PPSK - If not using radius- it allows only one use

[nitinuae]

Hello
I am trying to use PPSK without Radius and have PPSKs defined with Vlan also defined. Single SSID.

These are the issuse I am facing -

1. The switch (to which openwrt is connected) HAS to be put in General mode (with all VLANS as untagged). I thought that since radiusdesk allows dynamic vlan in the PPSK option (and single bridge which is attached to the SSID), the packets coming out of openwrt should have been tagged (they are not)
2. The PPSK is single use only. If one use has used a PPSK, another device with same credentials donot get IP. The log says authenticated but is unable to be put in proper VLAN for dhcp to be seen). Is there any mysql check (like you have explained earlier - alter table permanent_users modify ppsk VARCHAR(100) NULL;
   to solve this issue.

PS - I am unable to get Radius with PPSK however I try. It seems the option 3 is not picked up by openwrt 23.0.5 and a patch may be manually needed in the hostapd. I would like to have Radius with PPSK - but unable to.

Editing it - tested with different password - but same VLAN - This is the issue.
So - Its not the PPSK which is used - It seems once a vlan bridge is created, it cannot be reused. VLAN is single use !!