trb-start 00000000c88e1000 trb-end 0000000000000000 seg-start 00000000c88e1000 seg-end 00000000c88e1ff0
[ 2572.806845] xhci_hcd 0000:01:00.0: ERROR Transfer event TRB DMA ptr not part of current TD ep_index 8 comp_code 13
[ 2572.806845] xhci_hcd 0000:01:00.0: Looking for event-dma 00000000c0638770 trb-start 00000000b7d3d000 trb-end 0000000000000000 seg-start 00000000b7d3d000 seg-end 00000000b7d3dff0
[ 2572.806845] xhci_hcd 0000:01:00.0: Looking for event-dma 00000000c0638770 trb-start 00000000bcf92000 trb-end 0000000000000000 seg-start 00000000bcf92000 seg-end 00000000bcf92ff0
[ 2572.806845] xhci_hcd 0000:01:00.0: Looking for event-dma 00000000c0638770 trb-start 00000000c89d4000 trb-end 0000000000000000 seg-start 00000000c89d4000 seg-end 00000000c89d4ff0
[ 2572.806845] xhci_hcd 0000:01:00.0: Looking for event-dma 00000000c0638770 trb-start 00000000c8baf000 trb-end 0000000000000000 seg-start 00000000c8baf000 seg-end 00000000c8bafff0
[ 2572.806845] xhci_hcd 0000:01:00.0: Looking for event-dma 00000000c0638770 trb-start 00000000bd768000 trb-end 0000000000000000 seg-start 00000000bd768000 seg-end 00000000bd768ff0
[ 2572.806845] xhci_hcd 0000:01:00.0: Looking for event-dma 00000000c0638770 trb-start 00000000cfaba000 trb-end 0000000000000000 seg-start 00000000cfaba000 seg-end 00000000cfabaff0
[ 2572.806845] xhci_hcd 0000:01:00.0: Looking for event-dma 00000000c0638770 trb-start 00000000b7c60000 trb-end 0000000000000000 seg-start 00000000b7c60000 seg-end 00000000b7c60ff0
[ 2572.806845] xhci_hcd 0000:01:00.0: Looking for event-dma 00000000c0

Here is the output of lsusb -t. The kinect is on Bus 02.

carlo@Carlo-Desktop:~/libfreenect2$ lsusb -t
/:  Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
/:  Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
/:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 10000M
/:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
    |__ Port 2: Dev 2, If 0, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 2: Dev 2, If 1, Class=Human Interface Device, Driver=usbhid, 12M
/:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 10000M
    |__ Port 3: Dev 6, If 0, Class=Vendor Specific Class, Driver=usbfs, 5000M
    |__ Port 3: Dev 6, If 1, Class=Vendor Specific Class, Driver=usbfs, 5000M
    |__ Port 3: Dev 6, If 2, Class=Audio, Driver=snd-usb-audio, 5000M
    |__ Port 3: Dev 6, If 3, Class=Audio, Driver=snd-usb-audio, 5000M
/:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/10p, 480M
    |__ Port 5: Dev 5, If 1, Class=Wireless, Driver=btusb, 12M
    |__ Port 5: Dev 5, If 0, Class=Wireless, Driver=btusb, 12M
    |__ Port 6: Dev 3, If 2, Class=Human Interface Device, Driver=usbhid, 12M
    |__ Port 6: Dev 3, If 0, Class=Vendor Specific Class, Driver=, 12M
    |__ Port 7: Dev 4, If 0, Class=Hub, Driver=hub/4p, 480M

I am running:
DISTRIB_DESCRIPTION="Ubuntu 22.04.2 LTS"

I have an AMD and no graphics card. Running AMD 5700G (using APU)

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

1 participant