I'm Stuck

[brendonc75]

Hellos Everyone.

For the Last 2 Weeks I've to trying and trying to get this right, either I'm just clueless or very lost ( SAME SAME at this point)

Ive followed every part of the video and read everything,

below i have copied the yaml code from Pai

can someone have a look and let me know what im doing wrong

MG5050 V: 7.01.012
Ip150 V : 5.02.058

LOGGING_LEVEL_CONSOLE: 20
LOGGING_LEVEL_FILE: 40
CONNECTION_TYPE: IP
SERIAL_PORT: /dev/ttyUSB0
SERIAL_BAUD: 9600
IP_CONNECTION_HOST: 192.168.0.250
IP_CONNECTION_PORT: 10000
IP_CONNECTION_PASSWORD: "paradox"
KEEP_ALIVE_INTERVAL: 10
LIMITS:
zone: auto
user: 1-10
door: ""
pgm: 1-5
partition: auto
module: ""
repeater: ""
keypad: ""
key-switch: ""
SYNC_TIME: true
SYNC_TIME_MIN_DRIFT: 120
PASSWORD: "0000"
MQTT_ENABLE: true
MQTT_HOST: core-mosquitto
MQTT_PORT: 1883
MQTT_KEEPALIVE: 60
MQTT_USERNAME: Pai
MQTT_PASSWORD: Pai
MQTT_HOMEASSISTANT_AUTODISCOVERY_ENABLE: false
COMMAND_ALIAS:
arm: partition all arm
disarm: partition all disarm
MQTT_COMMAND_ALIAS:
armed_home: arm_stay
armed_night: arm_sleep
armed_away: arm
disarmed: disarm
HOMEASSISTANT_NOTIFICATIONS_EVENT_FILTERS:

• live,alarm,-restore
• trouble,-clock
• live,tamper
  HOMEASSISTANT_PUBLISH_PARTITION_PROPERTIES:
• target_state
• current_state
  HOMEASSISTANT_PUBLISH_ZONE_PROPERTIES:
• open
• tamper
  PUSHBULLET_CONTACTS: []
  PUSHBULLET_EVENT_FILTERS:
• live,alarm,-restore
• trouble,-clock
• live,tamper
  PUSHOVER_EVENT_FILTERS:
• live,alarm,-restore
• trouble,-clock
• live,tamper
  PUSHOVER_BROADCAST_KEYS: []
  SIGNAL_CONTACTS: []
  SIGNAL_EVENT_FILTERS:
• live,alarm,-restore
• trouble,-clock
• live,tamper

GSM_CONTACTS: []
GSM_EVENT_FILTERS:

• live,alarm,-restore
• trouble,-clock
• live,tamper
  IP_INTERFACE_ENABLE: false
  IP_INTERFACE_PASSWORD: paradox
  DUMMY_EVENT_FILTERS: []
  

[yozik04]

According to the provided log your IP150 does not respond.

[yozik04]

try
$ telnet 192.168.0.250 10000
Will it bring up the connection? If not then it is not PAI to blame.

[brendonc75]

ok i will check, if that is the case what can i do?

[brendonc75]

Afternoon All, so i managed to get connect to my panel, i have a port error on the Ip150 Module, however i now have an authentication Error ( Invalid Pc Password, Default is " 0000 "

[yozik04]

Try 'aaaa'

[brendonc75]

100% thank you very very much.. after 5 months of locking myself out every time.
thank you very much once again

[yozik04]

These MG models some times want 'a' instead of '0'. No idea why. I could not figure out a pattern.