diff --git a/config/images/namron/4512744.png b/config/images/namron/4512744.png
new file mode 100644
index 0000000000..6470632bc2
Binary files /dev/null and b/config/images/namron/4512744.png differ
diff --git a/config/manufacturer_specific.xml b/config/manufacturer_specific.xml
index b9b63af1aa..a3d3465760 100644
--- a/config/manufacturer_specific.xml
+++ b/config/manufacturer_specific.xml
@@ -1317,6 +1317,7 @@
     <Product config="namron/4512724.xml" id="d00c" type="0200" name="Z-Wave Dimmer 2 400W"/>
     <Product config="namron/4512720.xml" id="a306" type="0300" name="Z-wave 2 Kanaler Bryter" />
     <Product config="namron/4512714.xml" id="a305" type="0300" name="Z-wave 4 Channel Remote" />
+    <Product config="namron/4512744.xml" id="d013" type="0200" name="Touch Z-Wave 16A Thermostat" />
   </Manufacturer>
   <Manufacturer id="016E" name="Nanjing Easthouse Electrical Co"></Manufacturer>
   <Manufacturer id="0121" name="Napco Security Technologies, Inc.">
diff --git a/config/namron/4512744.xml b/config/namron/4512744.xml
new file mode 100644
index 0000000000..bce69314b2
--- /dev/null
+++ b/config/namron/4512744.xml
@@ -0,0 +1,204 @@
+<Product Revision="2" xmlns="https://github.com/OpenZWave/open-zwave">
+  <!-- Please refer to https://github.com/OpenZWave/open-zwave/wiki/Adding-Devices for instructions -->
+  <MetaData>
+    <MetaDataItem name="Name">Touch Z-Wave 16 Thermostat</MetaDataItem>
+    <MetaDataItem name="Description">Floor heating thermostat</MetaDataItem>
+    <MetaDataItem name="OzwInfoPage">http://www.openzwave.com/device-database/0438:d013:0200</MetaDataItem>
+    <MetaDataItem name="ProductPage">https://www.namron.com/products/namron-z-wave-touch-termostat-16a-hvit/</MetaDataItem>
+    <MetaDataItem name="ProductSupport">https://www.namron.com/contact/</MetaDataItem>
+    <MetaDataItem name="ProductPic">images/namron/4512744.png</MetaDataItem>
+    <MetaDataItem name="ProductManual">https://www.elektroimportoren.no/docs/lib/4512744-Brukerveiledning-5.pdf</MetaDataItem>
+    <MetaDataItem name="WakeupDescription">Touch any button</MetaDataItem>
+    <MetaDataItem name="InclusionDescription">Enter off mode and press up and down arrow for 5 seconds to enter settings menu. Select ZWAVE INFO and press F. Select Add and press F</MetaDataItem>
+    <MetaDataItem name="ExclusionDescription">Enter off mode and press up and down arrow for 5 seconds to enter settings menu. Select ZWAVE INFO and press F. Select Remove and press F</MetaDataItem>
+    <MetaDataItem name="ResetDescription">Enter off mode and press up and down arrow for 3 seconds to enter config menu. Select ZWAVE INFO and press F. Select Reset and press F</MetaDataItem>
+    <MetaDataItem id="d013" name="ZWProductPage" type="0200"><!-- url to https://products.z-wavealliance.org/products/XXXX/ page for this specific version of the device --></MetaDataItem>
+    <MetaDataItem id="d013" name="FrequencyName" type="0200">CEPT</MetaDataItem>
+    <MetaDataItem id="d013" name="Identifier" type="200">4512744</MetaDataItem>
+    <ChangeLog>
+      <Entry author="Jørn Moe" date="11 Jan 2022" revision="2">Added support Thermostat Mode and Thermostat Set points command classes</Entry>
+      <Entry author="Jørn Moe" date="09 Jan 2022" revision="1">Initial release</Entry>
+    </ChangeLog>
+  </MetaData>
+
+  <!-- Thermostat Mode Command Class -->
+  <CommandClass id="64">
+    <Instance index="1"/>
+    <Value genre="user" index="0" instance="1" label="Mode" max="0" min="0" read_only="false" size="1" type="list" units="" value="0" write_only="false">
+      <Item label="Manual Off" value="0"/>
+      <Item label="Comfort" value="1"/>
+      <Item label="Dry floor" value="8"/>
+      <Item label="Energy Saving" value="11"/>
+      <Item label="Vacation" value="13"/>
+    </Value>
+    <SupportedModes>
+      <Mode index="0" label="OFF"/>
+      <Mode index="1" label="HEAT"/>
+      <Mode index="8" label="DRY"/>
+      <Mode index="11" label="ENERGY HEAT"/>
