numaker-hmi-m2354

NuMaker-HMI-M2354

Major Folder	Description
GCC	GCC project file
KEIL	MDK5 project file
IAR	IAR project file

KEIL project

User can select listed Target Name to build target execution using uVision MDK5.

Target	Description
M2354KJ_320x240	Use ILI9431 SPI LCD panel with resistive touch screen(S/W ADC Sampling)

GCC project

To build target execution using Eclipse-base IDE(NuEclipse V1.02.023r).

Target	Description
M2354KJ_320x240	Use ILI9431 SPI LCD panel with resistive touch screen(S/W ADC Sampling)

IAR project

To build target execution using IAR IDE(IAR 9.40).

Target	Description
Release	Use ILI9431 SPI LCD panel with resistive touch screen(S/W ADC Sampling)

Compiling options

• The porting given CONFIG_DISP_LINE_BUFFER_NUMBER to (LV_VER_RES_MAX/4) by default. If you need save the memory size, you can re-define it.

  #define CONFIG_DISP_LINE_BUFFER_NUMBER   (LV_VER_RES_MAX/4)

• The partial update approach is applied in this port.

Notice

• Initial fatfs and access SPI-NOR flash device on NuTFT board.
  • Due to PA0, PA1, PA2, PA3 pins(SPI0) is in 1.8v power-domain by default. You should switch to 3.3v domain to access the W25X16 SPI NOR flash of Nu-TFT board.
  • Remove R15 resistor and connect VDDIO pin to 3.3v.

Purchase

Nuvoton Direct

Resources