+      <Mode index="13" label="AWAY"/>
+    </SupportedModes>
+    <Compatibility/>
+  </CommandClass>
+  <!-- Thermostat Set points -->
+  <CommandClass id="67">
+    <Instance index="1"/>
+    <Value genre="user" index="1" instance="1" label="Heating"              max="0" min="0" read_only="false" type="decimal" units="C" value="25" write_only="false"/>
+    <Value genre="user" index="8" instance="1" label="Dry Air"              max="0" min="0" read_only="false" type="decimal" units="C" value="30" write_only="false"/>
+    <Value genre="user" index="11" instance="1" label="Energy Save Heating" max="0" min="0" read_only="false" type="decimal" units="C" value="20" write_only="false"/>
+    <Value genre="user" index="13" instance="1" label="Away Heating"        max="0" min="0" read_only="false" type="decimal" units="C" value="15" write_only="false"/>
+    <Compatibility>
+      <Base>0</Base>
+      <CreateVars>true</CreateVars>
+    </Compatibility>
+  </CommandClass>
+
+  <!-- Configuration Command Class - All Configuration Parameters should be entered into the section below -->
+  <CommandClass id="112">
+    <Value genre="config" index="2" label="Over current detection limit " size="1" type="byte" min="5" max="16" value="16">
+      <Help>5 - 16 (5A-16A)</Help>
+    </Value>
+    <Value genre="config" index="3" label="Buzer level " max="2" min="0" size="1" type="list" value="1">
+      <Help>Buzzer level.</Help>
+      <Item label="Off" value="0"/>
+      <Item label="Low" value="1"/>
+      <Item label="High" value="2"/>
+    </Value>
+    <Value genre="config" index="4" label="Power recovery behaviour " max="1" min="0" size="1" type="list" value="1">
+      <Help>What to do after power is restored.</Help>
+      <Item label="Use default settings" value="0"/>
+      <Item label="Recover to settings before power failure" value="1"/>
+    </Value>
+    <Value genre="config" index="6" label="High temperature detection " size="1" type="byte" min="0" max="60" value="60">
+      <Help>
+	20 - 60C
+	If room or floor sensor exeeds this value, relay will turn off heating and send notification message.
+      </Help>
+    </Value>
+    <Value genre="config" index="7" label="Temperature hysteresis " size="1" type="byte" min="5" max="20" value="5">
+      <Help>
+	5 - 20. Temperature control hysteresis value
+	Unit is 0.1C (0.5C - 2C).
+      </Help>
+    </Value>
+    <Value genre="config" index="8" label="Auto mode " max="2" min="0" size="1" type="list" value="1">
+      <Help>Select energy save mode temperature schedule.</Help>
+      <Item label="Use schedule set by user" value="0"/>
+      <Item label="Use Energy_Save_Heating temperature set by THERMOSTAT_SETPOINT_SET" value="1"/>
+    </Value>
+    <Value genre="config" index="9" label="Floor sensor type " max="5" min="1" size="1" type="list" value="1">
+      <Help>Select floor sensor type.</Help>
+      <Item label="NTC/10K B(25/50C)=3950 (default)" value="1"/>
+      <Item label="NTC/15K B(25/50C)=3950" value="2"/>
+      <Item label="NTC/50K B(25/50C)=3950" value="3"/>
+      <Item label="NTC/100K B(25/50C)=3950" value="4"/>
+      <Item label="NTC/12K B(25/50C)=3950" value="5"/>
+    </Value>
+    <Value genre="config" index="10" label="Temperature control reference " max="3" min="1" size="1" type="list" value="1">
+      <Help>Select Temperature control reference.</Help>
+      <Item label="room sensor" value="1"/>
+      <Item label="floor sensor" value="2"/>
+      <Item label="room+floor sensor" value="3"/>
+    </Value>
+
+    <Value genre="config" index="11" label="Room sensor temperature compensation " size="1" type="byte" min="-10" max="10" value="0">
+      <Help>
+	-10 to +10 - Temperature compensation. Unit is 0.5C (-5C to +5C)
+	Note that this value is stored using byte type so 255 == -1, 254 == -2 and so forth
+	When setting the value you may use negative values, but fetching actual from the node will show 255 for -1.
+      </Help>
+    </Value>
+    <Value genre="config" index="12" label="Floor sensor temperature compensation " size="1" type="byte" min="-10" max="10" value="0">
+      <Help>
+	-10 to +10 - Temperature compensation. Unit is 0.5C (-5C to +5C)
+	Note that this value is stored using byte type so 255 == -1, 254 == -2 and so forth
+	When setting the value you may use negative values, but fetching actual from the node will show 255 for -1.
+      </Help>
+    </Value>
+
+    <Value genre="config" index="13" label="Drying mode duration " size="1" type="byte" min="5" max="100" value="5">
+      <Help>
+	Drying mode: temporary set high tempereture to dry the floor
+	Typically used in bathrooms if floor has gotten wet after showering
+	Set a value in minutes between 5 to 100.
+      </Help>
+    </Value>
+    <Value genre="config" index="14" label="Mode after drying mode ends " max="3" min="0" size="1" type="list" value="2">
+      <Help>Select mode to enter after drying mode ends.</Help>
+      <Item label="Off" value="0"/>
+      <Item label="Manual mode (comfort mode)" value="1"/>
+      <Item label="Auto mode (energy save mode)" value="2"/>
+      <Item label="Away mode" value="3"/>
+    </Value>
+    <Value genre="config" index="16" label="When to report temperature relative change " size="1" type="byte" min="0" max="10" value="2">
+      <Help>
+	0=disable, 2-10 
+	Unit is 0.1C (0.2C - 1C).
+      </Help>
+    </Value>
+    <Value genre="config" index="17" label="Time interval unit for periodic report of temperature and humidity " size="2" type="short" min="0" max="28800" value="300">
+      <Help>0=disable, 30-28800 seconds.</Help>
+    </Value>
+    <Value genre="config" index="18" label="When to report power change absolute threshold " size="1" type="byte" min="0" max="100" value="5">
+      <Help>
+	0=disable, 1-100
+	Unit is 1W (1-100W).
+      </Help>
+    </Value>
+    <Value genre="config" index="19" label="When to report current change absolute threshold " size="1" type="byte" min="0" max="10" value="10">
+      <Help>
+	0=disable, 1-10
+	Unit is 0.1A (0.1 - 1.0A).
+      </Help>
+    </Value>
+    <Value genre="config" index="20" label="When to report voltage change absolute threshold " size="1" type="byte" min="0" max="10" value="2">
+      <Help>
+	0=disable, 1-10
+	Unit is 1V (1 - 10V).
+      </Help>
+    </Value>
+    <Value genre="config" index="21" label="Time interval for periodicactive report of Meter " size="4" type="int" min="60" max="2678400" value="600">
+      <Help>
+	60-2678400
+	Unit is S (60S - 31Days).
+      </Help>
+    </Value>
+    <Value genre="config" index="22" label="OLED display brightnes " max="2" min="0" size="1" type="list" value="2">
+      <Help>OLED panel brightnes when operated.</Help>
+      <Item label="Low" value="0"/>
+      <Item label="Mid" value="1"/>
+      <Item label="High" value="2"/>
+    </Value>
+    <Value genre="config" index="23" label="OLED Display Temperature " max="3" min="1" size="1" type="list" value="0">
+      <Help>Select which sensor temperature to show on OLED display.</Help>
+      <Item label="room sensor" value="0"/>
+      <Item label="floor sensor" value="1"/>
+    </Value>
+    <Value genre="config" index="24" label="Time zone " size="1" type="byte" min="-12" max="12" value="0">
+      <Help>-12H to +12H relative to UTC.</Help>
+    </Value>
+    <Value genre="config" index="25" label="OLED Display Auto off function " max="1" min="0" size="1" type="list" value="0">
+      <Help>Enable or disable display auto off when interface is standby interface.</Help>
+      <Item label="disable" value="0"/>
+      <Item label="enable" value="1"/>
+    </Value>
+  </CommandClass>
+
+  <CommandClass id="113">
+    <Compatibility>
+      <GetSupported>false</GetSupported>
+    </Compatibility>
+  </CommandClass>
+  <!-- The Association Group Information -->
+  <CommandClass id="133">
+    <Associations num_groups="2">
+      <Group index="1" label="LifeLine" max_associations="5"/>
+      <Group index="2" label="Heat set" max_associations="5"/>
+    </Associations>
+  </CommandClass>
+  <CommandClass id="96">
+    <Compatibility>
+      <MapRootToEndpoint>true</MapRootToEndpoint>
+    </Compatibility>
+  </CommandClass>
+</Product>
diff --git a/cpp/build/testconfigversions.cfg b/cpp/build/testconfigversions.cfg
index 8f0d581d4d..d359ef76a5 100644
--- a/cpp/build/testconfigversions.cfg
+++ b/cpp/build/testconfigversions.cfg
@@ -1964,8 +1964,8 @@
                                                    'md5' => '4d34aeaaea917c229bedbb737e4de1550b2d7db5f9e61566a1c0a39966b6442d381d01f93714e12aae1404797d36854274cc4063dd7424b00d27da238b17a36a'
                                                  },
                'config/manufacturer_specific.xml' => {
-                                                       'Revision' => 171,
-                                                       'md5' => 'ad06ce14f7a9a06a7ca99ce01632f0b95b580069c58a0ed0ec343594306603749799f00d27fa432a08582f9be08be339388bd3b854485e51e8cde086dd6c6e3d'
+                                                       'Revision' => 172,
+                                                       'md5' => '7402d7f06b64883fc9f90d175123bd752da478d94566bb5e54ce7dc9808c88601bf0120882963d856fcfbb233b65eba98fbe8cb4cd505b557457bbfb4a2eee29'
                                                      },
                'config/mcohome/a8-9.xml' => {
                                               'Revision' => 1,
@@ -2091,6 +2091,10 @@
                                                 'Revision' => 1,
                                                 'md5' => '10edb9b98013bac7754fd68151bef8b684dff2ad17d14b71cd6831f386a1e98aef64ff83138cdd28bf6bd1ab6526ca40b87e310beed25e9ed4a857b21e689b3f'
                                               },
+               'config/namron/4512744.xml' => {
+                                                'Revision' => 1,
+                                                'md5' => '8b9f95356a2484a4b0108950255e4a6f95f91f9a46a5ccc0b5ee109bea6f98ba43e8aed0a7076cc6ee0110f3fbadf47accf1e5b0f9049eea7879f6cfd2c00166'
+                                              },
                'config/nei/ms11z.xml' => {
                                            'Revision' => 1,
                                            'md5' => '798d15de5a67cd238320459d17b73b168fdc269de623ccaf21d84c84d353fdb15efb693c10bf43075e555b7011344200e8111352250bc7bf688f4298d981e8b2'
diff --git a/distfiles.mk b/distfiles.mk
index 44e360c413..c50c0b2179 100644
--- a/distfiles.mk
+++ b/distfiles.mk
@@ -837,6 +837,7 @@ DISTFILES =	.gitignore \
 	config/images/namron/4512715.png \
 	config/images/namron/4512720.jpg \
 	config/images/namron/4512724.png \
+	config/images/namron/4512744.png \
 	config/images/nexia/db100z.png \
 	config/images/nexia/th100nx.png \
 	config/images/nodon/asp3100SmartPlug.png \
@@ -1190,6 +1191,7 @@ DISTFILES =	.gitignore \
 	config/namron/4512715.xml \
 	config/namron/4512720.xml \
 	config/namron/4512724.xml \
+	config/namron/4512744.xml \
 	config/nei/ms11z.xml \
 	config/nexia/db100z.xml \
 	config/nexia/th100nx.xml \